[PATCH] mpt2sas: MPI next revision header update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1)Added ProxyVF_ID field to Configuration Request message.
2)Added IO Unit Page 8, IO Unit Page 9,and IO Unit Page 10.
3)Added SASNotifyPrimitiveMasks field to IOC Page 7.
4)Added SAS NOTIFY Primitive event.
5)Added Temperature Threshold Event.
6)Added Host Message Event.
7)Added Send Host Message request and reply.


Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@xxxxxxx>
---
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 3105d5e..8dc1b32 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2.h
@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.18
+ *  mpi2.h Version:  02.00.20
  *
  *  Version History
  *  ---------------
@@ -66,6 +66,9 @@
  *  08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
  *  11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
  *                      Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ *  02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ *  03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -91,7 +94,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x12)
+#define MPI2_HEADER_VERSION_UNIT            (0x14)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
@@ -515,6 +518,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
 #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
 /* Power Management Control */
 #define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
+/* Send Host Message */
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
 /* beginning of product-specific range */
 #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
 /* end of product-specific range */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 61475a6..cfd95b4 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2_cnfg.h
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.17
+ *    mpi2_cnfg.h Version:  02.00.19
  *
  *  Version History
  *  ---------------
@@ -134,6 +134,12 @@
  *                      to MPI2_CONFIG_PAGE_IO_UNIT_7.
  *                      Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
  *                      and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ *  02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ *                      Added IO Unit Page 8, IO Unit Page 9,
+ *                      and IO Unit Page 10.
+ *                      Added SASNotifyPrimitiveMasks field to
+ *                      MPI2_CONFIG_PAGE_IOC_7.
+ *  03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
  *  --------------------------------------------------------------------------
  */
 
@@ -329,7 +335,9 @@ typedef struct _MPI2_CONFIG_REQUEST
     U8                      VP_ID;                      /* 0x08 */
     U8                      VF_ID;                      /* 0x09 */
     U16                     Reserved1;                  /* 0x0A */
-    U32                     Reserved2;                  /* 0x0C */
+	U8                      Reserved2;                  /* 0x0C */
+	U8                      ProxyVF_ID;                 /* 0x0D */
+	U16                     Reserved4;                  /* 0x0E */
     U32                     Reserved3;                  /* 0x10 */
     MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
     U32                     PageAddress;                /* 0x18 */
@@ -915,6 +923,120 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
 #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
 #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)
 
+/* IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+	U16                     Flags;                /* 0x00 */
+	U16                     Reserved1;            /* 0x02 */
+	U16
+		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
+	U32                     Reserved2;            /* 0x0C */
+	U32                     Reserved3;            /* 0x10 */
+	U32                     Reserved4;            /* 0x14 */
+} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
+Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
+
+/* defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;               /* 0x00 */
+	U32                     Reserved1;            /* 0x04 */
+	U32                     Reserved2;            /* 0x08 */
+	U8                      NumSensors;           /* 0x0C */
+	U8                      PollingInterval;      /* 0x0D */
+	U16                     Reserved3;            /* 0x0E */
+	MPI2_IOUNIT8_SENSOR
+			Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)
+
+
+/* IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+	U16                     CurrentTemperature;     /* 0x00 */
+	U16                     Reserved1;              /* 0x02 */
+	U8                      Flags;                  /* 0x04 */
+	U8                      Reserved2;              /* 0x05 */
+	U16                     Reserved3;              /* 0x06 */
+	U32                     Reserved4;              /* 0x08 */
+	U32                     Reserved5;              /* 0x0C */
+} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
+Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
+
+/* defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+	MPI2_CONFIG_PAGE_HEADER Header;                /* 0x00 */
+	U32                     Reserved1;             /* 0x04 */
+	U32                     Reserved2;             /* 0x08 */
+	U8                      NumSensors;            /* 0x0C */
+	U8                      Reserved4;             /* 0x0D */
+	U16                     Reserved3;             /* 0x0E */
+	MPI2_IOUNIT9_SENSOR
+			Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)
+
+
+/* IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+	U8                      CreditPercent;      /* 0x00 */
+	U8                      Reserved1;          /* 0x01 */
+	U16                     Reserved2;          /* 0x02 */
+} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
+Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+	MPI2_CONFIG_PAGE_HEADER Header;                    /* 0x00 */
+	U8                      NumFunctions;             /* 0x04 */
+	U8                      Reserved1;              /* 0x05 */
+	U16                     Reserved2;              /* 0x06 */
+	U32                     Reserved3;              /* 0x08 */
+	U32                     Reserved4;		/* 0x0C */
+	MPI2_IOUNIT10_FUNCTION
+		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)
+
 
 
 /****************************************************************************
@@ -1022,12 +1144,12 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_7
     U32                     Reserved1;                  /* 0x04 */
     U32                     EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
     U16                     SASBroadcastPrimitiveMasks; /* 0x18 */
-    U16                     Reserved2;                  /* 0x1A */
+	U16                     SASNotifyPrimitiveMasks;    /* 0x1A */
     U32                     Reserved3;                  /* 0x1C */
 } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
   Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
 
-#define MPI2_IOCPAGE7_PAGEVERSION                       (0x01)
+#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)
 
 
 /* IOC Page 8 */
@@ -2070,16 +2192,16 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
 #define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
 
 /* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x000001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x000000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x000000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x000000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x000000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x000000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x000000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x000000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x000000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x000000001)
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
 
 
 
@@ -2266,6 +2388,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
 
 /* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
 #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
 #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)

diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 1f0c190..6bef17e 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2_ioc.h
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.16
+ *  mpi2_ioc.h Version:  02.00.17
  *
  *  Version History
  *  ---------------
@@ -104,6 +104,12 @@
  *  05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
  *                      Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
  *  11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ *  02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
+ *                      SASNotifyPrimitiveMasks field to
+ *                      MPI2_EVENT_NOTIFICATION_REQUEST.
+ *                      Added Temperature Threshold Event.
+ *                      Added Host Message Event.
+ *                      Added Send Host Message request and reply.
  *  --------------------------------------------------------------------------
  */
 
@@ -421,7 +427,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
     U32                     Reserved6;                      /* 0x10 */
     U32                     EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
     U16                     SASBroadcastPrimitiveMasks;     /* 0x24 */
-    U16                     Reserved7;                      /* 0x26 */
+	 U16                     SASNotifyPrimitiveMasks;        /* 0x26 */
     U32                     Reserved8;                      /* 0x28 */
 } MPI2_EVENT_NOTIFICATION_REQUEST,
   MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
@@ -476,6 +482,9 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
 #define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
 #define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
 
 
 /* Log Entry Added Event data */
@@ -507,6 +516,39 @@ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
   MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
   Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
 
+/* Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+	U16         Status;                             /* 0x00 */
+	U8          SensorNum;                          /* 0x02 */
+	U8          Reserved1;                          /* 0x03 */
+	U16         CurrentTemperature;                 /* 0x04 */
+	U16         Reserved2;                          /* 0x06 */
+	U32         Reserved3;                          /* 0x08 */
+	U32         Reserved4;                          /* 0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
+Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
+
+/* Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
+
+
+/* Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+	U8          SourceVF_ID;                        /* 0x00 */
+	U8          Reserved1;                          /* 0x01 */
+	U16         Reserved2;                          /* 0x02 */
+	U32         Reserved3;                          /* 0x04 */
+	U32         HostData[1];                        /* 0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
+
+
 /* Hard Reset Received Event data */
 
 typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
@@ -749,6 +791,24 @@ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
 #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
 #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
 
+/* SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+	U8                      PhyNum;                     /* 0x00 */
+	U8                      Port;                       /* 0x01 */
+	U8                      Reserved1;                  /* 0x02 */
+	U8                      Primitive;                  /* 0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+Mpi2EventDataSasNotifyPrimitive_t,
+MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
+
+/* defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
+
 
 /* SAS Initiator Device Status Change Event data */
 
@@ -1001,6 +1061,53 @@ typedef struct _MPI2_EVENT_ACK_REPLY
 
 
 /****************************************************************************
+*  SendHostMessage message
+****************************************************************************/
+
+/* SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+	U16                     HostDataLength;                 /* 0x00 */
+	U8                      ChainOffset;                    /* 0x02 */
+	U8                      Function;                       /* 0x03 */
+	U16                     Reserved1;                      /* 0x04 */
+	U8                      Reserved2;                      /* 0x06 */
+	U8                      MsgFlags;                       /* 0x07 */
+	U8                      VP_ID;                          /* 0x08 */
+	U8                      VF_ID;                          /* 0x09 */
+	U16                     Reserved3;                      /* 0x0A */
+	U8                      Reserved4;                      /* 0x0C */
+	U8                      DestVF_ID;                      /* 0x0D */
+	U16                     Reserved5;                      /* 0x0E */
+	U32                     Reserved6;                      /* 0x10 */
+	U32                     Reserved7;                      /* 0x14 */
+	U32                     Reserved8;                      /* 0x18 */
+	U32                     Reserved9;                      /* 0x1C */
+	U32                     Reserved10;                     /* 0x20 */
+	U32                     HostData[1];                    /* 0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
+
+
+/* SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+	U16                     HostDataLength;                 /* 0x00 */
+	U8                      MsgLength;                      /* 0x02 */
+	U8                      Function;                       /* 0x03 */
+	U16                     Reserved1;                      /* 0x04 */
+	U8                      Reserved2;                      /* 0x06 */
+	U8                      MsgFlags;                       /* 0x07 */
+	U8                      VP_ID;                          /* 0x08 */
+	U8                      VF_ID;                          /* 0x09 */
+	U16                     Reserved3;                      /* 0x0A */
+	U16                     Reserved4;                      /* 0x0C */
+	U16                     IOCStatus;                      /* 0x0E */
+	U32                     IOCLogInfo;                     /* 0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
+
+
+/****************************************************************************
 *  FWDownload message
 ****************************************************************************/
 
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux