> -----Original Message----- > From: linux-scsi-owner@xxxxxxxxxxxxxxx [mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of Meelis > Roos > Sent: Tuesday, December 13, 2011 7:04 AM > To: Linux Kernel list; linux-scsi@xxxxxxxxxxxxxxx > Subject: Re: 3.2-rc2+git: kernel BUG at block/blk-core.c:1000! (__scsi_queue_insert) > > Any hope of somebody looking into it? It's still present and > reproducible in 3.2-rc5. > > > Hello, > > > > While trying 3.2.0-rc2-00143-ga767835 on Sun Ultra 10 (sparc64) with > > Adaptec SCSI controller, I can consistently get the below BUG shortly > > after bootup. Another machine, Sun Ultra 5 with IDE disk, works fine > > (config might also differ in other details than ide/scsi). ... > > kernel BUG at block/blk-core.c:1000! > > \|/ ____ \|/ > > "@'/ .. \`@" > > /_| \__/ |_\ > > \__U_/ > > swapper(0): Kernel bad sw trap 5 [#1] > > TSTATE: 0000008080e01602 TPC: 00000000005c3380 TNPC: 00000000005c3384 Y: 00000000 Not tainted > > TPC: <blk_requeue_request+0x60/0x80> > > g0: 0000000000000003 g1: 0000000000872000 g2: 0000000000000001 g3: ffffffffffffffd8 > > g4: 0000000000869b50 g5: f7ddef20f7767b60 g6: 0000000000860000 g7: 0000000000001000 > > o0: 0000000000000028 o1: 0000000000816440 o2: 00000000000003e8 o3: 00000000ffffa86e > > o4: fffff8001f00cb60 o5: 0000000000816440 sp: fffff8001fefb471 ret_pc: 00000000005c3378 > > RPC: <blk_requeue_request+0x58/0x80> > > l0: 00000000fffc00f0 l1: 0000000000883790 l2: 0000000000000001 l3: fffff8001f0060c0 > > l4: fffff8001f0020c0 l5: 0000000000000000 l6: 00000000008a2e18 l7: fffffffffffffff8 > > i0: fffff8001f2d3100 i1: fffff8001f329a20 i2: 000000000091d56c i3: 000000000091d400 > > i4: 0000000000000001 i5: 0000000000000000 i6: fffff8001fefb521 i7: 000000000065dc10 > > I7: <__scsi_queue_insert+0xb0/0x100> > > Call Trace: > > [000000000065dc10] __scsi_queue_insert+0xb0/0x100 > > [00000000005c812c] blk_done_softirq+0x6c/0xa0 > > [000000000045a530] __do_softirq+0x90/0x120 > > [000000000042b054] do_softirq+0x74/0xa0 > > [000000000045a82c] irq_exit+0x8c/0xa0 > > [000000000042af9c] handler_irq+0x9c/0xe0 > > [00000000004208b4] tl0_irq5+0x14/0x20 > > [0000000000439484] touch_nmi_watchdog+0x4/0x40 > > [00000000008a8788] start_kernel+0x318/0x328 > > [000000000074af88] tlb_fixup_done+0x80/0x88 > > [0000000000000000] (null) I see similar to this using 3.2.0-rc5+ on x86_64 with one SAS drive on an Intel C600. It hits every time I run mkfs. Stack shown below. Running 'git bisect' leads to this: commit b4fdcb02f1e39c27058a885905bd0277370ba441 Merge: 044595d 6dd9ad7 Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Fri Nov 4 17:06:58 2011 -0700 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block I see the failure with git reset --hard b4fdcb0, but it does not occur with git reset --hard 6dd9ad7 or git reset --hard 044595d. Any thoughts on what I can try next? Thanks, Ed [root@scutest0 ~]# mkfs -t ext3 /dev/sdb1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 8978432 inodes, 35909283 blocks 1795464 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 1096 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: [ 122.752553] ------------[ cut here ]------------ [ 122.757713] kernel BUG at block/blk-core.c:1000! [ 122.762863] invalid opcode: 0000 [#1] SMP [ 122.767465] CPU 8 [ 122.769518] Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf ipv6 uinput iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca isci libsas scsi_transport_sas [last unloaded: scsi_wait_scan] [ 122.790910] [ 122.792578] Pid: 0, comm: swapper/8 Not tainted 3.2.0-rc5+ #2 Intel Corporation S2600CP/S2600CP [ 122.802322] RIP: 0010:[<ffffffff81267e81>] [<ffffffff81267e81>] blk_requeue_request+0x6b/0x82 [ 122.811962] RSP: 0018:ffff88083fa03dd0 EFLAGS: 00010006 [ 122.817885] RAX: 0000000000000000 RBX: ffff880766890b00 RCX: ffff88083fa03dc0 [ 122.825844] RDX: ffff8808205c2bd0 RSI: ffff880766890b00 RDI: ffff880422f694c0 [ 122.833810] RBP: ffff88083fa03df0 R08: ffff880766890c30 R09: 0000000000000001 [ 122.841769] R10: 0000000000000000 R11: ffff880422f69b20 R12: ffff880823217000 [ 122.849735] R13: ffff880422f694c0 R14: ffff880422f694c0 R15: ffff880423a5f000 [ 122.857695] FS: 0000000000000000(0000) GS:ffff88083fa00000(0000) knlGS:0000000000000000 [ 122.866719] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 122.873128] CR2: 00000000008a9000 CR3: 000000081818c000 CR4: 00000000000406e0 [ 122.881101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 122.889061] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 122.897021] Process swapper/8 (pid: 0, threadinfo ffff880425fbc000, task ffff880425fb5f40) [ 122.906247] Stack: [ 122.908489] ffffffff813547e0 0000000000000282 ffff880823217000 ffff880423a5e000 [ 122.916792] ffff88083fa03e40 ffffffff813547f3 ffff88083fa03e30 ffff880423432028 [ 122.925087] ffff880766978d80 ffff880823217000 0000000000002006 0000000000007530 [ 122.933383] Call Trace: [ 122.936122] <IRQ> [ 122.938484] [<ffffffff813547e0>] ? __scsi_queue_insert+0xc9/0x10b [ 122.945386] [<ffffffff813547f3>] __scsi_queue_insert+0xdc/0x10b [ 122.952086] [<ffffffff81354cce>] scsi_queue_insert+0x13/0x15 [ 122.958495] [<ffffffff81354db7>] scsi_softirq_done+0xe7/0x108 [ 122.965018] [<ffffffff8126d5b4>] blk_done_softirq+0x84/0x98 [ 122.971340] [<ffffffff810566c5>] __do_softirq+0xe3/0x1d5 [ 122.977392] [<ffffffff81511c67>] ? _raw_spin_lock+0x39/0x40 [ 122.983713] [<ffffffff810b36e2>] ? handle_irq_event+0x4f/0x65 [ 122.990230] [<ffffffff8151b3fc>] call_softirq+0x1c/0x30 [ 122.996167] [<ffffffff81010b5f>] do_softirq+0x4b/0xa3 [ 123.001888] [<ffffffff810563e5>] irq_exit+0x53/0xca [ 123.007433] [<ffffffff8151bd0d>] do_IRQ+0x9d/0xb4 [ 123.012790] [<ffffffff815125b3>] common_interrupt+0x73/0x73 [ 123.019101] <EOI> [ 123.021467] [<ffffffff8107bc7f>] ? tick_nohz_stop_sched_tick+0x31c/0x361 [ 123.029057] [<ffffffff810169d7>] ? mwait_idle+0xa1/0xde [ 123.034981] [<ffffffff810169ce>] ? mwait_idle+0x98/0xde [ 123.040905] [<ffffffff8100ee58>] cpu_idle+0xca/0x108 [ 123.046550] [<ffffffff81509796>] start_secondary+0x255/0x257 [ 123.052960] Code: 48 89 da 4c 89 ee 41 ff 14 24 49 83 c4 10 49 83 3c 24 00 eb e4 f6 43 42 08 74 0b 48 89 de 4c 89 ef e8 35 20 00 00 48 39 1b 74 04 <0f> 0b eb fe 48 89 de 4c 89 ef e8 1b bb ff ff 5e 5b 41 5c 41 5d [ 123.074691] RIP [<ffffffff81267e81>] blk_requeue_request+0x6b/0x82 [ 123.081700] RSP <ffff88083fa03dd0> [ 123.085598] ---[ end trace ebaf24a04fa3b80a ]--- [ 123.090747] Kernel panic - not syncing: Fatal exception in interrupt [ 123.097833] Pid: 0, comm: swapper/8 Tainted: G D 3.2.0-rc5+ #2 [ 123.105309] Call Trace: [ 123.108034] <IRQ> [<ffffffff8150f58b>] panic+0x91/0x1b2 [ 123.114079] [<ffffffff81513332>] oops_end+0xb7/0xc7 [ 123.119616] [<ffffffff81011b5e>] die+0x5a/0x63 [ 123.124670] [<ffffffff81512ff0>] do_trap+0x121/0x130 [ 123.130305] [<ffffffff8100ffcb>] do_invalid_op+0x94/0x9d [ 123.136327] [<ffffffff81267e81>] ? blk_requeue_request+0x6b/0x82 [ 123.143141] [<ffffffff81284a3d>] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 123.150423] [<ffffffff815126a4>] ? restore_args+0x30/0x30 [ 123.156555] [<ffffffff8151b17b>] invalid_op+0x1b/0x20 [ 123.162286] [<ffffffff81267e81>] ? blk_requeue_request+0x6b/0x82 [ 123.169084] [<ffffffff813547e0>] ? __scsi_queue_insert+0xc9/0x10b [ 123.175979] [<ffffffff813547f3>] __scsi_queue_insert+0xdc/0x10b [ 123.182681] [<ffffffff81354cce>] scsi_queue_insert+0x13/0x15 [ 123.189092] [<ffffffff81354db7>] scsi_softirq_done+0xe7/0x108 [ 123.195598] [<ffffffff8126d5b4>] blk_done_softirq+0x84/0x98 [ 123.201911] [<ffffffff810566c5>] __do_softirq+0xe3/0x1d5 [ 123.207932] [<ffffffff81511c67>] ? _raw_spin_lock+0x39/0x40 [ 123.214244] [<ffffffff810b36e2>] ? handle_irq_event+0x4f/0x65 [ 123.220758] [<ffffffff8151b3fc>] call_softirq+0x1c/0x30 [ 123.226691] [<ffffffff81010b5f>] do_softirq+0x4b/0xa3 [ 123.232422] [<ffffffff810563e5>] irq_exit+0x53/0xca [ 123.237958] [<ffffffff8151bd0d>] do_IRQ+0x9d/0xb4 [ 123.243303] [<ffffffff815125b3>] common_interrupt+0x73/0x73 [ 123.249621] <EOI> [<ffffffff8107bc7f>] ? tick_nohz_stop_sched_tick+0x31c/0x361 [ 123.257883] [<ffffffff810169d7>] ? mwait_idle+0xa1/0xde [ 123.263808] [<ffffffff810169ce>] ? mwait_idle+0x98/0xde [ 123.269741] [<ffffffff8100ee58>] cpu_idle+0xca/0x108 [ 123.275376] [<ffffffff81509796>] start_secondary+0x255/0x257 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
