https://bugzilla.kernel.org/show_bug.cgi?id=41552 --- Comment #12 from Anonymous Emailer <anonymous@xxxxxxxxxxxxxxxxxxxx> 2011-08-25 21:02:55 --- Reply-To: vgoyal@xxxxxxxxxx On Wed, Aug 24, 2011 at 03:11:57PM -0500, Mark Petersen wrote: > > I was finally able to run it with the deadline scheduler, and got the same performance. You mean you see 40% regression even with deadline? If yes, then it is not a IO scheduler specific issue. > Unfortunately, I am not able to use the blktrace tool as it requires a version of libc that we do not have on the system (we have 2.5 and it requires at least 2.7). Is there anything else I can use to trace it? > You can try using tracing functionality. - mount -t debugfs none /sys/kernel/debug - Enable tracing on the disk you are doing IO to. echo 1 > /sys/block/sda/trace/enable - Enable block traces echo blk > /sys/kernel/debug/tracing/current_tracer - cat /sys/kernel/debug/tracing/trace_pipe > /tmp/trace_output Let it run for few seconds. Interrupt and kill cat process. /tmp/trace_output should have useful tracing info. Thanks Vivek > Thanks, > Mark > > > Date: Mon, 22 Aug 2011 15:48:54 -0400 > > From: vgoyal@xxxxxxxxxx > > To: mpete_06@xxxxxxxxxxx > > CC: bugme-daemon@xxxxxxxxxxxxxxxxxxx; axboe@xxxxxxxxx; linux-mm@xxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; akpm@xxxxxxxxxxxxxxxxxxxx > > Subject: Re: [Bugme-new] [Bug 41552] New: Performance of writing and reading from multiple drives decreases by 40% when going from Linux Kernel 2.6.36.4 to 2.6.37 (and beyond) > > > > On Mon, Aug 22, 2011 at 12:24:43PM -0700, Andrew Morton wrote: > > > > > > (switched to email. Please respond via emailed reply-to-all, not via the > > > bugzilla web interface). > > > > > > On Mon, 22 Aug 2011 15:20:41 GMT > > > bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: > > > > > > > https://bugzilla.kernel.org/show_bug.cgi?id=41552 > > > > > > > > Summary: Performance of writing and reading from multiple > > > > drives decreases by 40% when going from Linux Kernel > > > > 2.6.36.4 to 2.6.37 (and beyond) > > > > Product: IO/Storage > > > > Version: 2.5 > > > > Kernel Version: 2.6.37 > > > > Platform: All > > > > OS/Version: Linux > > > > Tree: Mainline > > > > Status: NEW > > > > Severity: normal > > > > Priority: P1 > > > > Component: SCSI > > > > AssignedTo: linux-scsi@xxxxxxxxxxxxxxx > > > > ReportedBy: mpete_06@xxxxxxxxxxx > > > > Regression: No > > > > > > > > > > > > We have an application that will write and read from every sector on a drive. > > > > The application can perform these tasks on multiple drives at the same time. > > > > It is designed to run on top of the Linux Kernel, which we periodically update > > > > so that we can get the latest device drivers. When performing the last update > > > > from 2.6.33.2 to 2.6.37, we found that the performance of a set of drives > > > > decreased by some 40% (took 3 hours and 11 minutes to write and read from 5 > > > > drives on 2.6.37 versus 2 hours and 12 minutes on 2.6.33.3). I was able to > > > > determine that the issue was in the 2.6.37 Kernel as I was able to run it with > > > > the 2.6.36.4 kernel, and it had the better performance. After seeing that I/O > > > > throttling was introduced in the 2.6.37 Kernel, I naturally suspected that. > > > > However, by default, all the throttling was turned off (I attached the actual > > > > .config that was used to build the kernel). I then tried to turn on the > > > > throttling and set it to a high number to see what would happen. When I did > > > > that, I was able to reduce the time from 3 hours and 11 minutes to 2 hours and > > > > 50 minutes. There seems to be something there that changed that is impacting > > > > performance on multiple drives. When we do this same test with only one drive, > > > > the performance is identical between the systems. This issue still occurs on > > > > Kernel 3.0.2. > > > > > > > > > > Are you able to determine whether this regression is due to slower > > > reading, to slower writing or to both? > > > > Mark, > > > > As your initial comment says that you see 40% regression even when block > > throttling infrastructure is not enabled, I think it is not related to > > throttling as blk_throtl_bio() is null when BLK_DEV_THROTTLING=n. > > > > What IO scheduler are you using? Can you try switching IO scheduler to > > deadline and see if regression is still there. Trying to figure out if > > it has anything to do with IO scheduler. > > > > What file system are you using with what options? Are you using device > > mapper to create some special configuration on multiple disks? > > > > Also can you take a trace (blktrace) of any of the disks for 30 seconds > > both without regression and after regression and upload it somewhere. > > Staring at it might give some clues. > > > > Thanks > > Vivek > -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
