Hi Kai: Thanks for your response ... On 02/28/2012 11:40 AM, Kai Makisara wrote: > On Wed, 15 Feb 2012, Lee Duncan wrote: > >> The st tape driver recently added the MTWEOFI ioctl, which writes >> a tape filemark (EOF), like the MTWEOF ioctl, except that MTWEOFI >> returns immediately. This makes certain applications, like backup >> software, run much more quickly on buffered tape drives. >> >> Since legacy applications do not know about this new MTWEOFI ioctl, >> this patch adds a new flag that tells the st driver to return >> immediately when writing an EOF (i.e. a filemark). This new flag >> is much like the existing flag that tells the st driver to perform >> writes (and certain other IOs) immediately, but this new flag only >> applies to writing EOFs. >> >> This new feature can be enabled via a new module flag: st_nowait_eof. >> It can also be set or cleared via the MTSETDRVBUFFER ioctl, using >> the newly-defined MT_ST_NOWAIT_EOF flag. >> >> Lastly, this new feature is displayed via the sysfs tape "options" >> attribute. >> >> Signed-off-by: Lee Duncan <lduncan@xxxxxxxx> >> --- >> Documentation/scsi/st.txt | 2 ++ >> drivers/scsi/st.c | 24 +++++++++++++++++++++--- >> drivers/scsi/st.h | 1 + >> include/linux/mtio.h | 1 + >> 4 files changed, 25 insertions(+), 3 deletions(-) >> >> diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt >> index 691ca29..85c1b1a 100644 >> --- a/Documentation/scsi/st.txt >> +++ b/Documentation/scsi/st.txt >> @@ -390,6 +390,8 @@ MTSETDRVBUFFER >> MT_ST_SYSV sets the SYSV semantics (mode) >> MT_ST_NOWAIT enables immediate mode (i.e., don't wait for >> the command to finish) for some commands (e.g., rewind) >> + MT_ST_NOWAIT_EOF enables immediate filemark mode (i.e. when >> + writing a filemark, don't wait for it to complete) > > You could add a note that errors before EOF may not be noticed. I will be glad to add such a note. > >> MT_ST_SILI enables setting the SILI bit in SCSI commands when >> reading in variable block mode to enhance performance when >> reading blocks shorter than the byte count; set this only >> diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c >> index 9b28f39..f18d10b 100644 >> --- a/drivers/scsi/st.c >> +++ b/drivers/scsi/st.c >> @@ -81,6 +81,7 @@ static int max_sg_segs; >> static int try_direct_io = TRY_DIRECT_IO; >> static int try_rdio = 1; >> static int try_wdio = 1; >> +static int st_nowait_eof; >> >> static int st_dev_max; >> static int st_nr_dev; >> @@ -103,6 +104,8 @@ module_param_named(max_sg_segs, max_sg_segs, int, 0); >> MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)"); >> module_param_named(try_direct_io, try_direct_io, int, 0); >> MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)"); >> +module_param_named(st_nowait_eof, st_nowait_eof, int, 0); >> +MODULE_PARM_DESC(st_nowait_eof, "Do not wait when writing EOF (filemark) (0)"); >> > > I think this should not be a module option. The property should be > settable only as a mode option like other options of this kind. > (I may have not written this clearly in my previous reply). > I respectfully disagree. There are legacy applications, such as the IBM network backup program that sparked this bug fix. Such applications do not know about the capability added by this patch, just as they do not know about the relatively new MTWEOFI ioctl. Hence the module option is a convenient method for such applications to achieve increased throughput. I agree there is a small risk of loosing errors or error context when writing immediate filemarks, but is the same problem that already exists in the case of the MTWEOFI ioctl. I would be glad to add a section in the st documentation that mentions the dangers of writing immediate filemarks, if you think that would help clarify usage of this feature. > Otherwise the patch looks good. > -- Lee Duncan SUSE Labs -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
