From: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
In case of FW hung ISP82xx generates continuous pause frames
which causes switch to disable port.
Added fix to disable generating pause frames in case of
FW hung
Signed-off-by: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_mbx.c | 7 +++++++
drivers/scsi/qla4xxx/ql4_nx.h | 3 +++
drivers/scsi/qla4xxx/ql4_os.c | 10 ++++++++++
3 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c259378..e1e66a4 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -219,6 +219,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
ha->mailbox_timeout_count++;
mbx_sts[0] = (-1);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ if (is_qla8022(ha)) {
+ ql4_printk(KERN_INFO, ha,
+ "disabling pause transmit on port 0 & 1.\n");
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ }
goto mbox_exit;
}
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index cfb2f2e..dc45ac9 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -39,6 +39,9 @@ enum {
QLA82XX_TEMP_PANIC /* Fatal error, hardware has shut down. */
};
+#define CRB_NIU_XG_PAUSE_CTL_P0 0x1
+#define CRB_NIU_XG_PAUSE_CTL_P1 0x8
+
#define QLA82XX_HW_H0_CH_HUB_ADR 0x05
#define QLA82XX_HW_H1_CH_HUB_ADR 0x0E
#define QLA82XX_HW_H2_CH_HUB_ADR 0x03
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d816229..f47a337 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -2080,6 +2080,11 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
if (qla4_8xxx_check_temp(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause"
+ " transmit on port 0 & 1.\n");
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
} else if (dev_state == QLA82XX_DEV_NEED_RESET &&
@@ -2099,6 +2104,11 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
} else {
/* Check firmware health */
if (qla4_8xxx_check_fw_alive(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause"
+ " transmit on port 0 & 1.\n");
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
halt_status = qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
--
1.7.8.rc2.3.g0911
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
