From: Andrzej Jakowski <andrzej.jakowski@xxxxxxxxx>
Fixes bug where max_concurr_spinup oem parameter should be
overriden by max_concurr_spinup user parameter. Override should
happen only when max_concurr_spinup user parameter is specified
in command line (greater than 0). Also this fix shortens variables
representing max_conxurr_spinup for oem and user parameters.
Signed-off-by: Andrzej Jakowski <andrzej.jakowski@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/scsi/isci/host.c | 23 ++++++++++++++++-------
drivers/scsi/isci/init.c | 2 +-
drivers/scsi/isci/probe_roms.h | 4 ++--
3 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index f07f30f..e7fe9c4 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1350,7 +1350,7 @@ static void isci_user_parameters_get(struct sci_user_parameters *u)
u->stp_max_occupancy_timeout = stp_max_occ_to;
u->ssp_max_occupancy_timeout = ssp_max_occ_to;
u->no_outbound_task_timeout = no_outbound_task_to;
- u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+ u->max_concurr_spinup = max_concurr_spinup;
}
static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
@@ -1661,7 +1661,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
/* Default to APC mode. */
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+ ihost->oem_parameters.controller.max_concurr_spin_up = 1;
/* Default to no SSC operation. */
ihost->oem_parameters.controller.do_enable_ssc = false;
@@ -1787,7 +1787,8 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
} else
return -EINVAL;
- if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+ oem->controller.max_concurr_spin_up < 1)
return -EINVAL;
return 0;
@@ -1810,6 +1811,16 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
return SCI_FAILURE_INVALID_STATE;
}
+static u8 max_spin_up(struct isci_host *ihost)
+{
+ if (ihost->user_parameters.max_concurr_spinup)
+ return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+ else
+ return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
static void power_control_timeout(unsigned long data)
{
struct sci_timer *tmr = (struct sci_timer *)data;
@@ -1839,8 +1850,7 @@ static void power_control_timeout(unsigned long data)
if (iphy == NULL)
continue;
- if (ihost->power_control.phys_granted_power >=
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+ if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
break;
ihost->power_control.requesters[i] = NULL;
@@ -1865,8 +1875,7 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
{
BUG_ON(iphy == NULL);
- if (ihost->power_control.phys_granted_power <
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+ if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
ihost->power_control.phys_granted_power++;
sci_phy_consume_power_handler(iphy);
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 43fe840..a97edab 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -118,7 +118,7 @@ unsigned char phy_gen = 3;
module_param(phy_gen, byte, 0);
MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
-unsigned char max_concurr_spinup = 1;
+unsigned char max_concurr_spinup;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index dc007e6..2c75248 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -112,7 +112,7 @@ struct sci_user_parameters {
* This field specifies the maximum number of direct attached devices
* that can have power supplied to them simultaneously.
*/
- u8 max_number_concurrent_device_spin_up;
+ u8 max_concurr_spinup;
/**
* This field specifies the number of seconds to allow a phy to consume
@@ -219,7 +219,7 @@ struct sci_bios_oem_param_block_hdr {
struct sci_oem_params {
struct {
uint8_t mode_type;
- uint8_t max_concurrent_dev_spin_up;
+ uint8_t max_concurr_spin_up;
uint8_t do_enable_ssc;
uint8_t reserved;
} controller;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
