Changes since v7: http://marc.info/?l=linux-scsi&m=132739159230095&w=2 1/ Dropped "libsas: feed the scsi_block_when_processing_errors() meter" [1]. Patches 1-3 are just resends of the patches affected by that rebase. 2/ Fixed up the phy identify data that is exported to userspace. sas_phy/phyX/device_type and sas_phy/phyX/target_port_protocols are now populated more reliably. Patches 4-5 3/ User-disabled ssp phys are now no longer inadvertantly re-enabled by error recovery (they need an explicit reset from userspace). This enables scripted hotplug testing. Patches 6-8 4/ Fixed up the eh_strategy_handlers to prevent them being called from outside eh context, added an abort handler, and made sure all resets are notified to the lldd. Patches 9-12 5/ A small diet for sas_task to move slow path infrastructue out of the fast path use case. Patch 13 [1]: http://marc.info/?l=linux-scsi&m=132677728817896&w=2 --- [PATCH 01/13] libsas: close scsi_remove_target() vs libata-eh race [PATCH 02/13] libsas: improve debug statements [PATCH 03/13] libsas: async ata scanning [PATCH 04/13] libsas: set attached device type and target protocols for local phys [PATCH 05/13] libsas: fixup target_port_protocols for expanders that don't report sata [PATCH 06/13] libsas: don't recover end devices attached to disabled phys [PATCH 07/13] scsi_transport_sas: 'enable' phys on reset [PATCH 08/13] libsas: libsas.force_hard_reset module parameter [PATCH 09/13] libsas: enforce eh strategy handlers only in eh context [PATCH 10/13] libsas: add sas_eh_abort_handler [PATCH 11/13] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler [PATCH 12/13] isci: use sas eh strategy handlers [PATCH 13/13] libsas: trim sas_task of slow path infrastructure The following changes since commit d65b4e98d7ea3038b767b70fe8be959b2913f16d: Linux 3.3-rc3 (2012-02-08 19:21:53 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git libsas-eh-reworks-v8 Dan Williams (58): libsas: remove unused ata_task_resp fields libsas: kill sas_slave_destroy libsas: fix domain_device leak libsas: fix leak of dev->sata_dev.identify_[packet_]device libsas: replace event locks with atomic bitops libsas: convert ha->state to flags libsas: introduce sas_drain_work() libsas: remove ata_port.lock management duties from lldds libsas: convert dev->gone to flags libsas: prevent domain rediscovery competing with ata error handling libsas: use ->set_dmamode to notify lldds of NCQ parameters libsas: kill invocation of scsi_eh_finish_cmd from sas_ata_task_done libsas: close error handling vs sas_ata_task_done() race libsas: prevent double completion of scmds from eh libsas: fix timeout vs completion race libsas: let libata handle command timeouts libsas: defer SAS_TASK_NEED_DEV_RESET commands to libata libsas: use libata-eh-reset for sata rediscovery fis transmit failures libsas: perform sas-transport resets in shost->workq context libsas: execute transport link resets with libata-eh via host workqueue libsas: sas_phy_enable via transport_sas_phy_reset libsas: async ata-eh libsas: poll for ata device readiness after reset libsas: don't mark expanders as gone when a child device is removed libsas: check for 'gone' expanders in smp_execute_task() libsas: fix sas_find_local_phy(), take phy references libsas: don't recover 'gone' devices in sas_ata_hard_reset() isci: kill iphy->isci_port lookups isci: kill isci_port->status isci: fix interpretation of "hard" reset isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset isci: ->lldd_ata_check_ready handler isci: remove bus and reset handlers isci: remove IDEV_EH hack to disable "discovery-time" ata resets libsas: pre-clean commands that won the eh vs completion race libsas: mark all domain devices gone if root port disappears libsas: close scsi_remove_target() vs libata-eh race libsas: fix mixed topology recovery libsas: route local link resets through ata-eh libsas: fix sas_unregister_ports vs sas_drain_work libsas: improve debug statements libsas: fix sas port naming libsas: let libata recover links that fail to transmit initial sig-fis libsas: delete device on sas address changed libsas: restore scan order libsas: async ata scanning libsas: fix lifetime of SAS_HA_FROZEN libsas: revert ata srst libsas: set attached device type and target protocols for local phys libsas: fixup target_port_protocols for expanders that don't report sata libsas: don't recover end devices attached to disabled phys scsi_transport_sas: 'enable' phys on reset libsas: libsas.force_hard_reset module parameter libsas: enforce eh strategy handlers only in eh context libsas: add sas_eh_abort_handler libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler isci: use sas eh strategy handlers libsas: trim sas_task of slow path infrastructure Jeff Skirvin (2): libsas: Remove redundant phy state notification calls. libsas: add mutex for SMP task execution Maciej Trela (1): libsas: kill spurious sas_put_device Documentation/kernel-parameters.txt | 6 + Documentation/scsi/libsas.txt | 15 - drivers/ata/libata-core.c | 34 +- drivers/ata/libata-eh.c | 1 + drivers/ata/libata-scsi.c | 13 + drivers/ata/libata.h | 2 +- drivers/scsi/aic94xx/aic94xx.h | 2 + drivers/scsi/aic94xx/aic94xx_dev.c | 38 +- drivers/scsi/aic94xx/aic94xx_init.c | 6 +- drivers/scsi/aic94xx/aic94xx_tmf.c | 11 +- drivers/scsi/isci/host.c | 8 +- drivers/scsi/isci/host.h | 19 +- drivers/scsi/isci/init.c | 17 +- drivers/scsi/isci/phy.c | 18 +- drivers/scsi/isci/phy.h | 1 - drivers/scsi/isci/port.c | 217 +++++----- drivers/scsi/isci/port.h | 11 +- drivers/scsi/isci/remote_device.c | 32 +- drivers/scsi/isci/remote_device.h | 7 +- drivers/scsi/isci/request.c | 198 +-------- drivers/scsi/isci/request.h | 9 +- drivers/scsi/isci/task.c | 158 ++------ drivers/scsi/isci/task.h | 40 -- drivers/scsi/libsas/sas_ata.c | 827 +++++++++++++++++------------------ drivers/scsi/libsas/sas_discover.c | 216 ++++++++-- drivers/scsi/libsas/sas_event.c | 96 ++++- drivers/scsi/libsas/sas_expander.c | 360 ++++++++++------ drivers/scsi/libsas/sas_host_smp.c | 11 +- drivers/scsi/libsas/sas_init.c | 243 +++++++++-- drivers/scsi/libsas/sas_internal.h | 97 +++-- drivers/scsi/libsas/sas_phy.c | 12 +- drivers/scsi/libsas/sas_port.c | 32 +- drivers/scsi/libsas/sas_scsi_host.c | 421 +++++++++---------- drivers/scsi/mvsas/mv_init.c | 2 - drivers/scsi/mvsas/mv_sas.c | 31 +- drivers/scsi/pm8001/pm8001_init.c | 2 - drivers/scsi/pm8001/pm8001_sas.c | 59 ++-- drivers/scsi/scsi_transport_sas.c | 60 +++- include/linux/libata.h | 2 + include/scsi/libsas.h | 86 +++-- include/scsi/sas.h | 4 +- include/scsi/sas_ata.h | 44 ++- include/scsi/scsi_transport_sas.h | 12 +- 43 files changed, 1859 insertions(+), 1621 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
