Re: [PATCH] firmware/isci: update to oem parameter format v1.3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2012-01-04 at 01:25 -0800, Dan Williams wrote:
> v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking)
> settings for SAS and SATA.  See notes in probe_roms.h
> 
> v1.3 allows the attenuation of the attached cables to be specified to
> the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h).
> These settings (per phy) are retrieved from the platform oem-parameters
> (BIOS rom), the fallback firmware blob, or via a module parameter
> override.
[...]

Applied, thanks.

Ben.

-- 
Ben Hutchings
Make three consecutive correct guesses and you will be considered an expert.

Attachment: signature.asc
Description: This is a digitally signed message part


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux