[PATCH 07/12] fcoe: Amends previous patch, Round-robin based selection of CPU for post processing of incoming request for FCoE target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kiran Patil <kiran.patil@xxxxxxxxx>

Problem: Selection of RX queue on target is based on RX-ID. FCoE used 8 Net Rx queues.
HW post the packets based on rx_id % num_rx_queue. Due to this has based filtering,
only one CPU is busy servicing incoming request including post-processing of incoming
request. This is gating factor because
1. Only one CPU is utilized 100% while others CPUs are not used at all.
2. CPU which received request assign "sequence' by selecting exchange from
   per CPU pool (num_ddp_context / num_online_cpus, approxi.). Due to which if
   if rate of incoming request is higher than rate of servicing request, existing
   code path end of sending "BUSY" response (SAM_STAT_BUSY because unable to
   allocate exchange).

Fix: Fan-out incoming request to all other CPUs excluding the CPU which is receiving
all incoiming request. This path also addresses, selecting same CPU based on rx_id
from received frame for completion of the request such as "releasing exchange
to the per CPU Pool". This fix is applicable for FCoE target since initiator
code path already takes care of selecting CPU to complete post-processing of request
once OX_ID is assigned.

Notes: N/A

Dependencines: N/A

Signed-off-by: Kiran Patil <kiran.patil@xxxxxxxxx>
Signed-off-by: Robert Love <robert.w.love@xxxxxxxxx>
---
 drivers/scsi/fcoe/fcoe.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index da73115..522fbaa 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1358,7 +1358,11 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev,
 			do {
 				cpu = fcoe_select_cpu(cpu);
 			} while (!cpu_online(cpu));
-		}
+		} else  if ((fh->fh_type == FC_TYPE_FCP) &&
+			    (ntohs(fh->fh_rx_id) != FC_XID_UNKNOWN)) {
+			cpu = ntohs(fh->fh_rx_id) & fc_cpu_mask;
+		} else
+			cpu = smp_processor_id();
 	}
 	fps = &per_cpu(fcoe_percpu, cpu);
 	spin_lock_bh(&fps->fcoe_rx_list.lock);

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux