The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it. Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).
Signed-off-by: Jon Mason <jdmason@xxxxxxxx>
---
drivers/scsi/qla2xxx/qla_init.c | 4 ++--
drivers/scsi/qla2xxx/qla_nx.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 920b76b..62adfe0 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -733,7 +733,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
pcix_set_mmrbc(ha->pdev, 2048);
/* PCIe -- adjust Maximum Read Request Size (2048). */
- if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 2048);
pci_disable_rom(ha->pdev);
@@ -769,7 +769,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/* PCIe -- adjust Maximum Read Request Size (2048). */
- if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+ if (pci_is_pcie(ha->pdev))
pcie_set_readrq(ha->pdev, 2048);
pci_disable_rom(ha->pdev);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index e1138bc..fe58b85 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1598,7 +1598,7 @@ qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str)
char lwstr[6];
uint16_t lnk;
- pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_reg = pci_pcie_cap(ha->pdev);
pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk);
ha->link_width = (lnk >> 4) & 0x3f;
@@ -2499,7 +2499,7 @@ qla82xx_start_firmware(scsi_qla_host_t *vha)
}
/* Negotiated Link width */
- pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_cap = pci_pcie_cap(ha->pdev);
pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk);
ha->link_width = (lnk >> 4) & 0x3f;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f461925..b39f62e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -426,12 +426,12 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
uint32_t pci_bus;
int pcie_reg;
- pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ pcie_reg = pci_pcie_cap(ha->pdev);
if (pcie_reg) {
char lwstr[6];
uint16_t pcie_lstat, lspeed, lwidth;
- pcie_reg += 0x12;
+ pcie_reg += PCI_EXP_LNKCAP;
pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
lwidth = (pcie_lstat &
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
