Re: [RFC][PATCH] libata: enable SATA disk fua detection on default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 09, 2012 at 08:48:04PM +0800, Zheng Liu wrote:
> Thanks for your explanation.  It seems that there still has a problem.
> If I set the disk to write through mode, I need to modify my application
> to remove all of flush/sync operations.  It is unacceptable for us.

You don't have to - the kernel will not send a SYNCHRONIZE CACHE command
unless the disk advertises a write back cache.

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux