Praveen,
Thank you for your response.
This is Sparc server and here is silo, not grub. So I do not know how
well I tried your suggestions.
root@fire:/boot# ls -l
total 28506
lrwxrwxrwx 1 root root 1 Nov 5 08:28 boot -> .
-rw-r--r-- 1 root root 88515 Nov 14 16:35 config-3.1.0-1-sparc64
-rw-r--r-- 1 root root 88956 Nov 14 16:47 config-3.1.0-1-sparc64-smp
lrwxrwxrwx 1 root root 1 Nov 5 08:28 etc -> .
-rw-r--r-- 1 root root 1024 Aug 26 2010 fd.b
-rw-r--r-- 1 root root 512 Aug 26 2010 first.b
-rw-r--r-- 1 root root 1024 Aug 26 2010 generic.b
-rw-r--r-- 1 root root 692 Aug 26 2010 ieee32.b
lrwxrwxrwx 1 root root 30 Nov 23 08:13 initrd.img ->
initrd.img-3.1.0-1-sparc64-smp
-rw-r--r-- 1 root root 10201990 Nov 23 08:05 initrd.img-3.1.0-1-sparc64
-rw-r--r-- 1 root root 10293974 Dec 12 10:34 initrd.img-3.1.0-1-sparc64-smp
lrwxrwxrwx 1 root root 26 Nov 23 08:04 initrd.img.old ->
initrd.img-3.1.0-1-sparc64
-rw-r--r-- 1 root root 7704 Aug 26 2010 isofs.b
drwxr-xr-x 2 root root 12288 Nov 5 08:22 lost+found
-rw-r--r-- 1 root root 7680 Nov 5 08:28 old.b
-rw-r--r-- 1 root root 78336 Nov 5 08:28 second.b
-rw-r--r-- 1 root root 199 Dec 14 08:36 silo.conf
-rw-r--r-- 1 root root 76387 Aug 26 2010 silotftp.b
-rw-r--r-- 1 root root 1629480 Nov 14 16:35 System.map-3.1.0-1-sparc64
-rw-r--r-- 1 root root 1676706 Nov 14 16:47 System.map-3.1.0-1-sparc64-smp
-rw-r--r-- 1 root root 512 Aug 26 2010 ultra.b
lrwxrwxrwx 1 root root 27 Nov 23 08:13 vmlinuz ->
vmlinuz-3.1.0-1-sparc64-smp
-rw-r--r-- 1 root root 2385979 Nov 14 16:34 vmlinuz-3.1.0-1-sparc64
-rw-r--r-- 1 root root 2504212 Nov 14 16:46 vmlinuz-3.1.0-1-sparc64-smp
lrwxrwxrwx 1 root root 23 Nov 23 08:04 vmlinuz.old ->
vmlinuz-3.1.0-1-sparc64
I tried:
root@fire:/boot# cat silo.conf
root=/dev/sda2
partition=1
default=LinuxOLD
read-only
timeout=100
image=/vmlinuz
label=Linux
initrd=/initrd.img
append="pci=routeirq"
image=/vmlinuz.old
label=LinuxOLD
initrd=/initrd.img.old
and
root@fire:/boot# cat silo.conf
root=/dev/sda2
partition=1
default=LinuxOLD
read-only
timeout=100
image=/vmlinuz
label=Linux
initrd=/initrd.img
append="irqpoll"
image=/vmlinuz.old
label=LinuxOLD
initrd=/initrd.img.old
These changes have not helped. I have the same error messages.
Unfortunately I can't collect the kernel messages with smp linux-image.
I set in rsyslog.conf
kern.debug -/var/log/kern.debug
I had already set
*.=debug;\
auth,authpriv.none;\
news.none;mail.none -/var/log/debug
but there is no log messages from broken boot. I can collect messages
only from putty.
Regards,
Mariusz
PS. Sorry for my English. :)
W dniu 2011-12-13 19:36, Krishnamoorthy, Praveen pisze:
Mariusz,
[ 68.319518] mptbase: ioc0: WARNING - Issuing Reset from
mpt_config!!, doorbell=0x24000000
[ 69.175505] mptbase: ioc0: Attempting Retry Config request type
0x3, page 0x, action 0
[ 84.267524] mptbase: ioc0: WARNING - Issuing Reset from
mpt_config!!, doorbell=0x24000000
As Nagalakshmi pointed out, the series of reset happens because the config request for reading the page header fails. This is the first time the message queues are used when the card is coming up, therefore taking into account, that the same driver and same card works perfectly on non-smp linux kernel, I am guessing that the config request would have been sent successfully and the firmware would have processed the request and raised an interrupt through the IRQ line assigned for this card, it is somehow not routed to our driver's interrupt service routine. Therefore could you try the following to check if any of it works?
1. add pci=routeirq to the kernel boot parameters in /boot/grub/menu.lst
Eg)
title Debian XYZ
root (hdX,X)
kernel /boot/vmlinuz-XYZ root=XX ro quiet splash pci=routeirq
initrd /boot/initrd.img-XYZ
2. add irqpoll to the kernel boot parameters in /boot/grub/menu.lst
Eg)
title Debian XYZ
root (hdX,X)
kernel /boot/vmlinuz-XYZ root=XX ro quiet splash irqpoll
initrd /boot/initrd.img-XYZ
Regards,
Praveen
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
