On the pm8001, when a device is in the process of going away (device
power off or hot plug), depending on the timing, the driver would return
SAS_PHY_DOWN as the return value to the queuecommand DEV_IS_GONE logic.
The net result is an near infinite retry (especially if SAS debugging is
enabled), the logs will fill with:
kernel: mpi_ssp_completion 2119:e21:SSP IO status 0x13 tag 0xcc1c0000
dlen=90 param=0xe
kernel: wwn=5000c50034069e86 cdb=12 00 00 00 5a 00 00 00 00 00 00 00 00
00 00 00
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
kernel: sas: lldd_execute_task returned: 138
. . .
This patch changes to leverage the port_attached logic to complete the
command with a status of PHY_DOWN so that the disposition can be handled
immediately and correctly.
The real patch is enclosed as an attachment since Outlook is my current
MTA.
Signed-off-by: Mark Salyzyn <mark_salyzyn@xxxxxxxxxxxxxxxx>
Cc: James Bottomley <jbottomley@xxxxxxxxxxxxx>
Cc: Jack Wang <jack_wang@xxxxxxxxx>
pm8001_sas.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff -ru scsi-misc-2.6/drivers/scsi/pm8001/pm8001_sas.c
scsi-misc-2.6.new/drivers/scsi/pm8001/pm8001_sas.c
--- scsi-misc-2.6/drivers/scsi/pm8001/pm8001_sas.c 2011-08-31
08:32:21.000000000 -0400
+++ scsi-misc-2.6.new/drivers/scsi/pm8001/pm8001_sas.c 2011-09-22
11:36:24.000000000 -0400
@@ -385,21 +385,8 @@
do {
dev = t->dev;
pm8001_dev = dev->lldd_dev;
- if (DEV_IS_GONE(pm8001_dev)) {
- if (pm8001_dev) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %d not
ready.\n",
- pm8001_dev->device_id));
- } else {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %016llx
not "
- "ready.\n",
SAS_ADDR(dev->sas_addr)));
- }
- rc = SAS_PHY_DOWN;
- goto out_done;
- }
port = &pm8001_ha->port[sas_find_local_port_id(dev)];
- if (!port->port_attached) {
+ if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
if (sas_protocol_ata(t->task_proto)) {
struct task_status_struct *ts =
&t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
______________________________________________________________________
This email may contain privileged or confidential information, which should only be used for the purpose for which it was sent by Xyratex. No further rights or licenses are granted to use such information. If you are not the intended recipient of this message, please notify the sender by return and delete it. You may not use, copy, disclose or rely on the information contained in it.
Internet email is susceptible to data corruption, interception and unauthorised amendment for which Xyratex does not accept liability. While we have taken reasonable precautions to ensure that this email is free of viruses, Xyratex does not accept liability for the presence of any computer viruses in this email, nor for any losses caused as a result of viruses.
Xyratex Technology Limited (03134912), Registered in England & Wales, Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
The Xyratex group of companies also includes, Xyratex Ltd, registered in Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in The People's Republic of China and Xyratex Japan Limited registered in Japan.
______________________________________________________________________
Attachment:
pm8001_DEV_IS_GONE.patch
Description: pm8001_DEV_IS_GONE.patch
