On Friday, February 17, 2012, Lin Ming wrote:
> On Thu, 2012-02-16 at 10:13 -0500, Alan Stern wrote:
> > On Thu, 16 Feb 2012, Zhang Rui wrote:
> >
> > > > I'm not exactly sure what you're trying to achieve and what you mean by
> > > > "resume a device directly"? Do you want to run the device's resume
> > > > callback at the time when another device is being resumed?
> > > >
> > > I mean, wakeup event is sent to ATA port, but our goal is to resume
> > > ZPODD after receiving this wakeup event.
> > > Ideally, it is ACPI that resumes ATA port. And then, the ATA port
> > > runtime resumes ZPODD. But this does not look good to runtime resume a
> > > child device in the parent's .runtime_resume callback.
> > > So I introduced these two APIs so that an runtime_resume request can be
> > > sent to ZPODD directly and the runtime PM core can resume all the
> > > parents of ZPODD automatically.
> >
> > It's not clear what you're trying to achieve. Do you basically want
> > the ZPODD always to be suspended and resumed along with the ATA port,
> > or should it be possible to suspend the ZPODD while the port remains
> > running?
>
> We want to ZPODD always to be suspended and resumed along with the ATA
> port.
>
> Below is part of the GPE handler for ZPODD device attention event.
>
> Scope (\_GPE)
> {
> Method (_L13, 0, NotSerialized)
> {
> ADBG ("ZPODD DA Event")
> ....
>
> Notify (\_SB.PCI0.SAT0.PRT2, 0x02)
> ....
> }
> }
>
> It maybe a bit confused, but actually, \_SB.PCI0.SAT0.PRT2 is bind to
> the attached device, not the ata port itself.
>
> See below commit in linux-next tree.
> 75d22c(libata: Bind the Linux device tree to the ACPI device tree)
>
> And below notify handler(PATCH 6) will resume the attached device(CDROM
> in ZPODD case).
>
> +static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
> +{
> + struct ata_device *ata_dev = context;
> +
> + if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev)
> + scsi_autopm_get_device(ata_dev->sdev);
> +}
> +
>
> But the code to power on/power off the device is in ata_acpi_set_state,
> which is called when ata port is resumed/suspended.
>
> ata_eh_handle_port_resume/suspend
> ata_acpi_set_state
> ata_for_each_dev {
> acpi_bus_set_power(<the acpi handle of the device>, acpi_state)
> }
>
> Could you take a look at PATCH 6?
> It's more clear over there.
It seems that you can use pm_runtime_no_callbacks() to work around this
as suggested by Alan.
Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
