Re: 'Device not ready' issue on mpt2sas since 3.1.10

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/09/2012 08:21 PM, Matthias Prager wrote:
>
> I haven't checked the scsi logging side, but about the only commands
> that wake up the disks are 'smartctl -a /dev/sda' and 'sg_start'
> (smartcl maybe issuing a START UNIT command on it's own).

smartctl -a does appear to wake the disks.  The scsi log shows an
IDENTIFY and then several ATA passthrough commands (one of which takes
~10 seconds to complete).  So, I don't see an explicit START UNIT, but
one of those ATA commands which I didn't decode could certainly trigger
the wakeup.

-- Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux