Re: Is there any elegant way to re-identify and re-configure xfer mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Wed, Nov 2, 2011 at 11:03 PM, JiSheng Zhang <jszhang3@xxxxxxxxx> wrote:
> It cause link reset, the cdrom go back to Boot mode again :(

Umm... so the device goes to the 'basic' mode after reset and needs to
be put into another mode for proper operation? If the hardware is
designed that way, there really isn't much we can do about it.
Supporting that requires changes to basic identify procedure and I'm
strongly against such changes.

Good luck.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux