Fix for issue : While discovery is in progress, hot unplug and hot plug of
enclosure connected to the controller card is causing system to hang.
When a device is in the process of being detected at driver load time then
if it is removed, the device that is no longer present will not be added
to the list. So the code in _scsih_probe_sas() is rearranged as such so
the devices that failed to be detected are not added to the list.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@xxxxxxx>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index bd9df3a..849fa84 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -7657,22 +7657,27 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
/* SAS Device List */
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
list) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_move_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (ioc->hide_drives)
continue;
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
} else if (!sas_device->starget) {
mpt2sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
+
}
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_move_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
