From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Don't use default 30 second mailbox-command timeout for these
serial requests, instead, limit the TMO to the standard 2*RATOV
plus some fudge-factor.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Signed-off-by: Chad Dupuis <chad.dupuis@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_mbx.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 61e2fb7..5470177 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1643,7 +1643,8 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
lg->port_id[1] = area;
lg->port_id[2] = domain;
lg->vp_index = vha->vp_idx;
- rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0);
+ rval = qla2x00_issue_iocb_timeout(vha, lg, lg_dma, 0,
+ (ha->r_a_tov / 10 * 2) + 2);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x1063,
"Failed to issue login IOCB (%x).\n", rval);
@@ -1906,8 +1907,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
lg->port_id[1] = area;
lg->port_id[2] = domain;
lg->vp_index = vha->vp_idx;
-
- rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0);
+ rval = qla2x00_issue_iocb_timeout(vha, lg, lg_dma, 0,
+ (ha->r_a_tov / 10 * 2) + 2);
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x106f,
"Failed to issue logout IOCB (%x).\n", rval);
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
