From: Harish Zunjarrao <harish.zunjarrao@xxxxxxxxxx>
This command is used to read ACB params from firmware
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@xxxxxxxxxx>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_bsg.c | 68 +++++++++++++++++++++++++++++++++++++++
drivers/scsi/qla4xxx/ql4_bsg.h | 1 +
drivers/scsi/qla4xxx/ql4_glbl.h | 4 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 15 +++++---
4 files changed, 80 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
index 4704a52..8acdc58 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.c
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -381,6 +381,71 @@ leave:
return rval;
}
+static int
+qla4xxx_bsg_get_acb(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t acb_type = 0;
+ uint32_t len = 0;
+ dma_addr_t acb_dma;
+ uint8_t *acb = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ /* Only 4022 and above adapters are supported */
+ if (is_qla4010(ha))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ len = bsg_job->reply_payload.payload_len;
+ if (len < sizeof(struct addr_ctrl_blk)) {
+ ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n",
+ __func__, len);
+ rval = -EINVAL;
+ goto leave;
+ }
+
+ acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL);
+ if (!acb) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else {
+ bsg_reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt,
+ acb, len);
+ bsg_reply->result = DID_OK << 16;
+ }
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma);
+leave:
+ return rval;
+}
+
/**
* qla4xxx_process_vendor_specific - handle vendor specific bsg request
* @job: iscsi_bsg_job to handle
@@ -411,6 +476,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
case QLISCSI_VND_RESTORE_DEFAULTS:
return qla4xxx_restore_defaults(bsg_job);
+ case QLISCSI_VND_GET_ACB:
+ return qla4xxx_bsg_get_acb(bsg_job);
+
default:
ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
"0x%x\n", __func__, bsg_req->msgcode);
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
index 84a1391..c6a03645 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.h
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -14,5 +14,6 @@
#define QLISCSI_VND_READ_NVRAM 4
#define QLISCSI_VND_UPDATE_NVRAM 5
#define QLISCSI_VND_RESTORE_DEFAULTS 6
+#define QLISCSI_VND_GET_ACB 7
#endif
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 1a0f601..160db9d 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -56,8 +56,8 @@ int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
int qla4xxx_disable_acb(struct scsi_qla_host *ha);
int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t acb_dma);
-int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
- uint32_t *mbox_sts, dma_addr_t acb_dma);
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+ uint32_t acb_type, uint32_t len);
int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
uint32_t ip_idx, uint32_t *sts);
void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index dfc38aa..de733a7 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1425,18 +1425,21 @@ int qla4xxx_disable_acb(struct scsi_qla_host *ha)
return status;
}
-int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
- uint32_t *mbox_sts, dma_addr_t acb_dma)
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+ uint32_t acb_type, uint32_t len)
{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
int status = QLA_SUCCESS;
- memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
- memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
mbox_cmd[0] = MBOX_CMD_GET_ACB;
- mbox_cmd[1] = 0; /* Primary ACB */
+ mbox_cmd[1] = acb_type;
mbox_cmd[2] = LSDW(acb_dma);
mbox_cmd[3] = MSDW(acb_dma);
- mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
+ mbox_cmd[4] = len;
status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
if (status != QLA_SUCCESS) {
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
