Fix for issue Drives not getting properly deleted if sas cable is removed
while host reset is active.
The fix is in the driver-firmware handshake device removal code. We
need to read the controller ioc_state to see if controller is OPERATIONAL
prior to sending target reset and OP_REMOVE. Previously it was checking
the flag ioc->shost_recovery flag, which is always set when host reset is
active, thus preventing drives from getting properly deleted.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@xxxxxxx>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index deb9791..141f445 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3018,11 +3018,23 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
struct MPT2SAS_TARGET *sas_target_priv_data;
unsigned long flags;
struct _tr_list *delayed_tr;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
+ return;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
+ return;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
return;
}
@@ -3223,11 +3235,21 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
mpt2sas_base_get_reply_virt_addr(ioc, reply);
Mpi2SasIoUnitControlRequest_t *mpi_request;
u16 smid_sas_ctrl;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed\n", __func__, ioc->name));
+ return 1;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery\n", __func__, ioc->name));
+ return 1;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational\n", __func__, ioc->name));
return 1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
