The following changes since commit 96067723e46b0dd24ae7b934085ab4eff4d26a1b:
[SCSI] 3w-9xxx: fix iommu_iova leak (2011-09-26 09:28:58 -0500)
are available in the git repository at:
git://github.com/djbw/linux.git libsas-fixes
If there are going to be anymore scsi pulls for 3.1-rc here are some
collected candidates. All of these have been on the list previously.
Dan Williams (2):
libsas: fix warnings when checking sata/stp protocol
libsas: fix port->dev_list locking
Jack Wang (1):
libsas: set rphy sas_address and device type correctly
Luben Tuikov (1):
libsas: Allow expander T-T attachments
drivers/scsi/libsas/sas_discover.c | 13 +++++++----
drivers/scsi/libsas/sas_expander.c | 37 ++++++++++++++++++++++++-----------
include/scsi/libsas.h | 5 +++-
include/scsi/sas.h | 15 ++++++++++++-
4 files changed, 50 insertions(+), 20 deletions(-)
commit 339484f5e5a726a26188ca6cb10dca864d0c4b2f
Author: Jack Wang <jack_wang@xxxxxxxxx>
Date: Sat Sep 24 09:47:23 2011 +0000
libsas: set rphy sas_address and device type correctly
Before:
# cat /sys/class/sas_phy/phy-6\:0\:6/device_type
none
# cat /sys/class/sas_phy/phy-6\:0\:6/sas_address
0x0000000000000000
After:
# cat /sys/class/sas_phy/phy-6\:0\:6/device_type
end device
# cat /sys/class/sas_phy/phy-6\:0\:6/sas_address
0x500000e0191ce732
Signed-off-by: Jack Wang <jack_wang@xxxxxxxxx>
Tested-by: Crystal Yu <crystal_yu@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
commit 0051c3753833995b4e26be70033d9ba8e2e89de9
Author: Dan Williams <dan.j.williams@xxxxxxxxx>
Date: Wed Sep 21 07:47:16 2011 +0000
libsas: fix port->dev_list locking
port->dev_list maintains a list of devices attached to a given sas root port.
It needs to be mutated under a lock as contexts outside of the
single-threaded-libsas-workqueue access the list via sas_find_dev_by_rphy().
Fixup locations where the list was being mutated without a lock.
This is a follow-up to commit 5911e963 "[SCSI] libsas: remove expander
from dev list on error", where Luben noted [1]:
> 2/ We have unlocked list manipulations in sas_ex_discover_end_dev(),
> sas_unregister_common_dev(), and sas_ex_discover_end_dev()
Yes, I can see that and that is very unfortunate.
[1]: http://marc.info/?l=linux-scsi&m=131480962006471&w=2
Cc: Xiangliang Yu <yuxiangl@xxxxxxxxxxx>
Cc: Jack Wang <jack_wang@xxxxxxxxx>
Cc: Mark Salyzyn <msalyzyn@xxxxxxxxxxxxxx>
Cc: Luben Tuikov <ltuikov@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
commit 3c6006693b1e5e4a8c7f19623092dee95a377916
Author: Dan Williams <dan.j.williams@xxxxxxxxx>
Date: Sat Sep 24 09:07:38 2011 +0000
libsas: fix warnings when checking sata/stp protocol
Several sas drivers legitimately check the protocol against the union of
SAS_PROTOCOL_SATA and SAS_PROTOCOL_STP. Provide a SAS_PROTOCOL_STP_ALL
to silence warnings like:
drivers/scsi/pm8001/pm8001_sas.c:438:3: warning: case value ‘5’ not in enumerated type ‘enum sas_protocol’ [-Wswitch]
drivers/scsi/mvsas/mv_sas.c:798:2: warning: case value ‘5’ not in enumerated type ‘enum sas_protocol’ [-Wswitch]
drivers/scsi/mvsas/mv_sas.c:1783:2: warning: case value ‘5’ not in enumerated type ‘enum sas_protocol’ [-Wswitch]
drivers/scsi/mvsas/mv_sas.c:1886:2: warning: case value ‘5’ not in enumerated type ‘enum sas_protocol’ [-Wswitch]
drivers/scsi/isci/request.c:3565:2: warning: case value ‘5’ not in enumerated type ‘enum sas_protocol’ [-Wswitch]
Cc: Xiangliang Yu <yuxiangl@xxxxxxxxxxx>
Cc: Jack Wang <jack_wang@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Acked-by: Jack Wang <jack_wang@xxxxxxxxx>
commit ef6be00f9fc3351beb3ceb9e7117f6f036f0f64e
Author: Luben Tuikov <ltuikov@xxxxxxxxx>
Date: Sat Sep 24 09:02:13 2011 +0000
libsas: Allow expander T-T attachments
Allow expander table-to-table attachments for
expanders that support it.
Signed-off-by: Luben Tuikov <ltuikov@xxxxxxxxx>
Cc: <stable@xxxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Acked-by: Mark Salyzyn <mark_salyzyn@xxxxxxxxxxxxxx>
Acked-by: Jack Wang <jack_wang@xxxxxxxxx>
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index f583193..54a5199 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -219,17 +219,20 @@ out_err2:
/* ---------- Device registration and unregistration ---------- */
-static inline void sas_unregister_common_dev(struct domain_device *dev)
+static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_device *dev)
{
sas_notify_lldd_dev_gone(dev);
if (!dev->parent)
dev->port->port_dev = NULL;
else
list_del_init(&dev->siblings);
+
+ spin_lock_irq(&port->dev_list_lock);
list_del_init(&dev->dev_list_node);
+ spin_unlock_irq(&port->dev_list_lock);
}
-void sas_unregister_dev(struct domain_device *dev)
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev)
{
if (dev->rphy) {
sas_remove_children(&dev->rphy->dev);
@@ -241,15 +244,15 @@ void sas_unregister_dev(struct domain_device *dev)
kfree(dev->ex_dev.ex_phy);
dev->ex_dev.ex_phy = NULL;
}
- sas_unregister_common_dev(dev);
+ sas_unregister_common_dev(port, dev);
}
void sas_unregister_domain_devices(struct asd_sas_port *port)
{
struct domain_device *dev, *n;
- list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
- sas_unregister_dev(dev);
+ list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node)
+ sas_unregister_dev(port, dev);
port->port->rphy = NULL;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index c9e3dc0..7fbb7c5 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -199,6 +199,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
phy->virtual = dr->virtual;
phy->last_da_index = -1;
+ phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
+ phy->phy->identify.device_type = phy->attached_dev_type;
phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
phy->phy->identify.target_port_protocols = phy->attached_tproto;
phy->phy->identify.phy_identifier = phy_id;
@@ -329,6 +331,7 @@ static void ex_assign_report_general(struct domain_device *dev,
dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.t2t_supp = rg->t2t_supp;
dev->ex_dev.conf_route_table = rg->conf_route_table;
dev->ex_dev.configuring = rg->configuring;
memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
@@ -751,7 +754,10 @@ static struct domain_device *sas_ex_discover_end_dev(
out_list_del:
sas_rphy_free(child->rphy);
child->rphy = NULL;
+
+ spin_lock_irq(&parent->port->dev_list_lock);
list_del(&child->dev_list_node);
+ spin_unlock_irq(&parent->port->dev_list_lock);
out_free:
sas_port_delete(phy->port);
out_err:
@@ -1133,15 +1139,17 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
};
struct domain_device *parent = child->parent;
- sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
- "has %c:%c routing link!\n",
+ sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex %016llx "
+ "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n",
ex_type[parent->dev_type],
SAS_ADDR(parent->sas_addr),
+ parent->ex_dev.t2t_supp,
parent_phy->phy_id,
ex_type[child->dev_type],
SAS_ADDR(child->sas_addr),
+ child->ex_dev.t2t_supp,
child_phy->phy_id,
ra_char[parent_phy->routing_attr],
@@ -1238,10 +1246,15 @@ static int sas_check_parent_topology(struct domain_device *child)
sas_print_parent_topology_bug(child, parent_phy, child_phy);
res = -ENODEV;
}
- } else if (parent_phy->routing_attr == TABLE_ROUTING &&
- child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
- sas_print_parent_topology_bug(child, parent_phy, child_phy);
- res = -ENODEV;
+ } else if (parent_phy->routing_attr == TABLE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
+ (child_phy->routing_attr == TABLE_ROUTING &&
+ child_ex->t2t_supp && parent_ex->t2t_supp)) {
+ /* All good */;
+ } else {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
}
break;
case FANOUT_DEV:
@@ -1729,7 +1742,7 @@ out:
return res;
}
-static void sas_unregister_ex_tree(struct domain_device *dev)
+static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev)
{
struct expander_device *ex = &dev->ex_dev;
struct domain_device *child, *n;
@@ -1738,11 +1751,11 @@ static void sas_unregister_ex_tree(struct domain_device *dev)
child->gone = 1;
if (child->dev_type == EDGE_DEV ||
child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
+ sas_unregister_ex_tree(port, child);
else
- sas_unregister_dev(child);
+ sas_unregister_dev(port, child);
}
- sas_unregister_dev(dev);
+ sas_unregister_dev(port, dev);
}
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
@@ -1759,9 +1772,9 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
child->gone = 1;
if (child->dev_type == EDGE_DEV ||
child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
+ sas_unregister_ex_tree(parent->port, child);
else
- sas_unregister_dev(child);
+ sas_unregister_dev(parent->port, child);
break;
}
}
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index ee86606..67be7f5 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -142,8 +142,11 @@ struct expander_device {
u16 ex_change_count;
u16 max_route_indexes;
u8 num_phys;
+
+ u8 t2t_supp:1;
u8 configuring:1;
u8 conf_route_table:1;
+
u8 enclosure_logical_id[8];
struct ex_phy *ex_phy;
@@ -652,7 +655,7 @@ int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
int sas_discover_sata(struct domain_device *);
int sas_discover_end_dev(struct domain_device *);
-void sas_unregister_dev(struct domain_device *);
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
void sas_init_dev(struct domain_device *);
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index e9fd022..3a00297 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -108,6 +108,7 @@ enum sas_protocol {
SAS_PROTOCOL_STP = 0x04,
SAS_PROTOCOL_SSP = 0x08,
SAS_PROTOCOL_ALL = 0x0E,
+ SAS_PROTOCOL_STP_ALL = SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
};
/* From the spec; local phys only */
@@ -341,7 +342,12 @@ struct report_general_resp {
u8 conf_route_table:1;
u8 configuring:1;
- u8 _r_b:6;
+ u8 config_others:1;
+ u8 orej_retry_supp:1;
+ u8 stp_cont_awt:1;
+ u8 self_config:1;
+ u8 zone_config:1;
+ u8 t2t_supp:1;
u8 _r_c;
@@ -528,7 +534,12 @@ struct report_general_resp {
u8 _r_a;
u8 num_phys;
- u8 _r_b:6;
+ u8 t2t_supp:1;
+ u8 zone_config:1;
+ u8 self_config:1;
+ u8 stp_cont_awt:1;
+ u8 orej_retry_supp:1;
+ u8 config_others:1;
u8 configuring:1;
u8 conf_route_table:1;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
