On 15 May 2012 09:02, Namjae Jeon <linkinjeon@xxxxxxxxx> wrote: > 2012/5/15, Girish K S <girish.shivananjappa@xxxxxxxxxx>: >> Sorry , >> I will rebase them to James' for-next treee. and resend >> >> thanks and regards >> Girish K S > There is one more thing. > You add your module author name. > But module author name should be only one per one module. > Your author name will be comflicted with origianl author(santosh, vinayak). > plz try to check like this. maybe you can see your name instread > original author. > /sbin/modinfo ufshcd.ko If i build ufshcd.ko ufshcd-pci.ko ufshcd-pltfm.ko, then i can see only my name in the ufshcd-*.ko which is added by me. But not in ufshcd.ko Is it a problem? > > Thanks. >> >> On 15 May 2012 07:08, Namjae Jeon <linkinjeon@xxxxxxxxx> wrote: >>> Hi. Girish. >>> >>> There are hunks when I try to patch. >>> have you created patches on linux-next ? >>> >>> patching file drivers/scsi/ufs/ufs.h >>> patching file drivers/scsi/ufs/ufshcd.c >>> Hunk #10 FAILED at 826. >>> Hunk #13 FAILED at 929. >>> Hunk #15 succeeded at 1050 with fuzz 1 (offset 2 lines). >>> Hunk #17 succeeded at 1193 (offset 2 lines). >>> Hunk #19 succeeded at 1392 (offset 2 lines). >>> Hunk #21 succeeded at 1571 (offset 2 lines). >>> Hunk #23 succeeded at 1644 (offset 2 lines). >>> Hunk #25 FAILED at 1724. >>> 3 out of 25 hunks FAILED -- saving rejects to file >>> drivers/scsi/ufs/ufshcd.c.rej >>> >>> And after testing, have you sent this patch ? >>> >>> Thanks. >>> >>> 2012/5/14, Girish K S <girish.shivananjappa@xxxxxxxxxx>: >>>> The existing UFS driver is tightly bound to only pci specific devices. >>>> It cannot work for non-pci devices. >>>> >>>> "SCSI: UFS: remove all pci code from core driver" patch removes all the >>>> pci specific code from the core driver to make it generic >>>> >>>> "SCSI: UFS: Add support for pci probe" patch adds a new file to support >>>> pci probing. >>>> >>>> "SCSI: UFS: Add platform support for ufs host controller" patch adds a >>>> new >>>> file to support platform device probe >>>> >>>> "SCSI: UFS: Added support of PCI/PLTFM for UFS" patch adds the menu >>>> option >>>> in Kconfig and Makefile to enable/disable the specific option >>>> >>>> Girish K S (4): >>>> SCSI: UFS: remove all pci code from core driver >>>> SCSI: UFS: Add support for pci probe >>>> SCSI: UFS: Add platform support for ufs host controller >>>> SCSI: UFS: Added support of PCI/PLTFM for UFS >>>> >>>> drivers/scsi/ufs/Kconfig | 32 +++- >>>> drivers/scsi/ufs/Makefile | 2 + >>>> drivers/scsi/ufs/ufs.h | 103 +++++++++++ >>>> drivers/scsi/ufs/ufshcd-pci.c | 217 ++++++++++++++++++++++ >>>> drivers/scsi/ufs/ufshcd-pltfm.c | 191 ++++++++++++++++++++ >>>> drivers/scsi/ufs/ufshcd.c | 377 >>>> +++++++++------------------------------ >>>> 6 files changed, 623 insertions(+), 299 deletions(-) >>>> create mode 100644 drivers/scsi/ufs/ufshcd-pci.c >>>> create mode 100644 drivers/scsi/ufs/ufshcd-pltfm.c >>>> >>>> -- >>>> 1.7.4.1 >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in >>>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> >> -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
