Eric recently added ce59791936, which is a check that complains if we try to remove files from non-existent directories. When I remove a device (LSI SAS2008 in this case, but I don't know if it's specific to that), I hit that warning three times. Let me know if I can collect any more data. # lspci -s0000:08:00.0 08:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) # echo 0000:08:00.0 > /sys/bus/pci/drivers/mpt2sas/unbind [ 193.105962] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 193.111132] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 193.234690] ------------[ cut here ]------------ [ 193.239302] WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0xa4/0xb0() [ 193.249908] sysfs: can not remove 'bsg', no directory [ 193.254949] Modules linked in: w1_therm ds2482 wire msr cpuid e1000e bnx2x crc32c libcrc32c mdio ipv6 genrtc [ 193.265035] Pid: 15020, comm: bash Not tainted 3.3.0-smp-DEV #11 [ 193.271030] Call Trace: [ 193.273482] [<ffffffff8108de33>] warn_slowpath_common+0x83/0x120 [ 193.279558] [<ffffffff8108df86>] warn_slowpath_fmt+0x46/0x60 [ 193.285308] [<ffffffff81225d24>] sysfs_hash_and_remove+0xa4/0xb0 [ 193.291397] [<ffffffff81229eb6>] sysfs_remove_link+0x26/0x30 [ 193.297128] [<ffffffff8131041c>] bsg_unregister_queue+0xbc/0x100 [ 193.303224] [<ffffffff8143cb08>] sas_rphy_free+0xa8/0xe0 [ 193.308611] [<ffffffff8143d9c5>] sas_port_delete+0x35/0x170 [ 193.314266] [<ffffffff81229eb6>] ? sysfs_remove_link+0x26/0x30 [ 193.320187] [<ffffffff8146342a>] mpt2sas_transport_port_remove+0x15a/0x200 [ 193.327138] [<ffffffff8145bbdb>] _scsih_remove_device+0xbb/0xc0 [ 193.333147] [<ffffffff815f86d9>] _scsih_remove+0x294/0x343 [ 193.338719] [<ffffffff813404d7>] pci_device_remove+0x37/0x70 [ 193.344452] [<ffffffff813f621b>] __device_release_driver+0x7b/0xe0 [ 193.350708] [<ffffffff813f636d>] device_release_driver+0x2d/0x40 [ 193.356797] [<ffffffff813f5521>] driver_unbind+0xc1/0xe0 [ 193.362192] [<ffffffff813f473c>] drv_attr_store+0x2c/0x30 [ 193.367665] [<ffffffff812269b2>] sysfs_write_file+0xe2/0x170 [ 193.373404] [<ffffffff811ac0d8>] vfs_write+0xc8/0x190 [ 193.378531] [<ffffffff811ac291>] sys_write+0x51/0x90 [ 193.383573] [<ffffffff81606bdf>] sysenter_dispatch+0x7/0x1a [ 193.389228] ---[ end trace d10f9ac01058d5da ]--- [ 193.393971] mpt2sas0: removing handle(0x0009), sas_addr(0x4433221100000000) [ 193.554031] sd 6:0:1:0: [sdc] Synchronizing SCSI cache [ 193.559199] sd 6:0:1:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 193.683925] ------------[ cut here ]------------ [ 193.688536] WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0xa4/0xb0() [ 193.699144] sysfs: can not remove 'bsg', no directory [ 193.704183] Modules linked in: w1_therm ds2482 wire msr cpuid e1000e bnx2x crc32c libcrc32c mdio ipv6 genrtc [ 193.714269] Pid: 15020, comm: bash Tainted: G W 3.3.0-smp-DEV #11 [ 193.721209] Call Trace: [ 193.723665] [<ffffffff8108de33>] warn_slowpath_common+0x83/0x120 [ 193.729753] [<ffffffff8108df86>] warn_slowpath_fmt+0x46/0x60 [ 193.735487] [<ffffffff81225d24>] sysfs_hash_and_remove+0xa4/0xb0 [ 193.741573] [<ffffffff81229eb6>] sysfs_remove_link+0x26/0x30 [ 193.747313] [<ffffffff8131041c>] bsg_unregister_queue+0xbc/0x100 [ 193.753393] [<ffffffff8143cb08>] sas_rphy_free+0xa8/0xe0 [ 193.758780] [<ffffffff8143d9c5>] sas_port_delete+0x35/0x170 [ 193.764425] [<ffffffff81229eb6>] ? sysfs_remove_link+0x26/0x30 [ 193.770348] [<ffffffff8146342a>] mpt2sas_transport_port_remove+0x15a/0x200 [ 193.777299] [<ffffffff8145bbdb>] _scsih_remove_device+0xbb/0xc0 [ 193.783306] [<ffffffff815f86d9>] _scsih_remove+0x294/0x343 [ 193.788864] [<ffffffff813404d7>] pci_device_remove+0x37/0x70 [ 193.794595] [<ffffffff813f621b>] __device_release_driver+0x7b/0xe0 [ 193.800853] [<ffffffff813f636d>] device_release_driver+0x2d/0x40 [ 193.806933] [<ffffffff813f5521>] driver_unbind+0xc1/0xe0 [ 193.812334] [<ffffffff813f473c>] drv_attr_store+0x2c/0x30 [ 193.817824] [<ffffffff812269b2>] sysfs_write_file+0xe2/0x170 [ 193.823558] [<ffffffff811ac0d8>] vfs_write+0xc8/0x190 [ 193.828684] [<ffffffff811ac291>] sys_write+0x51/0x90 [ 193.833733] [<ffffffff81606bdf>] sysenter_dispatch+0x7/0x1a [ 193.839381] ---[ end trace d10f9ac01058d5db ]--- [ 193.844158] mpt2sas0: removing handle(0x000a), sas_addr(0x4433221104000000) [ 193.851639] mpt2sas0: sending message unit reset !! [ 193.858290] mpt2sas0: message unit reset: SUCCESS [ 194.234126] ------------[ cut here ]------------ [ 194.238736] WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0xa4/0xb0() [ 194.249335] sysfs: can not remove 'bsg', no directory [ 194.254375] Modules linked in: w1_therm ds2482 wire msr cpuid e1000e bnx2x crc32c libcrc32c mdio ipv6 genrtc [ 194.264441] Pid: 15020, comm: bash Tainted: G W 3.3.0-smp-DEV #11 [ 194.271401] Call Trace: [ 194.273849] [<ffffffff8108de33>] warn_slowpath_common+0x83/0x120 [ 194.279926] [<ffffffff8108df86>] warn_slowpath_fmt+0x46/0x60 [ 194.285658] [<ffffffff813fac00>] ? transport_add_device+0x20/0x20 [ 194.291831] [<ffffffff81225d24>] sysfs_hash_and_remove+0xa4/0xb0 [ 194.297909] [<ffffffff813fac00>] ? transport_add_device+0x20/0x20 [ 194.304074] [<ffffffff81229eb6>] sysfs_remove_link+0x26/0x30 [ 194.309806] [<ffffffff8131041c>] bsg_unregister_queue+0xbc/0x100 [ 194.315883] [<ffffffff8143c378>] sas_host_remove+0x48/0x60 [ 194.321442] [<ffffffff813fac31>] transport_remove_classdev+0x31/0x70 [ 194.327869] [<ffffffff813fa4b0>] attribute_container_device_trigger+0xa0/0xe0 [ 194.335069] [<ffffffff813fabb5>] transport_remove_device+0x15/0x20 [ 194.341321] [<ffffffff8142a69f>] scsi_remove_host+0xaf/0x120 [ 194.347055] [<ffffffff815f8771>] _scsih_remove+0x32c/0x343 [ 194.352612] [<ffffffff813404d7>] pci_device_remove+0x37/0x70 [ 194.358345] [<ffffffff813f621b>] __device_release_driver+0x7b/0xe0 [ 194.364602] [<ffffffff813f636d>] device_release_driver+0x2d/0x40 [ 194.370688] [<ffffffff813f5521>] driver_unbind+0xc1/0xe0 [ 194.376084] [<ffffffff813f473c>] drv_attr_store+0x2c/0x30 [ 194.381557] [<ffffffff812269b2>] sysfs_write_file+0xe2/0x170 [ 194.387289] [<ffffffff811ac0d8>] vfs_write+0xc8/0x190 [ 194.392417] [<ffffffff811ac291>] sys_write+0x51/0x90 [ 194.397467] [<ffffffff81606bdf>] sysenter_dispatch+0x7/0x1a [ 194.403121] ---[ end trace d10f9ac01058d5dc ]--- -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
