Re: [RFC v2 PATCH 2/4] block: add queue runtime pm callbacks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 17 May 2012, Lin Ming wrote:

> Add runtime pm suspend/resume callbacks to request queue.
> As an example, implement these callbacks in sd driver.

This is not the way to do it.  The block subsystem should not use 
suspend/resume callbacks.

Instead, there should be block functions that can be called by client
drivers: block_pre_runtime_suspend, block_post_runtime_suspend,
bock_pre_runtime_resume, and block_post_runtime_resume.

They should do something like this:

	block_pre_runtime_suspend:
		If any requests are in the queue, return -EBUSY.
		Otherwise set q->rpm_status to RPM_SUSPENDING and
		return 0.

	block_post_runtime_suspend:
		If the suspend succeeded then set q->rpm_status to 
		RPM_SUSPENDED.  Otherwise set it to RPM_ACTIVE and
		call pm_runtime_mark_last_busy().

	block_pre_runtime_resume:
		Set q->rpm_status to RPM_RESUMING.

	block_post_runtime_resume:
		If the resume succeeded then set q->rpm_status to
		RPM_ACTIVE and call pm_runtime_mark_last_busy() and
		pm_runtime_request_autosuspend().
		Otherwise set q->rpm_status to RPM_SUSPENDED.

There should also be an initialization function for client drivers to
call.  block_runtime_pm_init() should call pm_runtime_mark_last_busy(),
pm_runtime_use_autosuspend(), and pm_runtime_autosuspend().

Next, you have to modify the parts of the block layer that run when a 
new request is added to the queue or a request is removed.

	When a request is added:
		If q->rpm_status is RPM_SUSPENDED, or if q->rpm_status
		is RPM_SUSPENDING and the REQ_PM flag isn't set, call
		pm_runtime_request_resume().

	When a request finishes:
		Call pm_runtime_mark_last_busy().

Next, you have to change the parts of the block layer responsible for
taking a request from the queue and handing it to the lower-level
driver (both peek and get).  If q->rpm_status is RPM_SUSPENDED, they
shouldn't do anything -- act as though the queue is empty.  If
q->rpm_status is RPM_SUSPENDING or RPM_RESUMING, they should hand over
the request only if it has the REQ_PM flag set.

For this to work, the block layer has to know what struct device
pointer to pass to the pm_runtime_* routines.  You'll have to add that
information to the request_queue structure; I guess q->dev can get set
by block_pm_runtime_init().  In fact, when that's done you won't need
q->rpm_status any more.  You'll be able to use q->dev->power.rpm_status
directly, and you won't have to update it because the PM core does that
for you.

(Or maybe it would be easier to make q->rpm_status be a pointer to 
q->dev->power.rpm_status.  That way, if CONFIG_PM_RUNTIME isn't enabled 
or block_runtime_pm_init() hasn't been called, you can have 
q->rpm_status simply point to a static value that is permanently set to 
RPM_ACTIVE.)

I may have left some parts out from this brief description.  Hopefully 
you'll be able to figure out the general idea and get it to work.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux