-----Original Message----- >From: James Bottomley [mailto:James.Bottomley@xxxxxxxxxxxxxxxxxxxxx] >Sent: Wednesday, April 25, 2012 1:23 AM >To: michaelc@xxxxxxxxxxx >Cc: linux-scsi@xxxxxxxxxxxxxxx; Kallickal, Jayamohan; Tran, Minh >Subject: Re: [PATCH 10/17] be2iscsi: Update in Copyright information >On Tue, 2012-04-03 at 23:41 -0500, michaelc@xxxxxxxxxxx wrote: > From: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxx> > > change from Serverengines to Emulex >Slightly confused by the description. The patch has nothing to do with copyrights. It updates the module author driver name and scsi host template to show Emulex, but doesn't >touch any copyrights (which all show Emulex anyway thanks to a prior patch). >James Yes, the subject in the patch should not have mentioned copyright. Actually, the patch modifies some fields that were missed out when updating from serverengines to Emulex Corporation Jay > Signed-off-by: Minh Tran <MinhDuc.Tran@xxxxxxxxxx> > Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxx> > Signed-off-by: Mike Christie <michaelc@xxxxxxxxxxx> > --- > drivers/scsi/be2iscsi/be_cmds.h | 2 +- > drivers/scsi/be2iscsi/be_main.c | 4 ++-- > drivers/scsi/be2iscsi/be_main.h | 4 ++-- > 3 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/scsi/be2iscsi/be_cmds.h > b/drivers/scsi/be2iscsi/be_cmds.h index 8b40a5b..c85d73c 100644 > --- a/drivers/scsi/be2iscsi/be_cmds.h > +++ b/drivers/scsi/be2iscsi/be_cmds.h > @@ -23,7 +23,7 @@ > * firmware in the BE. These requests are communicated to the processor > * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one > * WRB inside a MAILBOX. > - * The commands are serviced by the ARM processor in the BladeEngine's MPU. > + * The commands are serviced by the ARM processor in the OneConnect's MPU. > */ > struct be_sge { > u32 pa_lo; > diff --git a/drivers/scsi/be2iscsi/be_main.c > b/drivers/scsi/be2iscsi/be_main.c index 2d76cb5..82d933c 100644 > --- a/drivers/scsi/be2iscsi/be_main.c > +++ b/drivers/scsi/be2iscsi/be_main.c > @@ -48,7 +48,7 @@ static unsigned int num_hba = 0; > > MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table); > MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR); > -MODULE_AUTHOR("ServerEngines Corporation"); > +MODULE_AUTHOR("Emulex Corporation"); > MODULE_LICENSE("GPL"); > module_param(be_iopoll_budget, int, 0); module_param(enable_msix, > int, 0); @@ -391,7 +391,7 @@ MODULE_DEVICE_TABLE(pci, > beiscsi_pci_id_table); > > static struct scsi_host_template beiscsi_sht = { > .module = THIS_MODULE, > - .name = "ServerEngines 10Gbe open-iscsi Initiator Driver", > + .name = "Emulex 10Gbe open-iscsi Initiator Driver", > .proc_name = DRV_NAME, > .queuecommand = iscsi_queuecommand, > .change_queue_depth = iscsi_change_queue_depth, diff --git > a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h > index 50f231f..49289ef 100644 > --- a/drivers/scsi/be2iscsi/be_main.h > +++ b/drivers/scsi/be2iscsi/be_main.h > @@ -35,8 +35,8 @@ > #include "be.h" > #define DRV_NAME "be2iscsi" > #define BUILD_STR "4.1.239.0" > -#define BE_NAME "ServerEngines BladeEngine2" \ > - "Linux iSCSI Driver version" BUILD_STR > +#define BE_NAME "Emulex OneConnect" \ > + "Open-iSCSI Driver version" BUILD_STR > #define DRV_DESC BE_NAME " " "Driver" > > #define BE_VENDOR_ID 0x19A2 ��.n��������+%������w��{.n�����{������ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f