Add support for ABTS failure handling:
- Add asynchronous ABTS notification event feature to driver (CR 124578)
- Change driver message 3092 and 3116 to KERN_WARNING (CR 124768)
- Alter the SCR ELS command to use the temporary RPI and the
Destination DID for SLI4-FC (CR 126070)
Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc_crtn.h | 4 -
lpfc_els.c | 50 -------------
lpfc_hbadisc.c | 67 +++++++++++++++++
lpfc_hw.h | 13 ++-
lpfc_mbox.c | 4 +
lpfc_scsi.c | 4 -
lpfc_sli.c | 214 +++++++++++++++++++++++++++++++++++++++++++++++----------
7 files changed, 263 insertions(+), 93 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
--- a/drivers/scsi/lpfc/lpfc_crtn.h 2011-12-12 20:50:38.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_crtn.h 2011-12-12 20:51:18.000000000 -0500
@@ -106,7 +106,7 @@ void lpfc_cleanup(struct lpfc_vport *);
void lpfc_disc_timeout(unsigned long);
struct lpfc_nodelist *__lpfc_findnode_rpi(struct lpfc_vport *, uint16_t);
-
+struct lpfc_nodelist * lpfc_findnode_rpi(struct lpfc_vport *, uint16_t);
void lpfc_worker_wake_up(struct lpfc_hba *);
int lpfc_workq_post_event(struct lpfc_hba *, void *, void *, uint32_t);
int lpfc_do_work(void *);
@@ -455,3 +455,5 @@ int lpfc_sli4_queue_create(struct lpfc_h
void lpfc_sli4_queue_destroy(struct lpfc_hba *);
int lpfc_sli4_read_config(struct lpfc_hba *phba);
int lpfc_scsi_buf_update(struct lpfc_hba *phba);
+void lpfc_sli4_abts_err_handler(struct lpfc_hba *, struct lpfc_nodelist *,
+ struct sli4_wcqe_xri_aborted *);
diff -upNr a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
--- a/drivers/scsi/lpfc/lpfc_els.c 2011-12-12 20:50:38.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_els.c 2011-12-12 20:51:18.000000000 -0500
@@ -6596,56 +6596,6 @@ dropit:
}
/**
- * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
- * @phba: pointer to lpfc hba data structure.
- * @vpi: host virtual N_Port identifier.
- *
- * This routine finds a vport on a HBA (referred by @phba) through a
- * @vpi. The function walks the HBA's vport list and returns the address
- * of the vport with the matching @vpi.
- *
- * Return code
- * NULL - No vport with the matching @vpi found
- * Otherwise - Address to the vport with the matching @vpi.
- **/
-struct lpfc_vport *
-lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
-{
- struct lpfc_vport *vport;
- unsigned long flags;
- int i = 0;
-
- /* The physical ports are always vpi 0 - translate is unnecessary. */
- if (vpi > 0) {
- /*
- * Translate the physical vpi to the logical vpi. The
- * vport stores the logical vpi.
- */
- for (i = 0; i < phba->max_vpi; i++) {
- if (vpi == phba->vpi_ids[i])
- break;
- }
-
- if (i >= phba->max_vpi) {
- lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
- "2936 Could not find Vport mapped "
- "to vpi %d\n", vpi);
- return NULL;
- }
- }
-
- spin_lock_irqsave(&phba->hbalock, flags);
- list_for_each_entry(vport, &phba->port_list, listentry) {
- if (vport->vpi == i) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
- return vport;
- }
- }
- spin_unlock_irqrestore(&phba->hbalock, flags);
- return NULL;
-}
-
-/**
* lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
diff -upNr a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c 2011-12-12 20:50:38.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c 2011-12-12 20:51:18.000000000 -0500
@@ -5352,6 +5352,73 @@ lpfc_findnode_wwpn(struct lpfc_vport *vp
return ndlp;
}
+/*
+ * This routine looks up the ndlp lists for the given RPI. If the rpi
+ * is found, the routine returns the node element list pointer else
+ * return NULL.
+ */
+struct lpfc_nodelist *
+lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
+{
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_nodelist *ndlp;
+
+ spin_lock_irq(shost->host_lock);
+ ndlp = __lpfc_findnode_rpi(vport, rpi);
+ spin_unlock_irq(shost->host_lock);
+ return ndlp;
+}
+
+/**
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: the physical host virtual N_Port identifier.
+ *
+ * This routine finds a vport on a HBA (referred by @phba) through a
+ * @vpi. The function walks the HBA's vport list and returns the address
+ * of the vport with the matching @vpi.
+ *
+ * Return code
+ * NULL - No vport with the matching @vpi found
+ * Otherwise - Address to the vport with the matching @vpi.
+ **/
+struct lpfc_vport *
+lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
+{
+ struct lpfc_vport *vport;
+ unsigned long flags;
+ int i = 0;
+
+ /* The physical ports are always vpi 0 - translate is unnecessary. */
+ if (vpi > 0) {
+ /*
+ * Translate the physical vpi to the logical vpi. The
+ * vport stores the logical vpi.
+ */
+ for (i = 0; i < phba->max_vpi; i++) {
+ if (vpi == phba->vpi_ids[i])
+ break;
+ }
+
+ if (i >= phba->max_vpi) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
+ "2936 Could not find Vport mapped "
+ "to vpi %d\n", vpi);
+ return NULL;
+ }
+ }
+
+ spin_lock_irqsave(&phba->hbalock, flags);
+ list_for_each_entry(vport, &phba->port_list, listentry) {
+ if (vport->vpi == i) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return vport;
+ }
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return NULL;
+}
+
void
lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint32_t did)
diff -upNr a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
--- a/drivers/scsi/lpfc/lpfc_hw.h 2011-08-10 14:34:51.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_hw.h 2011-12-12 20:51:18.000000000 -0500
@@ -2819,7 +2819,8 @@ typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t rsvd1 : 19; /* Reserved */
uint32_t cdss : 1; /* Configure Data Security SLI */
- uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t casabt : 1; /* Configure async abts status notice */
+ uint32_t rsvd2 : 2; /* Reserved */
uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
@@ -2839,14 +2840,16 @@ typedef struct {
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t cbg : 1; /* Configure BlockGuard */
- uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t rsvd2 : 2; /* Reserved */
+ uint32_t casabt : 1; /* Configure async abts status notice */
uint32_t cdss : 1; /* Configure Data Security SLI */
uint32_t rsvd1 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t rsvd3 : 19; /* Reserved */
uint32_t gdss : 1; /* Configure Data Security SLI */
- uint32_t rsvd4 : 3; /* Reserved */
+ uint32_t gasabt : 1; /* Grant async abts status notice */
+ uint32_t rsvd4 : 2; /* Reserved */
uint32_t gbg : 1; /* Grant BlockGuard */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gcrp : 1; /* Grant Command Ring Polling */
@@ -2866,7 +2869,8 @@ typedef struct {
uint32_t gcrp : 1; /* Grant Command Ring Polling */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gbg : 1; /* Grant BlockGuard */
- uint32_t rsvd4 : 3; /* Reserved */
+ uint32_t rsvd4 : 2; /* Reserved */
+ uint32_t gasabt : 1; /* Grant async abts status notice */
uint32_t gdss : 1; /* Configure Data Security SLI */
uint32_t rsvd3 : 19; /* Reserved */
#endif
@@ -3465,6 +3469,7 @@ typedef struct {
} ASYNCSTAT_FIELDS;
#define ASYNC_TEMP_WARN 0x100
#define ASYNC_TEMP_SAFE 0x101
+#define ASYNC_STATUS_CN 0x102
/* IOCB Command template for CMD_IOCB_RCV_ELS64_CX (0xB7)
or CMD_IOCB_RCV_SEQ64_CX (0xB5) */
diff -upNr a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
--- a/drivers/scsi/lpfc/lpfc_mbox.c 2011-12-12 20:49:51.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_mbox.c 2011-12-12 20:51:18.000000000 -0500
@@ -1293,6 +1293,10 @@ lpfc_config_port(struct lpfc_hba *phba,
phba->sli_rev = LPFC_SLI_REV2;
mb->un.varCfgPort.sli_mode = phba->sli_rev;
+ /* If this is an SLI3 port, configure async status notification. */
+ if (phba->sli_rev == LPFC_SLI_REV3)
+ mb->un.varCfgPort.casabt = 1;
+
/* Now setup pcb */
phba->pcb->type = TYPE_NATIVE_SLI2;
phba->pcb->feature = FEATURE_INITIAL_SLI2;
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2011-12-12 20:25:00.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2011-12-12 20:51:18.000000000 -0500
@@ -681,8 +681,10 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hb
rrq_empty = list_empty(&phba->active_rrq_list);
spin_unlock_irqrestore(&phba->hbalock, iflag);
- if (ndlp)
+ if (ndlp) {
lpfc_set_rrq_active(phba, ndlp, xri, rxid, 1);
+ lpfc_sli4_abts_err_handler(phba, ndlp, axri);
+ }
lpfc_release_scsi_buf_s4(phba, psb);
if (rrq_empty)
lpfc_worker_wake_up(phba);
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2011-12-12 20:50:38.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2011-12-12 20:51:18.000000000 -0500
@@ -4339,6 +4339,11 @@ lpfc_sli_config_port(struct lpfc_hba *ph
phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
spin_unlock_irq(&phba->hbalock);
done = 1;
+
+ if ((pmb->u.mb.un.varCfgPort.casabt == 1) &&
+ (pmb->u.mb.un.varCfgPort.gasabt == 0))
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "3110 Port did not grant ASABT\n");
}
}
if (!done) {
@@ -7704,6 +7709,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
iocbq->context2)->virt);
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
+ *pcmd == ELS_CMD_SCR ||
*pcmd == ELS_CMD_PLOGI)) {
bf_set(els_req64_sp, &wqe->els_req, 1);
bf_set(els_req64_sid, &wqe->els_req,
@@ -8213,6 +8219,137 @@ lpfc_extra_ring_setup( struct lpfc_hba *
return 0;
}
+/* lpfc_sli_abts_recover_port - Recover a port that failed an ABTS.
+ * @vport: pointer to virtual port object.
+ * @ndlp: nodelist pointer for the impacted rport.
+ *
+ * The driver calls this routine in response to a XRI ABORT CQE
+ * event from the port. In this event, the driver is required to
+ * recover its login to the rport even though its login may be valid
+ * from the driver's perspective. The failed ABTS notice from the
+ * port indicates the rport is not responding.
+ */
+static void
+lpfc_sli_abts_recover_port(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_hba *phba;
+ unsigned long flags = 0;
+
+ shost = lpfc_shost_from_vport(vport);
+ phba = vport->phba;
+ if (ndlp->nlp_state != NLP_STE_MAPPED_NODE) {
+ lpfc_printf_log(phba, KERN_INFO,
+ LOG_SLI, "3093 No rport recovery needed. "
+ "rport in state 0x%x\n",
+ ndlp->nlp_state);
+ return;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3094 Start rport recovery on shost id 0x%x "
+ "fc_id 0x%06x vpi 0x%x rpi 0x%x state 0x%x "
+ "flags 0x%x\n",
+ shost->host_no, ndlp->nlp_DID,
+ vport->vpi, ndlp->nlp_rpi, ndlp->nlp_state,
+ ndlp->nlp_flag);
+ /*
+ * The rport is not responding. Don't attempt ADISC recovery.
+ * Remove the FCP-2 flag to force a PLOGI.
+ */
+ spin_lock_irqsave(shost->host_lock, flags);
+ ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ lpfc_disc_state_machine(vport, ndlp, NULL,
+ NLP_EVT_DEVICE_RECOVERY);
+ lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irqsave(shost->host_lock, flags);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ lpfc_disc_start(vport);
+}
+
+/* lpfc_sli_abts_err_handler - handle a failed ABTS request from an SLI3 port.
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to iocb object.
+ *
+ * The async_event handler calls this routine when it receives
+ * an ASYNC_STATUS_CN event from the port. The port generates
+ * this event when an Abort Sequence request to an rport fails
+ * twice in succession. The abort could be originated by the
+ * driver or by the port. The ABTS could have been for an ELS
+ * or FCP IO. The port only generates this event when an ABTS
+ * fails to complete after one retry.
+ */
+static void
+lpfc_sli_abts_err_handler(struct lpfc_hba *phba,
+ struct lpfc_iocbq *iocbq)
+{
+ struct lpfc_nodelist *ndlp = NULL;
+ uint16_t rpi = 0, vpi = 0;
+ struct lpfc_vport *vport = NULL;
+
+ /* The rpi in the ulpContext is vport-sensitive. */
+ vpi = iocbq->iocb.un.asyncstat.sub_ctxt_tag;
+ rpi = iocbq->iocb.ulpContext;
+
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3092 Port generated ABTS async event "
+ "on vpi %d rpi %d status 0x%x\n",
+ vpi, rpi, iocbq->iocb.ulpStatus);
+
+ vport = lpfc_find_vport_by_vpid(phba, vpi);
+ if (!vport)
+ goto err_exit;
+ ndlp = lpfc_findnode_rpi(vport, rpi);
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ goto err_exit;
+
+ if (iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+ lpfc_sli_abts_recover_port(vport, ndlp);
+ return;
+
+ err_exit:
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3095 Event Context not found, no "
+ "action on vpi %d rpi %d status 0x%x, reason 0x%x\n",
+ iocbq->iocb.ulpContext, iocbq->iocb.ulpStatus,
+ vpi, rpi);
+}
+
+/* lpfc_sli4_abts_err_handler - handle a failed ABTS request from an SLI4 port.
+ * @phba: pointer to HBA context object.
+ * @ndlp: nodelist pointer for the impacted rport.
+ * @axri: pointer to the wcqe containing the failed exchange.
+ *
+ * The driver calls this routine when it receives an ABORT_XRI_FCP CQE from the
+ * port. The port generates this event when an abort exchange request to an
+ * rport fails twice in succession with no reply. The abort could be originated
+ * by the driver or by the port. The ABTS could have been for an ELS or FCP IO.
+ */
+void
+lpfc_sli4_abts_err_handler(struct lpfc_hba *phba,
+ struct lpfc_nodelist *ndlp,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ struct lpfc_vport *vport;
+
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3115 Node Context not found, driver "
+ "ignoring abts err event\n");
+ vport = ndlp->vport;
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3116 Port generated FCP XRI ABORT event on "
+ "vpi %d rpi %d xri x%x status 0x%x\n",
+ ndlp->vport->vpi, ndlp->nlp_rpi,
+ bf_get(lpfc_wcqe_xa_xri, axri),
+ bf_get(lpfc_wcqe_xa_status, axri));
+
+ if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT)
+ lpfc_sli_abts_recover_port(vport, ndlp);
+}
+
/**
* lpfc_sli_async_event_handler - ASYNC iocb handler function
* @phba: Pointer to HBA context object.
@@ -8232,63 +8369,58 @@ lpfc_sli_async_event_handler(struct lpfc
{
IOCB_t *icmd;
uint16_t evt_code;
- uint16_t temp;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
uint32_t *iocb_w;
icmd = &iocbq->iocb;
evt_code = icmd->un.asyncstat.evt_code;
- temp = icmd->ulpContext;
- if ((evt_code != ASYNC_TEMP_WARN) &&
- (evt_code != ASYNC_TEMP_SAFE)) {
+ switch (evt_code) {
+ case ASYNC_TEMP_WARN:
+ case ASYNC_TEMP_SAFE:
+ temp_event_data.data = (uint32_t) icmd->ulpContext;
+ temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+ if (evt_code == ASYNC_TEMP_WARN) {
+ temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
+ lpfc_printf_log(phba, KERN_ERR, LOG_TEMP,
+ "0347 Adapter is very hot, please take "
+ "corrective action. temperature : %d Celsius\n",
+ (uint32_t) icmd->ulpContext);
+ } else {
+ temp_event_data.event_code = LPFC_NORMAL_TEMP;
+ lpfc_printf_log(phba, KERN_ERR, LOG_TEMP,
+ "0340 Adapter temperature is OK now. "
+ "temperature : %d Celsius\n",
+ (uint32_t) icmd->ulpContext);
+ }
+
+ /* Send temperature change event to applications */
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(temp_event_data), (char *) &temp_event_data,
+ LPFC_NL_VENDOR_ID);
+ break;
+ case ASYNC_STATUS_CN:
+ lpfc_sli_abts_err_handler(phba, iocbq);
+ break;
+ default:
iocb_w = (uint32_t *) icmd;
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_SLI,
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0346 Ring %d handler: unexpected ASYNC_STATUS"
" evt_code 0x%x\n"
"W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n"
"W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n"
"W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
"W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
- pring->ringno,
- icmd->un.asyncstat.evt_code,
+ pring->ringno, icmd->un.asyncstat.evt_code,
iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
- return;
- }
- temp_event_data.data = (uint32_t)temp;
- temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
- if (evt_code == ASYNC_TEMP_WARN) {
- temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_TEMP,
- "0347 Adapter is very hot, please take "
- "corrective action. temperature : %d Celsius\n",
- temp);
- }
- if (evt_code == ASYNC_TEMP_SAFE) {
- temp_event_data.event_code = LPFC_NORMAL_TEMP;
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_TEMP,
- "0340 Adapter temperature is OK now. "
- "temperature : %d Celsius\n",
- temp);
+ break;
}
-
- /* Send temperature change event to applications */
- shost = lpfc_shost_from_vport(phba->pport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(temp_event_data), (char *) &temp_event_data,
- LPFC_NL_VENDOR_ID);
-
}
@@ -9247,6 +9379,14 @@ void
lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3096 ABORT_XRI_CN completing on xri x%x "
+ "original iotag x%x, abort cmd iotag x%x "
+ "status 0x%x, reason 0x%x\n",
+ cmdiocb->iocb.un.acxri.abortContextTag,
+ cmdiocb->iocb.un.acxri.abortIoTag,
+ cmdiocb->iotag, rspiocb->iocb.ulpStatus,
+ rspiocb->iocb.un.ulpWord[4]);
lpfc_sli_release_iocbq(phba, cmdiocb);
return;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
