-----Original Message-----
From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
To: Mike Christie <michaelc@xxxxxxxxxxx>
Cc: Admin <vikas.chaudhary@xxxxxxxxxx>, scsi <linux-scsi@xxxxxxxxxxxxxxx>,
Lalit Chandivade <lalit.chandivade@xxxxxxxxxx>, Ravi Anand
<ravi.anand@xxxxxxxxxx>, Tej Parkash <tej.parkash@xxxxxxxxxx>, Shyam
Sundar <shyam.sundar@xxxxxxxxxx>
Subject: Re: [PATCH 5/6] qla4xxx: Capture minidump for ISP82XX on firmware
failure
>On Fri, 2012-04-27 at 11:05 -0500, Mike Christie wrote:
>> On 04/24/2012 12:32 AM, vikas.chaudhary@xxxxxxxxxx wrote:
>> > +
>> > +static ssize_t
>> > +qla4_8xxx_sysfs_write_fw_dump(struct file *filep, struct kobject
>>*kobj,
>> > + struct bin_attribute *ba, char *buf, loff_t off,
>> > + size_t count)
>> > +{
>> > + struct scsi_qla_host *ha =
>>to_qla_host(dev_to_shost(container_of(kobj,
>> > + struct device, kobj)));
>> > + uint32_t dev_state;
>> > + int reading;
>> > +
>> > + if (!is_qla8022(ha))
>> > + return -EINVAL;
>> > +
>> > + if (off != 0)
>> > + return 0;
>> > +
>> > + reading = simple_strtol(buf, NULL, 10);
>>
>> I think we are supposed to be using kstrtol now.
>
>We are. Checkpatch even warns about this, please fix.
We have posted updated patch to scsi-list here:-
http://marc.info/?l=linux-scsi&m=133733192809849&w=2
In 1st version of patch we used simple_strtol() as sysfs attribute buffer
is not NULL terminated string and
it include some garbage characters because of this kstrtol() fails.
If I write "5" to sysfs attribute I am getting following string in buf:-
-------------------------------------------
May 18 12:07:54 magana kernel: buf: 5
May 18 12:07:54 magana kernel: ter-| Receive
| Transmit
May 18 12:07:54 magana kernel: face |bytes packets errs drop fifo frame
compressed multicast|bytes packets errs drop fifo colls carrier
compressed
May 18 12:07:54 magana kernel: eth2: 520166 5418 0 0 0 0
0 325 393879 1978 0 0 0 0 0
0
May 18 12:07:54 magana kernel: eth3: 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0
May 18 12:07:54 magana kernel: eth4: 1398425 18696 0 0 0 0
0 0 7631 39 0 0 0 0 0
0
May 18 12:07:54 magana kernel: eth5: 1394451 18678 0 0 0 0
0 0 6427 30 0 0 0 0 0
0
May 18 12:07:54 magana kernel: lo: 361420 1082 0 0 0 0
0 0 361420 1082 0 0 0 0 0
0
May 18 12:07:54 magana kernel: virbr0-nic: 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0
May 18 12:07:54 magana kernel: virbr0: 0 0 0 0 0
0 0 0 0
-------------------------------------------
As we are getting garbage characters after "5", kstrtol() fails but
simple_strtol() works well.
I posted email for same to scsi-list here:-
http://marc.info/?l=linux-scsi&m=133612575603304&w=2
For now in updated patch I am writing "0" at sysfs attribute buf[1] as we
are interested only in buf[0] and after this change kstrtol() works well.
I am interested to know if the behavior of sysfs attribute is correct or
is it an issue?
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
