Add an st module option st_nowait_eof which defaults to 0. Setting this option to 1 tells the st driver not to wait when writing a filemark, which can result in much faster times on streaming tape drives. Legacy applications cannot take advantage of the newer MTWEOFI ioctl, so this patch gives such applications the ability to write an immediate EOF using the normal MTWEOF ioctl if they set st_nowait_eof=1. Reference: https://bugzilla.novell.com/show_bug.cgi?id=688996 Signed-off-by: Lee Duncan <lduncan@xxxxxxxx> --- drivers/scsi/st.c | 18 +++++++++++++++--- drivers/scsi/st.h | 1 + 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9b28f39..1dd617a 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -81,6 +81,7 @@ static int max_sg_segs; static int try_direct_io = TRY_DIRECT_IO; static int try_rdio = 1; static int try_wdio = 1; +static int st_nowait_eof = 0; static int st_dev_max; static int st_nr_dev; @@ -103,6 +104,8 @@ module_param_named(max_sg_segs, max_sg_segs, int, 0); MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)"); module_param_named(try_direct_io, try_direct_io, int, 0); MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)"); +module_param_named(st_nowait_eof, st_nowait_eof, int, 0); +MODULE_PARM_DESC(st_nowait_eof, "Do not wait when writing EOF (filemark) (0)"); /* Extra parameters for testing */ module_param_named(try_rdio, try_rdio, int, 0); @@ -1106,6 +1109,11 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) STp->drv_buffer)); } STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; + if (!STp->drv_buffer && STp->immediate_filemark) { + printk(KERN_WARNING "%s: non-buffered tape: " + "disabling writing immediate filemarks", name); + STp->immediate_filemark = 0; + } } st_release_request(SRpnt); SRpnt = NULL; @@ -1306,6 +1314,8 @@ static int st_flush(struct file *filp, fl_owner_t id) memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; + if (STp->immediate_filemark) + cmd[1] = 1; cmd[4] = 1 + STp->two_fm; SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, @@ -2172,8 +2182,8 @@ static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); printk(KERN_INFO - "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate, - STp->sili); + "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n", + name, STm->sysv, STp->immediate, STp->sili, STp->immediate_filemark); printk(KERN_INFO "%s: debugging: %d\n", name, debugging); } @@ -2705,7 +2715,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon cmd[0] = WRITE_FILEMARKS; if (cmd_in == MTWSM) cmd[1] = 2; - if (cmd_in == MTWEOFI) + if (cmd_in == MTWEOFI || + (cmd_in == MTWEOF && STp->immediate_filemark)) cmd[1] |= 1; cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); @@ -4084,6 +4095,7 @@ static int st_probe(struct device *dev) tpnt->scsi2_logical = ST_SCSI2LOGICAL; tpnt->sili = ST_SILI; tpnt->immediate = ST_NOWAIT; + tpnt->immediate_filemark = st_nowait_eof; tpnt->default_drvbuffer = 0xff; /* No forced buffering */ tpnt->partition = 0; tpnt->new_partition = 0; diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index f91a67c..24f97f1 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -120,6 +120,7 @@ struct scsi_tape { unsigned char c_algo; /* compression algorithm */ unsigned char pos_unknown; /* after reset position unknown */ unsigned char sili; /* use SILI when reading in variable b mode */ + unsigned char immediate_filemark; /* set immediate bit when writing filemark */ int tape_type; int long_timeout; /* timeout for commands known to take long time */ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
