Extend BSG infrastructure and add link diagnostics:
- Removed unnecessary copies in handling pass-through mbox cmds.
- Add embedded SLI_CONFIG support for BSG.
- Add multibuffer support.
- Implemented the setting up and tearing down Lancer FC device for performing
internal and external loopback diagnostic tests.
- Implemented the driver support for performing new link diagnostic tests
Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc.h | 38
lpfc_bsg.c | 2415 ++++++++++++++++++++++++++++++++++++++++++++++--------------
lpfc_bsg.h | 87 +-
lpfc_hw4.h | 82 ++
lpfc_init.c | 8
5 files changed, 2072 insertions(+), 558 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
--- a/drivers/scsi/lpfc/lpfc_bsg.c 2011-05-23 17:05:08.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_bsg.c 2011-05-23 17:10:55.000000000 -0400
@@ -23,6 +23,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/list.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
@@ -79,8 +80,7 @@ struct lpfc_bsg_iocb {
struct lpfc_bsg_mbox {
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *mb;
- struct lpfc_dmabuf *rxbmp; /* for BIU diags */
- struct lpfc_dmabufext *dmp; /* for BIU diags */
+ struct lpfc_dmabuf *dmabuffers; /* for BIU diags */
uint8_t *ext; /* extended mailbox data */
uint32_t mbOffset; /* from app */
uint32_t inExtWLen; /* from app */
@@ -1469,11 +1469,91 @@ send_mgmt_rsp_exit:
}
/**
- * lpfc_bsg_diag_mode - process a LPFC_BSG_VENDOR_DIAG_MODE bsg vendor command
+ * lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode
+ * @phba: Pointer to HBA context object.
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE
+ *
+ * This function is responsible for preparing driver for diag loopback
+ * on device.
+ */
+static int
+lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job)
+{
+ struct lpfc_vport **vports;
+ struct Scsi_Host *shost;
+ struct lpfc_sli *psli;
+ struct lpfc_sli_ring *pring;
+ int i = 0;
+
+ psli = &phba->sli;
+ if (!psli)
+ return -ENODEV;
+
+ pring = &psli->ring[LPFC_FCP_RING];
+ if (!pring)
+ return -ENODEV;
+
+ if ((phba->link_state == LPFC_HBA_ERROR) ||
+ (psli->sli_flag & LPFC_BLOCK_MGMT_IO) ||
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
+ return -EACCES;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ scsi_block_requests(shost);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ } else {
+ shost = lpfc_shost_from_vport(phba->pport);
+ scsi_block_requests(shost);
+ }
+
+ while (pring->txcmplq_cnt) {
+ if (i++ > 500) /* wait up to 5 seconds */
+ break;
+ msleep(10);
+ }
+ return 0;
+}
+
+/**
+ * lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode
+ * @phba: Pointer to HBA context object.
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE
+ *
+ * This function is responsible for driver exit processing of setting up
+ * diag loopback mode on device.
+ */
+static void
+lpfc_bsg_diag_mode_exit(struct lpfc_hba *phba)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_vport **vports;
+ int i;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ scsi_unblock_requests(shost);
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ } else {
+ shost = lpfc_shost_from_vport(phba->pport);
+ scsi_unblock_requests(shost);
+ }
+ return;
+}
+
+/**
+ * lpfc_sli3_bsg_diag_loopback_mode - process an sli3 bsg vendor command
+ * @phba: Pointer to HBA context object.
* @job: LPFC_BSG_VENDOR_DIAG_MODE
*
- * This function is responsible for placing a port into diagnostic loopback
- * mode in order to perform a diagnostic loopback test.
+ * This function is responsible for placing an sli3 port into diagnostic
+ * loopback mode in order to perform a diagnostic loopback test.
* All new scsi requests are blocked, a small delay is used to allow the
* scsi requests to complete then the link is brought down. If the link is
* is placed in loopback mode then scsi requests are again allowed
@@ -1481,17 +1561,11 @@ send_mgmt_rsp_exit:
* All of this is done in-line.
*/
static int
-lpfc_bsg_diag_mode(struct fc_bsg_job *job)
+lpfc_sli3_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job)
{
- struct Scsi_Host *shost = job->shost;
- struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
struct diag_mode_set *loopback_mode;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING];
uint32_t link_flags;
uint32_t timeout;
- struct lpfc_vport **vports;
LPFC_MBOXQ_t *pmboxq;
int mbxstatus;
int i = 0;
@@ -1500,53 +1574,33 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *jo
/* no data to return just the return code */
job->reply->reply_payload_rcv_len = 0;
- if (job->request_len <
- sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_set)) {
+ if (job->request_len < sizeof(struct fc_bsg_request) +
+ sizeof(struct diag_mode_set)) {
lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
- "2738 Received DIAG MODE request below minimum "
- "size\n");
+ "2738 Received DIAG MODE request size:%d "
+ "below the minimum size:%d\n",
+ job->request_len,
+ (int)(sizeof(struct fc_bsg_request) +
+ sizeof(struct diag_mode_set)));
rc = -EINVAL;
goto job_error;
}
+ rc = lpfc_bsg_diag_mode_enter(phba, job);
+ if (rc)
+ goto job_error;
+
+ /* bring the link to diagnostic mode */
loopback_mode = (struct diag_mode_set *)
job->request->rqst_data.h_vendor.vendor_cmd;
link_flags = loopback_mode->type;
timeout = loopback_mode->timeout * 100;
- if ((phba->link_state == LPFC_HBA_ERROR) ||
- (psli->sli_flag & LPFC_BLOCK_MGMT_IO) ||
- (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
- rc = -EACCES;
- goto job_error;
- }
-
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmboxq) {
rc = -ENOMEM;
- goto job_error;
- }
-
- vports = lpfc_create_vport_work_array(phba);
- if (vports) {
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- shost = lpfc_shost_from_vport(vports[i]);
- scsi_block_requests(shost);
- }
-
- lpfc_destroy_vport_work_array(phba, vports);
- } else {
- shost = lpfc_shost_from_vport(phba->pport);
- scsi_block_requests(shost);
- }
-
- while (pring->txcmplq_cnt) {
- if (i++ > 500) /* wait up to 5 seconds */
- break;
-
- msleep(10);
+ goto loopback_mode_exit;
}
-
memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t));
pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
pmboxq->u.mb.mbxOwner = OWN_HOST;
@@ -1600,17 +1654,7 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *jo
rc = -ENODEV;
loopback_mode_exit:
- vports = lpfc_create_vport_work_array(phba);
- if (vports) {
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- shost = lpfc_shost_from_vport(vports[i]);
- scsi_unblock_requests(shost);
- }
- lpfc_destroy_vport_work_array(phba, vports);
- } else {
- shost = lpfc_shost_from_vport(phba->pport);
- scsi_unblock_requests(shost);
- }
+ lpfc_bsg_diag_mode_exit(phba);
/*
* Let SLI layer release mboxq if mbox command completed after timeout.
@@ -1628,102 +1672,504 @@ job_error:
}
/**
- * lpfcdiag_loop_self_reg - obtains a remote port login id
- * @phba: Pointer to HBA context object
- * @rpi: Pointer to a remote port login id
+ * lpfc_sli4_bsg_set_link_diag_state - set sli4 link diag state
+ * @phba: Pointer to HBA context object.
+ * @diag: Flag for set link to diag or nomral operation state.
*
- * This function obtains a remote port login id so the diag loopback test
- * can send and receive its own unsolicited CT command.
- **/
-static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi)
+ * This function is responsible for issuing a sli4 mailbox command for setting
+ * link to either diag state or normal operation state.
+ */
+static int
+lpfc_sli4_bsg_set_link_diag_state(struct lpfc_hba *phba, uint32_t diag)
{
- LPFC_MBOXQ_t *mbox;
- struct lpfc_dmabuf *dmabuff;
- int status;
+ LPFC_MBOXQ_t *pmboxq;
+ struct lpfc_mbx_set_link_diag_state *link_diag_state;
+ uint32_t req_len, alloc_len;
+ int mbxstatus = MBX_SUCCESS, rc;
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq)
return -ENOMEM;
- if (phba->sli_rev == LPFC_SLI_REV4)
- *rpi = lpfc_sli4_alloc_rpi(phba);
- status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID,
- (uint8_t *)&phba->pport->fc_sparam, mbox, *rpi);
- if (status) {
- mempool_free(mbox, phba->mbox_mem_pool);
- if (phba->sli_rev == LPFC_SLI_REV4)
- lpfc_sli4_free_rpi(phba, *rpi);
- return -ENOMEM;
+ req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE,
+ req_len, LPFC_SLI4_MBX_EMBED);
+ if (alloc_len != req_len) {
+ rc = -ENOMEM;
+ goto link_diag_state_set_out;
}
+ link_diag_state = &pmboxq->u.mqe.un.link_diag_state;
+ bf_set(lpfc_mbx_set_diag_state_link_num, &link_diag_state->u.req,
+ phba->sli4_hba.link_state.number);
+ bf_set(lpfc_mbx_set_diag_state_link_type, &link_diag_state->u.req,
+ phba->sli4_hba.link_state.type);
+ if (diag)
+ bf_set(lpfc_mbx_set_diag_state_diag,
+ &link_diag_state->u.req, 1);
+ else
+ bf_set(lpfc_mbx_set_diag_state_diag,
+ &link_diag_state->u.req, 0);
- dmabuff = (struct lpfc_dmabuf *) mbox->context1;
- mbox->context1 = NULL;
- mbox->context2 = NULL;
- status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
- if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
- lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
- kfree(dmabuff);
- if (status != MBX_TIMEOUT)
- mempool_free(mbox, phba->mbox_mem_pool);
- if (phba->sli_rev == LPFC_SLI_REV4)
- lpfc_sli4_free_rpi(phba, *rpi);
- return -ENODEV;
- }
+ if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0))
+ rc = 0;
+ else
+ rc = -ENODEV;
- *rpi = mbox->u.mb.un.varWords[0];
+link_diag_state_set_out:
+ if (pmboxq && (mbxstatus != MBX_TIMEOUT))
+ mempool_free(pmboxq, phba->mbox_mem_pool);
- lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
- kfree(dmabuff);
- mempool_free(mbox, phba->mbox_mem_pool);
- return 0;
+ return rc;
}
/**
- * lpfcdiag_loop_self_unreg - unregs from the rpi
- * @phba: Pointer to HBA context object
- * @rpi: Remote port login id
+ * lpfc_sli4_bsg_diag_loopback_mode - process an sli4 bsg vendor command
+ * @phba: Pointer to HBA context object.
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
- * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg
- **/
-static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi)
+ * This function is responsible for placing an sli4 port into diagnostic
+ * loopback mode in order to perform a diagnostic loopback test.
+ */
+static int
+lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job)
{
- LPFC_MBOXQ_t *mbox;
- int status;
+ struct diag_mode_set *loopback_mode;
+ uint32_t link_flags, timeout, req_len, alloc_len;
+ struct lpfc_mbx_set_link_diag_loopback *link_diag_loopback;
+ LPFC_MBOXQ_t *pmboxq = NULL;
+ int mbxstatus, i, rc = 0;
- /* Allocate mboxq structure */
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (mbox == NULL)
- return -ENOMEM;
+ /* no data to return just the return code */
+ job->reply->reply_payload_rcv_len = 0;
- lpfc_unreg_login(phba, 0, rpi, mbox);
- status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ if (job->request_len < sizeof(struct fc_bsg_request) +
+ sizeof(struct diag_mode_set)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "3011 Received DIAG MODE request size:%d "
+ "below the minimum size:%d\n",
+ job->request_len,
+ (int)(sizeof(struct fc_bsg_request) +
+ sizeof(struct diag_mode_set)));
+ rc = -EINVAL;
+ goto job_error;
+ }
- if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
- if (status != MBX_TIMEOUT)
- mempool_free(mbox, phba->mbox_mem_pool);
- return -EIO;
+ rc = lpfc_bsg_diag_mode_enter(phba, job);
+ if (rc)
+ goto job_error;
+
+ /* bring the link to diagnostic mode */
+ loopback_mode = (struct diag_mode_set *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+ link_flags = loopback_mode->type;
+ timeout = loopback_mode->timeout * 100;
+
+ rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1);
+ if (rc)
+ goto loopback_mode_exit;
+
+ /* wait for link down before proceeding */
+ i = 0;
+ while (phba->link_state != LPFC_LINK_DOWN) {
+ if (i++ > timeout) {
+ rc = -ETIMEDOUT;
+ goto loopback_mode_exit;
+ }
+ msleep(10);
}
- mempool_free(mbox, phba->mbox_mem_pool);
- if (phba->sli_rev == LPFC_SLI_REV4)
- lpfc_sli4_free_rpi(phba, rpi);
- return 0;
+ /* set up loopback mode */
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto loopback_mode_exit;
+ }
+ req_len = (sizeof(struct lpfc_mbx_set_link_diag_loopback) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK,
+ req_len, LPFC_SLI4_MBX_EMBED);
+ if (alloc_len != req_len) {
+ rc = -ENOMEM;
+ goto loopback_mode_exit;
+ }
+ link_diag_loopback = &pmboxq->u.mqe.un.link_diag_loopback;
+ bf_set(lpfc_mbx_set_diag_state_link_num,
+ &link_diag_loopback->u.req, phba->sli4_hba.link_state.number);
+ bf_set(lpfc_mbx_set_diag_state_link_type,
+ &link_diag_loopback->u.req, phba->sli4_hba.link_state.type);
+ if (link_flags == INTERNAL_LOOP_BACK)
+ bf_set(lpfc_mbx_set_diag_lpbk_type,
+ &link_diag_loopback->u.req,
+ LPFC_DIAG_LOOPBACK_TYPE_INTERNAL);
+ else
+ bf_set(lpfc_mbx_set_diag_lpbk_type,
+ &link_diag_loopback->u.req,
+ LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL);
+
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
+ if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus))
+ rc = -ENODEV;
+ else {
+ phba->link_flag |= LS_LOOPBACK_MODE;
+ /* wait for the link attention interrupt */
+ msleep(100);
+ i = 0;
+ while (phba->link_state != LPFC_HBA_READY) {
+ if (i++ > timeout) {
+ rc = -ETIMEDOUT;
+ break;
+ }
+ msleep(10);
+ }
+ }
+
+loopback_mode_exit:
+ lpfc_bsg_diag_mode_exit(phba);
+
+ /*
+ * Let SLI layer release mboxq if mbox command completed after timeout.
+ */
+ if (pmboxq && (mbxstatus != MBX_TIMEOUT))
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+
+job_error:
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ /* complete the job back to userspace if no error */
+ if (rc == 0)
+ job->job_done(job);
+ return rc;
}
/**
- * lpfcdiag_loop_get_xri - obtains the transmit and receive ids
- * @phba: Pointer to HBA context object
- * @rpi: Remote port login id
- * @txxri: Pointer to transmit exchange id
- * @rxxri: Pointer to response exchabge id
+ * lpfc_bsg_diag_loopback_mode - bsg vendor command for diag loopback mode
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
- * This function obtains the transmit and receive ids required to send
- * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp
- * flags are used to the unsolicted response handler is able to process
- * the ct command sent on the same port.
- **/
-static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi,
- uint16_t *txxri, uint16_t * rxxri)
+ * This function is responsible for responding to check and dispatch bsg diag
+ * command from the user to proper driver action routines.
+ */
+static int
+lpfc_bsg_diag_loopback_mode(struct fc_bsg_job *job)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ int rc;
+
+ shost = job->shost;
+ if (!shost)
+ return -ENODEV;
+ vport = (struct lpfc_vport *)job->shost->hostdata;
+ if (!vport)
+ return -ENODEV;
+ phba = vport->phba;
+ if (!phba)
+ return -ENODEV;
+
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job);
+ else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_IF_TYPE_2)
+ rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job);
+ else
+ rc = -ENODEV;
+
+ return rc;
+
+}
+
+/**
+ * lpfc_sli4_bsg_diag_mode_end - sli4 bsg vendor command for ending diag mode
+ * @job: LPFC_BSG_VENDOR_DIAG_MODE_END
+ *
+ * This function is responsible for responding to check and dispatch bsg diag
+ * command from the user to proper driver action routines.
+ */
+static int
+lpfc_sli4_bsg_diag_mode_end(struct fc_bsg_job *job)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ int rc;
+
+ shost = job->shost;
+ if (!shost)
+ return -ENODEV;
+ vport = (struct lpfc_vport *)job->shost->hostdata;
+ if (!vport)
+ return -ENODEV;
+ phba = vport->phba;
+ if (!phba)
+ return -ENODEV;
+
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ return -ENODEV;
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2)
+ return -ENODEV;
+
+ rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0);
+
+ if (!rc)
+ rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_bsg_link_diag_test - sli4 bsg vendor command for diag link test
+ * @job: LPFC_BSG_VENDOR_DIAG_LINK_TEST
+ *
+ * This function is to perform SLI4 diag link test request from the user
+ * applicaiton.
+ */
+static int
+lpfc_sli4_bsg_link_diag_test(struct fc_bsg_job *job)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ LPFC_MBOXQ_t *pmboxq;
+ struct sli4_link_diag *link_diag_test_cmd;
+ uint32_t req_len, alloc_len;
+ uint32_t timeout;
+ struct lpfc_mbx_run_link_diag_test *run_link_diag_test;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+ struct diag_status *diag_status_reply;
+ int mbxstatus, rc = 0;
+
+ shost = job->shost;
+ if (!shost) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+ vport = (struct lpfc_vport *)job->shost->hostdata;
+ if (!vport) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+ phba = vport->phba;
+ if (!phba) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+
+ if (job->request_len < sizeof(struct fc_bsg_request) +
+ sizeof(struct sli4_link_diag)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "3013 Received LINK DIAG TEST request "
+ " size:%d below the minimum size:%d\n",
+ job->request_len,
+ (int)(sizeof(struct fc_bsg_request) +
+ sizeof(struct sli4_link_diag)));
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ rc = lpfc_bsg_diag_mode_enter(phba, job);
+ if (rc)
+ goto job_error;
+
+ link_diag_test_cmd = (struct sli4_link_diag *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+ timeout = link_diag_test_cmd->timeout * 100;
+
+ rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1);
+
+ if (rc)
+ goto job_error;
+
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto link_diag_test_exit;
+ }
+
+ req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE,
+ req_len, LPFC_SLI4_MBX_EMBED);
+ if (alloc_len != req_len) {
+ rc = -ENOMEM;
+ goto link_diag_test_exit;
+ }
+ run_link_diag_test = &pmboxq->u.mqe.un.link_diag_test;
+ bf_set(lpfc_mbx_run_diag_test_link_num, &run_link_diag_test->u.req,
+ phba->sli4_hba.link_state.number);
+ bf_set(lpfc_mbx_run_diag_test_link_type, &run_link_diag_test->u.req,
+ phba->sli4_hba.link_state.type);
+ bf_set(lpfc_mbx_run_diag_test_test_id, &run_link_diag_test->u.req,
+ link_diag_test_cmd->test_id);
+ bf_set(lpfc_mbx_run_diag_test_loops, &run_link_diag_test->u.req,
+ link_diag_test_cmd->loops);
+ bf_set(lpfc_mbx_run_diag_test_test_ver, &run_link_diag_test->u.req,
+ link_diag_test_cmd->test_version);
+ bf_set(lpfc_mbx_run_diag_test_err_act, &run_link_diag_test->u.req,
+ link_diag_test_cmd->error_action);
+
+ mbxstatus = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &pmboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || mbxstatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "3010 Run link diag test mailbox failed with "
+ "mbx_status x%x status x%x, add_status x%x\n",
+ mbxstatus, shdr_status, shdr_add_status);
+ }
+
+ diag_status_reply = (struct diag_status *)
+ job->reply->reply_data.vendor_reply.vendor_rsp;
+
+ if (job->reply_len <
+ sizeof(struct fc_bsg_request) + sizeof(struct diag_status)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "3012 Received Run link diag test reply "
+ "below minimum size (%d): reply_len:%d\n",
+ (int)(sizeof(struct fc_bsg_request) +
+ sizeof(struct diag_status)),
+ job->reply_len);
+ rc = -EINVAL;
+ goto job_error;
+ }
+
+ diag_status_reply->mbox_status = mbxstatus;
+ diag_status_reply->shdr_status = shdr_status;
+ diag_status_reply->shdr_add_status = shdr_add_status;
+
+link_diag_test_exit:
+ rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0);
+
+ if (pmboxq)
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+
+ lpfc_bsg_diag_mode_exit(phba);
+
+job_error:
+ /* make error code available to userspace */
+ job->reply->result = rc;
+ /* complete the job back to userspace if no error */
+ if (rc == 0)
+ job->job_done(job);
+ return rc;
+}
+
+/**
+ * lpfcdiag_loop_self_reg - obtains a remote port login id
+ * @phba: Pointer to HBA context object
+ * @rpi: Pointer to a remote port login id
+ *
+ * This function obtains a remote port login id so the diag loopback test
+ * can send and receive its own unsolicited CT command.
+ **/
+static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi)
+{
+ LPFC_MBOXQ_t *mbox;
+ struct lpfc_dmabuf *dmabuff;
+ int status;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ *rpi = lpfc_sli4_alloc_rpi(phba);
+ status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID,
+ (uint8_t *)&phba->pport->fc_sparam, mbox, *rpi);
+ if (status) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_sli4_free_rpi(phba, *rpi);
+ return -ENOMEM;
+ }
+
+ dmabuff = (struct lpfc_dmabuf *) mbox->context1;
+ mbox->context1 = NULL;
+ mbox->context2 = NULL;
+ status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+
+ if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
+ lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
+ kfree(dmabuff);
+ if (status != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_sli4_free_rpi(phba, *rpi);
+ return -ENODEV;
+ }
+
+ *rpi = mbox->u.mb.un.varWords[0];
+
+ lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys);
+ kfree(dmabuff);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return 0;
+}
+
+/**
+ * lpfcdiag_loop_self_unreg - unregs from the rpi
+ * @phba: Pointer to HBA context object
+ * @rpi: Remote port login id
+ *
+ * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg
+ **/
+static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi)
+{
+ LPFC_MBOXQ_t *mbox;
+ int status;
+
+ /* Allocate mboxq structure */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (mbox == NULL)
+ return -ENOMEM;
+
+ lpfc_unreg_login(phba, 0, rpi, mbox);
+ status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+
+ if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) {
+ if (status != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_sli4_free_rpi(phba, rpi);
+ return 0;
+}
+
+/**
+ * lpfcdiag_loop_get_xri - obtains the transmit and receive ids
+ * @phba: Pointer to HBA context object
+ * @rpi: Remote port login id
+ * @txxri: Pointer to transmit exchange id
+ * @rxxri: Pointer to response exchabge id
+ *
+ * This function obtains the transmit and receive ids required to send
+ * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp
+ * flags are used to the unsolicted response handler is able to process
+ * the ct command sent on the same port.
+ **/
+static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi,
+ uint16_t *txxri, uint16_t * rxxri)
{
struct lpfc_bsg_event *evt;
struct lpfc_iocbq *cmdiocbq, *rspiocbq;
@@ -1857,6 +2303,86 @@ err_get_xri_exit:
}
/**
+ * lpfc_bsg_dma_page_alloc - allocate a bsg mbox page sized dma buffers
+ * @phba: Pointer to HBA context object
+ *
+ * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and.
+ * retruns the pointer to the buffer.
+ **/
+static struct lpfc_dmabuf *
+lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_dmabuf *dmabuf;
+ struct pci_dev *pcidev = phba->pcidev;
+
+ /* allocate dma buffer struct */
+ dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return NULL;
+
+ INIT_LIST_HEAD(&dmabuf->list);
+
+ /* now, allocate dma buffer */
+ dmabuf->virt = dma_alloc_coherent(&pcidev->dev, BSG_MBOX_SIZE,
+ &(dmabuf->phys), GFP_KERNEL);
+
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return NULL;
+ }
+ memset((uint8_t *)dmabuf->virt, 0, BSG_MBOX_SIZE);
+
+ return dmabuf;
+}
+
+/**
+ * lpfc_bsg_dma_page_free - free a bsg mbox page sized dma buffer
+ * @phba: Pointer to HBA context object.
+ * @dmabuf: Pointer to the bsg mbox page sized dma buffer descriptor.
+ *
+ * This routine just simply frees a dma buffer and its associated buffer
+ * descriptor referred by @dmabuf.
+ **/
+static void
+lpfc_bsg_dma_page_free(struct lpfc_hba *phba, struct lpfc_dmabuf *dmabuf)
+{
+ struct pci_dev *pcidev = phba->pcidev;
+
+ if (!dmabuf)
+ return;
+
+ if (dmabuf->virt)
+ dma_free_coherent(&pcidev->dev, BSG_MBOX_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return;
+}
+
+/**
+ * lpfc_bsg_dma_page_list_free - free a list of bsg mbox page sized dma buffers
+ * @phba: Pointer to HBA context object.
+ * @dmabuf_list: Pointer to a list of bsg mbox page sized dma buffer descs.
+ *
+ * This routine just simply frees all dma buffers and their associated buffer
+ * descriptors referred by @dmabuf_list.
+ **/
+static void
+lpfc_bsg_dma_page_list_free(struct lpfc_hba *phba,
+ struct list_head *dmabuf_list)
+{
+ struct lpfc_dmabuf *dmabuf, *next_dmabuf;
+
+ if (list_empty(dmabuf_list))
+ return;
+
+ list_for_each_entry_safe(dmabuf, next_dmabuf, dmabuf_list, list) {
+ list_del_init(&dmabuf->list);
+ lpfc_bsg_dma_page_free(phba, dmabuf);
+ }
+ return;
+}
+
+/**
* diag_cmd_data_alloc - fills in a bde struct with dma buffers
* @phba: Pointer to HBA context object
* @bpl: Pointer to 64 bit bde structure
@@ -2073,7 +2599,7 @@ err_post_rxbufs_exit:
}
/**
- * lpfc_bsg_diag_test - with a port in loopback issues a Ct cmd to itself
+ * lpfc_bsg_diag_loopback_run - run loopback on a port by issue ct cmd to itself
* @job: LPFC_BSG_VENDOR_DIAG_TEST fc_bsg_job
*
* This function receives a user data buffer to be transmitted and received on
@@ -2092,7 +2618,7 @@ err_post_rxbufs_exit:
* of loopback mode.
**/
static int
-lpfc_bsg_diag_test(struct fc_bsg_job *job)
+lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job)
{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -2417,7 +2943,7 @@ job_error:
}
/**
- * lpfc_bsg_wake_mbox_wait - lpfc_bsg_issue_mbox mbox completion handler
+ * lpfc_bsg_issue_mbox_cmpl - lpfc_bsg_issue_mbox mbox completion handler
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to mailbox command.
*
@@ -2428,15 +2954,13 @@ job_error:
* of the mailbox.
**/
void
-lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+lpfc_bsg_issue_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
struct bsg_job_data *dd_data;
struct fc_bsg_job *job;
- struct lpfc_mbx_nembed_cmd *nembed_sge;
uint32_t size;
unsigned long flags;
- uint8_t *to;
- uint8_t *from;
+ uint8_t *pmb, *pmb_buf;
spin_lock_irqsave(&phba->ct_ev_lock, flags);
dd_data = pmboxq->context1;
@@ -2446,62 +2970,21 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba
return;
}
- /* build the outgoing buffer to do an sg copy
- * the format is the response mailbox followed by any extended
- * mailbox data
+ /*
+ * The outgoing buffer is readily referred from the dma buffer,
+ * just need to get header part from mailboxq structure.
*/
- from = (uint8_t *)&pmboxq->u.mb;
- to = (uint8_t *)dd_data->context_un.mbox.mb;
- memcpy(to, from, sizeof(MAILBOX_t));
- if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) {
- /* copy the extended data if any, count is in words */
- if (dd_data->context_un.mbox.outExtWLen) {
- from = (uint8_t *)dd_data->context_un.mbox.ext;
- to += sizeof(MAILBOX_t);
- size = dd_data->context_un.mbox.outExtWLen *
- sizeof(uint32_t);
- memcpy(to, from, size);
- } else if (pmboxq->u.mb.mbxCommand == MBX_RUN_BIU_DIAG64) {
- from = (uint8_t *)dd_data->context_un.mbox.
- dmp->dma.virt;
- to += sizeof(MAILBOX_t);
- size = dd_data->context_un.mbox.dmp->size;
- memcpy(to, from, size);
- } else if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (pmboxq->u.mb.mbxCommand == MBX_DUMP_MEMORY)) {
- from = (uint8_t *)dd_data->context_un.mbox.dmp->dma.
- virt;
- to += sizeof(MAILBOX_t);
- size = pmboxq->u.mb.un.varWords[5];
- memcpy(to, from, size);
- } else if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) {
- nembed_sge = (struct lpfc_mbx_nembed_cmd *)
- &pmboxq->u.mb.un.varWords[0];
-
- from = (uint8_t *)dd_data->context_un.mbox.dmp->dma.
- virt;
- to += sizeof(MAILBOX_t);
- size = nembed_sge->sge[0].length;
- memcpy(to, from, size);
- } else if (pmboxq->u.mb.mbxCommand == MBX_READ_EVENT_LOG) {
- from = (uint8_t *)dd_data->context_un.
- mbox.dmp->dma.virt;
- to += sizeof(MAILBOX_t);
- size = dd_data->context_un.mbox.dmp->size;
- memcpy(to, from, size);
- }
- }
+ pmb = (uint8_t *)&pmboxq->u.mb;
+ pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb;
+ memcpy(pmb_buf, pmb, sizeof(MAILBOX_t));
- from = (uint8_t *)dd_data->context_un.mbox.mb;
job = dd_data->context_un.mbox.set_job;
if (job) {
size = job->reply_payload.payload_len;
job->reply->reply_payload_rcv_len =
sg_copy_from_buffer(job->reply_payload.sg_list,
- job->reply_payload.sg_cnt,
- from, size);
- job->reply->result = 0;
+ job->reply_payload.sg_cnt,
+ pmb_buf, size);
/* need to hold the lock until we set job->dd_data to NULL
* to hold off the timeout handler returning to the mid-layer
* while we are still processing the job.
@@ -2509,119 +2992,1110 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba
job->dd_data = NULL;
dd_data->context_un.mbox.set_job = NULL;
spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
- job->job_done(job);
} else {
dd_data->context_un.mbox.set_job = NULL;
spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
}
- kfree(dd_data->context_un.mbox.mb);
mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool);
- kfree(dd_data->context_un.mbox.ext);
- if (dd_data->context_un.mbox.dmp) {
- dma_free_coherent(&phba->pcidev->dev,
- dd_data->context_un.mbox.dmp->size,
- dd_data->context_un.mbox.dmp->dma.virt,
- dd_data->context_un.mbox.dmp->dma.phys);
- kfree(dd_data->context_un.mbox.dmp);
- }
- if (dd_data->context_un.mbox.rxbmp) {
- lpfc_mbuf_free(phba, dd_data->context_un.mbox.rxbmp->virt,
- dd_data->context_un.mbox.rxbmp->phys);
- kfree(dd_data->context_un.mbox.rxbmp);
- }
+ lpfc_bsg_dma_page_free(phba, dd_data->context_un.mbox.dmabuffers);
kfree(dd_data);
+
+ if (job) {
+ job->reply->result = 0;
+ job->job_done(job);
+ }
return;
}
/**
- * lpfc_bsg_check_cmd_access - test for a supported mailbox command
+ * lpfc_bsg_check_cmd_access - test for a supported mailbox command
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a mailbox object.
+ * @vport: Pointer to a vport object.
+ *
+ * Some commands require the port to be offline, some may not be called from
+ * the application.
+ **/
+static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba,
+ MAILBOX_t *mb, struct lpfc_vport *vport)
+{
+ /* return negative error values for bsg job */
+ switch (mb->mbxCommand) {
+ /* Offline only */
+ case MBX_INIT_LINK:
+ case MBX_DOWN_LINK:
+ case MBX_CONFIG_LINK:
+ case MBX_CONFIG_RING:
+ case MBX_RESET_RING:
+ case MBX_UNREG_LOGIN:
+ case MBX_CLEAR_LA:
+ case MBX_DUMP_CONTEXT:
+ case MBX_RUN_DIAGS:
+ case MBX_RESTART:
+ case MBX_SET_MASK:
+ if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2743 Command 0x%x is illegal in on-line "
+ "state\n",
+ mb->mbxCommand);
+ return -EPERM;
+ }
+ case MBX_WRITE_NV:
+ case MBX_WRITE_VPARMS:
+ case MBX_LOAD_SM:
+ case MBX_READ_NV:
+ case MBX_READ_CONFIG:
+ case MBX_READ_RCONFIG:
+ case MBX_READ_STATUS:
+ case MBX_READ_XRI:
+ case MBX_READ_REV:
+ case MBX_READ_LNK_STAT:
+ case MBX_DUMP_MEMORY:
+ case MBX_DOWN_LOAD:
+ case MBX_UPDATE_CFG:
+ case MBX_KILL_BOARD:
+ case MBX_LOAD_AREA:
+ case MBX_LOAD_EXP_ROM:
+ case MBX_BEACON:
+ case MBX_DEL_LD_ENTRY:
+ case MBX_SET_DEBUG:
+ case MBX_WRITE_WWN:
+ case MBX_SLI4_CONFIG:
+ case MBX_READ_EVENT_LOG:
+ case MBX_READ_EVENT_LOG_STATUS:
+ case MBX_WRITE_EVENT_LOG:
+ case MBX_PORT_CAPABILITIES:
+ case MBX_PORT_IOV_CONTROL:
+ case MBX_RUN_BIU_DIAG64:
+ break;
+ case MBX_SET_VARIABLE:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "1226 mbox: set_variable 0x%x, 0x%x\n",
+ mb->un.varWords[0],
+ mb->un.varWords[1]);
+ if ((mb->un.varWords[0] == SETVAR_MLOMNT)
+ && (mb->un.varWords[1] == 1)) {
+ phba->wait_4_mlo_maint_flg = 1;
+ } else if (mb->un.varWords[0] == SETVAR_MLORST) {
+ phba->link_flag &= ~LS_LOOPBACK_MODE;
+ phba->fc_topology = LPFC_TOPOLOGY_PT_PT;
+ }
+ break;
+ case MBX_READ_SPARM64:
+ case MBX_READ_TOPOLOGY:
+ case MBX_REG_LOGIN:
+ case MBX_REG_LOGIN64:
+ case MBX_CONFIG_PORT:
+ case MBX_RUN_BIU_DIAG:
+ default:
+ lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+ "2742 Unknown Command 0x%x\n",
+ mb->mbxCommand);
+ return -EPERM;
+ }
+
+ return 0; /* ok */
+}
+
+/**
+ * lpfc_bsg_mbox_ext_cleanup - clean up context of multi-buffer mbox session
+ * @phba: Pointer to HBA context object.
+ *
+ * This is routine clean up and reset BSG handling of multi-buffer mbox
+ * command session.
+ **/
+static void
+lpfc_bsg_mbox_ext_session_reset(struct lpfc_hba *phba)
+{
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE)
+ return;
+
+ /* free all memory, including dma buffers */
+ lpfc_bsg_dma_page_list_free(phba,
+ &phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+ lpfc_bsg_dma_page_free(phba, phba->mbox_ext_buf_ctx.mbx_dmabuf);
+ /* multi-buffer write mailbox command pass-through complete */
+ memset((char *)&phba->mbox_ext_buf_ctx, 0,
+ sizeof(struct lpfc_mbox_ext_buf_ctx));
+ INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+
+ return;
+}
+
+/**
+ * lpfc_bsg_issue_mbox_ext_handle_job - job handler for multi-buffer mbox cmpl
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to mailbox command.
+ *
+ * This is routine handles BSG job for mailbox commands completions with
+ * multiple external buffers.
+ **/
+static struct fc_bsg_job *
+lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+{
+ struct bsg_job_data *dd_data;
+ struct fc_bsg_job *job;
+ uint8_t *pmb, *pmb_buf;
+ unsigned long flags;
+ uint32_t size;
+ int rc = 0;
+
+ spin_lock_irqsave(&phba->ct_ev_lock, flags);
+ dd_data = pmboxq->context1;
+ /* has the job already timed out? */
+ if (!dd_data) {
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ job = NULL;
+ goto job_done_out;
+ }
+
+ /*
+ * The outgoing buffer is readily referred from the dma buffer,
+ * just need to get header part from mailboxq structure.
+ */
+ pmb = (uint8_t *)&pmboxq->u.mb;
+ pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb;
+ memcpy(pmb_buf, pmb, sizeof(MAILBOX_t));
+
+ job = dd_data->context_un.mbox.set_job;
+ if (job) {
+ size = job->reply_payload.payload_len;
+ job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ pmb_buf, size);
+ /* result for successful */
+ job->reply->result = 0;
+ job->dd_data = NULL;
+ /* need to hold the lock util we set job->dd_data to NULL
+ * to hold off the timeout handler from midlayer to take
+ * any action.
+ */
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2937 SLI_CONFIG ext-buffer maibox command "
+ "(x%x/x%x) complete bsg job done, bsize:%d\n",
+ phba->mbox_ext_buf_ctx.nembType,
+ phba->mbox_ext_buf_ctx.mboxType, size);
+ } else
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+
+job_done_out:
+ if (!job)
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2938 SLI_CONFIG ext-buffer maibox "
+ "command (x%x/x%x) failure, rc:x%x\n",
+ phba->mbox_ext_buf_ctx.nembType,
+ phba->mbox_ext_buf_ctx.mboxType, rc);
+ /* state change */
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_DONE;
+ kfree(dd_data);
+
+ return job;
+}
+
+/**
+ * lpfc_bsg_issue_read_mbox_ext_cmpl - compl handler for multi-buffer read mbox
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to mailbox command.
+ *
+ * This is completion handler function for mailbox read commands with multiple
+ * external buffers.
+ **/
+static void
+lpfc_bsg_issue_read_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+{
+ struct fc_bsg_job *job;
+
+ /* handle the BSG job with mailbox command */
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS)
+ pmboxq->u.mb.mbxStatus = MBXERR_ERROR;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2939 SLI_CONFIG ext-buffer rd maibox command "
+ "complete, ctxState:x%x, mbxStatus:x%x\n",
+ phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus);
+
+ job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq);
+
+ if (pmboxq->u.mb.mbxStatus || phba->mbox_ext_buf_ctx.numBuf == 1)
+ lpfc_bsg_mbox_ext_session_reset(phba);
+
+ /* free base driver mailbox structure memory */
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+
+ /* complete the bsg job if we have it */
+ if (job)
+ job->job_done(job);
+
+ return;
+}
+
+/**
+ * lpfc_bsg_issue_write_mbox_ext_cmpl - cmpl handler for multi-buffer write mbox
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to mailbox command.
+ *
+ * This is completion handler function for mailbox write commands with multiple
+ * external buffers.
+ **/
+static void
+lpfc_bsg_issue_write_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+{
+ struct fc_bsg_job *job;
+
+ /* handle the BSG job with the mailbox command */
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS)
+ pmboxq->u.mb.mbxStatus = MBXERR_ERROR;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2940 SLI_CONFIG ext-buffer wr maibox command "
+ "complete, ctxState:x%x, mbxStatus:x%x\n",
+ phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus);
+
+ job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq);
+
+ /* free all memory, including dma buffers */
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ lpfc_bsg_mbox_ext_session_reset(phba);
+
+ /* complete the bsg job if we have it */
+ if (job)
+ job->job_done(job);
+
+ return;
+}
+
+static void
+lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp,
+ uint32_t index, struct lpfc_dmabuf *mbx_dmabuf,
+ struct lpfc_dmabuf *ext_dmabuf)
+{
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+
+ /* pointer to the start of mailbox command */
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)mbx_dmabuf->virt;
+
+ if (nemb_tp == nemb_mse) {
+ if (index == 0) {
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_hi =
+ putPaddrHigh(mbx_dmabuf->phys +
+ sizeof(MAILBOX_t));
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_lo =
+ putPaddrLow(mbx_dmabuf->phys +
+ sizeof(MAILBOX_t));
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2943 SLI_CONFIG(mse)[%d], "
+ "bufLen:%d, addrHi:x%x, addrLo:x%x\n",
+ index,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].buf_len,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_hi,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_lo);
+ } else {
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_hi =
+ putPaddrHigh(ext_dmabuf->phys);
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_lo =
+ putPaddrLow(ext_dmabuf->phys);
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2944 SLI_CONFIG(mse)[%d], "
+ "bufLen:%d, addrHi:x%x, addrLo:x%x\n",
+ index,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].buf_len,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_hi,
+ sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[index].pa_lo);
+ }
+ } else {
+ if (index == 0) {
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_hi =
+ putPaddrHigh(mbx_dmabuf->phys +
+ sizeof(MAILBOX_t));
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_lo =
+ putPaddrLow(mbx_dmabuf->phys +
+ sizeof(MAILBOX_t));
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "3007 SLI_CONFIG(hbd)[%d], "
+ "bufLen:%d, addrHi:x%x, addrLo:x%x\n",
+ index,
+ bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len,
+ &sli_cfg_mbx->un.
+ sli_config_emb1_subsys.hbd[index]),
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_hi,
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_lo);
+
+ } else {
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_hi =
+ putPaddrHigh(ext_dmabuf->phys);
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_lo =
+ putPaddrLow(ext_dmabuf->phys);
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "3008 SLI_CONFIG(hbd)[%d], "
+ "bufLen:%d, addrHi:x%x, addrLo:x%x\n",
+ index,
+ bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len,
+ &sli_cfg_mbx->un.
+ sli_config_emb1_subsys.hbd[index]),
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_hi,
+ sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[index].pa_lo);
+ }
+ }
+ return;
+}
+
+/**
+ * lpfc_bsg_sli_cfg_mse_read_cmd_ext - sli_config non-embedded mailbox cmd read
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a BSG mailbox object.
+ * @nemb_tp: Enumerate of non-embedded mailbox command type.
+ * @dmabuff: Pointer to a DMA buffer descriptor.
+ *
+ * This routine performs SLI_CONFIG (0x9B) read mailbox command operation with
+ * non-embedded external bufffers.
+ **/
+static int
+lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ enum nemb_type nemb_tp,
+ struct lpfc_dmabuf *dmabuf)
+{
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+ struct dfc_mbox_req *mbox_req;
+ struct lpfc_dmabuf *curr_dmabuf, *next_dmabuf;
+ uint32_t ext_buf_cnt, ext_buf_index;
+ struct lpfc_dmabuf *ext_dmabuf = NULL;
+ struct bsg_job_data *dd_data = NULL;
+ LPFC_MBOXQ_t *pmboxq = NULL;
+ MAILBOX_t *pmb;
+ uint8_t *pmbx;
+ int rc, i;
+
+ mbox_req =
+ (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
+
+ /* pointer to the start of mailbox command */
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt;
+
+ if (nemb_tp == nemb_mse) {
+ ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr);
+ if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2945 Handled SLI_CONFIG(mse) rd, "
+ "ext_buf_cnt(%d) out of range(%d)\n",
+ ext_buf_cnt,
+ LPFC_MBX_SLI_CONFIG_MAX_MSE);
+ rc = -ERANGE;
+ goto job_error;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2941 Handled SLI_CONFIG(mse) rd, "
+ "ext_buf_cnt:%d\n", ext_buf_cnt);
+ } else {
+ /* sanity check on interface type for support */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2) {
+ rc = -ENODEV;
+ goto job_error;
+ }
+ /* nemb_tp == nemb_hbd */
+ ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count;
+ if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2946 Handled SLI_CONFIG(hbd) rd, "
+ "ext_buf_cnt(%d) out of range(%d)\n",
+ ext_buf_cnt,
+ LPFC_MBX_SLI_CONFIG_MAX_HBD);
+ rc = -ERANGE;
+ goto job_error;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2942 Handled SLI_CONFIG(hbd) rd, "
+ "ext_buf_cnt:%d\n", ext_buf_cnt);
+ }
+
+ /* reject non-embedded mailbox command with none external buffer */
+ if (ext_buf_cnt == 0) {
+ rc = -EPERM;
+ goto job_error;
+ } else if (ext_buf_cnt > 1) {
+ /* additional external read buffers */
+ for (i = 1; i < ext_buf_cnt; i++) {
+ ext_dmabuf = lpfc_bsg_dma_page_alloc(phba);
+ if (!ext_dmabuf) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+ list_add_tail(&ext_dmabuf->list,
+ &phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+ }
+ }
+
+ /* bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+
+ /* mailbox command structure for base driver */
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+
+ /* for the first external buffer */
+ lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf);
+
+ /* for the rest of external buffer descriptors if any */
+ if (ext_buf_cnt > 1) {
+ ext_buf_index = 1;
+ list_for_each_entry_safe(curr_dmabuf, next_dmabuf,
+ &phba->mbox_ext_buf_ctx.ext_dmabuf_list, list) {
+ lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp,
+ ext_buf_index, dmabuf,
+ curr_dmabuf);
+ ext_buf_index++;
+ }
+ }
+
+ /* construct base driver mbox command */
+ pmb = &pmboxq->u.mb;
+ pmbx = (uint8_t *)dmabuf->virt;
+ memcpy(pmb, pmbx, sizeof(*pmb));
+ pmb->mbxOwner = OWN_HOST;
+ pmboxq->vport = phba->pport;
+
+ /* multi-buffer handling context */
+ phba->mbox_ext_buf_ctx.nembType = nemb_tp;
+ phba->mbox_ext_buf_ctx.mboxType = mbox_rd;
+ phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt;
+ phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag;
+ phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum;
+ phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf;
+
+ /* callback for multi-buffer read mailbox command */
+ pmboxq->mbox_cmpl = lpfc_bsg_issue_read_mbox_ext_cmpl;
+
+ /* context fields to callback function */
+ pmboxq->context1 = dd_data;
+ dd_data->type = TYPE_MBOX;
+ dd_data->context_un.mbox.pmboxq = pmboxq;
+ dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx;
+ dd_data->context_un.mbox.set_job = job;
+ job->dd_data = dd_data;
+
+ /* state change */
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT;
+
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2947 Issued SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ return 1;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2948 Failed to issue SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ rc = -EPIPE;
+
+job_error:
+ if (pmboxq)
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ lpfc_bsg_dma_page_list_free(phba,
+ &phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+ kfree(dd_data);
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE;
+ return rc;
+}
+
+/**
+ * lpfc_bsg_sli_cfg_write_cmd_ext - sli_config non-embedded mailbox cmd write
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a BSG mailbox object.
+ * @dmabuff: Pointer to a DMA buffer descriptor.
+ *
+ * This routine performs SLI_CONFIG (0x9B) write mailbox command operation with
+ * non-embedded external bufffers.
+ **/
+static int
+lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ enum nemb_type nemb_tp,
+ struct lpfc_dmabuf *dmabuf)
+{
+ struct dfc_mbox_req *mbox_req;
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+ uint32_t ext_buf_cnt;
+ struct bsg_job_data *dd_data = NULL;
+ LPFC_MBOXQ_t *pmboxq = NULL;
+ MAILBOX_t *pmb;
+ uint8_t *mbx;
+ int rc = 0, i;
+
+ mbox_req =
+ (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
+
+ /* pointer to the start of mailbox command */
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt;
+
+ if (nemb_tp == nemb_mse) {
+ ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr);
+ if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2953 Handled SLI_CONFIG(mse) wr, "
+ "ext_buf_cnt(%d) out of range(%d)\n",
+ ext_buf_cnt,
+ LPFC_MBX_SLI_CONFIG_MAX_MSE);
+ return -ERANGE;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2949 Handled SLI_CONFIG(mse) wr, "
+ "ext_buf_cnt:%d\n", ext_buf_cnt);
+ } else {
+ /* sanity check on interface type for support */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2)
+ return -ENODEV;
+ /* nemb_tp == nemb_hbd */
+ ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count;
+ if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2954 Handled SLI_CONFIG(hbd) wr, "
+ "ext_buf_cnt(%d) out of range(%d)\n",
+ ext_buf_cnt,
+ LPFC_MBX_SLI_CONFIG_MAX_HBD);
+ return -ERANGE;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2950 Handled SLI_CONFIG(hbd) wr, "
+ "ext_buf_cnt:%d\n", ext_buf_cnt);
+ }
+
+ if (ext_buf_cnt == 0)
+ return -EPERM;
+
+ /* for the first external buffer */
+ lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf);
+
+ /* log for looking forward */
+ for (i = 1; i < ext_buf_cnt; i++) {
+ if (nemb_tp == nemb_mse)
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2951 SLI_CONFIG(mse), buf[%d]-length:%d\n",
+ i, sli_cfg_mbx->un.sli_config_emb0_subsys.
+ mse[i].buf_len);
+ else
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2952 SLI_CONFIG(hbd), buf[%d]-length:%d\n",
+ i, bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len,
+ &sli_cfg_mbx->un.sli_config_emb1_subsys.
+ hbd[i]));
+ }
+
+ /* multi-buffer handling context */
+ phba->mbox_ext_buf_ctx.nembType = nemb_tp;
+ phba->mbox_ext_buf_ctx.mboxType = mbox_wr;
+ phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt;
+ phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag;
+ phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum;
+ phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf;
+
+ if (ext_buf_cnt == 1) {
+ /* bsg tracking structure */
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+
+ /* mailbox command structure for base driver */
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ pmb = &pmboxq->u.mb;
+ mbx = (uint8_t *)dmabuf->virt;
+ memcpy(pmb, mbx, sizeof(*pmb));
+ pmb->mbxOwner = OWN_HOST;
+ pmboxq->vport = phba->pport;
+
+ /* callback for multi-buffer read mailbox command */
+ pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl;
+
+ /* context fields to callback function */
+ pmboxq->context1 = dd_data;
+ dd_data->type = TYPE_MBOX;
+ dd_data->context_un.mbox.pmboxq = pmboxq;
+ dd_data->context_un.mbox.mb = (MAILBOX_t *)mbx;
+ dd_data->context_un.mbox.set_job = job;
+ job->dd_data = dd_data;
+
+ /* state change */
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT;
+
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2955 Issued SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ return 1;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2956 Failed to issue SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ rc = -EPIPE;
+ }
+
+job_error:
+ if (pmboxq)
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ kfree(dd_data);
+
+ return rc;
+}
+
+/**
+ * lpfc_bsg_handle_sli_cfg_mbox - handle sli-cfg mailbox cmd with ext buffer
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a BSG mailbox object.
+ * @dmabuff: Pointer to a DMA buffer descriptor.
+ *
+ * This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded
+ * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B
+ * with embedded sussystem 0x1 and opcodes with external HBDs.
+ **/
+static int
+lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ struct lpfc_dmabuf *dmabuf)
+{
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+ uint32_t subsys;
+ uint32_t opcode;
+ int rc = SLI_CONFIG_NOT_HANDLED;
+
+ /* state change */
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_HOST;
+
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt;
+
+ if (!bsg_bf_get(lpfc_mbox_hdr_emb,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) {
+ subsys = bsg_bf_get(lpfc_emb0_subcmnd_subsys,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys);
+ opcode = bsg_bf_get(lpfc_emb0_subcmnd_opcode,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys);
+ if (subsys == SLI_CONFIG_SUBSYS_FCOE) {
+ switch (opcode) {
+ case FCOE_OPCODE_READ_FCF:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2957 Handled SLI_CONFIG "
+ "subsys_fcoe, opcode:x%x\n",
+ opcode);
+ rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job,
+ nemb_mse, dmabuf);
+ break;
+ case FCOE_OPCODE_ADD_FCF:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2958 Handled SLI_CONFIG "
+ "subsys_fcoe, opcode:x%x\n",
+ opcode);
+ rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job,
+ nemb_mse, dmabuf);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2959 Not handled SLI_CONFIG "
+ "subsys_fcoe, opcode:x%x\n",
+ opcode);
+ rc = SLI_CONFIG_NOT_HANDLED;
+ break;
+ }
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2977 Handled SLI_CONFIG "
+ "subsys:x%d, opcode:x%x\n",
+ subsys, opcode);
+ rc = SLI_CONFIG_NOT_HANDLED;
+ }
+ } else {
+ subsys = bsg_bf_get(lpfc_emb1_subcmnd_subsys,
+ &sli_cfg_mbx->un.sli_config_emb1_subsys);
+ opcode = bsg_bf_get(lpfc_emb1_subcmnd_opcode,
+ &sli_cfg_mbx->un.sli_config_emb1_subsys);
+ if (subsys == SLI_CONFIG_SUBSYS_COMN) {
+ switch (opcode) {
+ case COMN_OPCODE_READ_OBJECT:
+ case COMN_OPCODE_READ_OBJECT_LIST:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2960 Handled SLI_CONFIG "
+ "subsys_comn, opcode:x%x\n",
+ opcode);
+ rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job,
+ nemb_hbd, dmabuf);
+ break;
+ case COMN_OPCODE_WRITE_OBJECT:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2961 Handled SLI_CONFIG "
+ "subsys_comn, opcode:x%x\n",
+ opcode);
+ rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job,
+ nemb_hbd, dmabuf);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2962 Not handled SLI_CONFIG "
+ "subsys_comn, opcode:x%x\n",
+ opcode);
+ rc = SLI_CONFIG_NOT_HANDLED;
+ break;
+ }
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2978 Handled SLI_CONFIG "
+ "subsys:x%d, opcode:x%x\n",
+ subsys, opcode);
+ rc = SLI_CONFIG_NOT_HANDLED;
+ }
+ }
+ return rc;
+}
+
+/**
+ * lpfc_bsg_mbox_ext_abort_req - request to abort mbox command with ext buffers
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine is for requesting to abort a pass-through mailbox command with
+ * multiple external buffers due to error condition.
+ **/
+static void
+lpfc_bsg_mbox_ext_abort(struct lpfc_hba *phba)
+{
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT)
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS;
+ else
+ lpfc_bsg_mbox_ext_session_reset(phba);
+ return;
+}
+
+/**
+ * lpfc_bsg_read_ebuf_get - get the next mailbox read external buffer
+ * @phba: Pointer to HBA context object.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
+ *
+ * This routine extracts the next mailbox read external buffer back to
+ * user space through BSG.
+ **/
+static int
+lpfc_bsg_read_ebuf_get(struct lpfc_hba *phba, struct fc_bsg_job *job)
+{
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+ struct lpfc_dmabuf *dmabuf;
+ uint8_t *pbuf;
+ uint32_t size;
+ uint32_t index;
+
+ index = phba->mbox_ext_buf_ctx.seqNum;
+ phba->mbox_ext_buf_ctx.seqNum++;
+
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)
+ phba->mbox_ext_buf_ctx.mbx_dmabuf->virt;
+
+ if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) {
+ size = bsg_bf_get(lpfc_mbox_sli_config_mse_len,
+ &sli_cfg_mbx->un.sli_config_emb0_subsys.mse[index]);
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2963 SLI_CONFIG (mse) ext-buffer rd get "
+ "buffer[%d], size:%d\n", index, size);
+ } else {
+ size = bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len,
+ &sli_cfg_mbx->un.sli_config_emb1_subsys.hbd[index]);
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2964 SLI_CONFIG (hbd) ext-buffer rd get "
+ "buffer[%d], size:%d\n", index, size);
+ }
+ if (list_empty(&phba->mbox_ext_buf_ctx.ext_dmabuf_list))
+ return -EPIPE;
+ dmabuf = list_first_entry(&phba->mbox_ext_buf_ctx.ext_dmabuf_list,
+ struct lpfc_dmabuf, list);
+ list_del_init(&dmabuf->list);
+ pbuf = (uint8_t *)dmabuf->virt;
+ job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ pbuf, size);
+
+ lpfc_bsg_dma_page_free(phba, dmabuf);
+
+ if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2965 SLI_CONFIG (hbd) ext-buffer rd mbox "
+ "command session done\n");
+ lpfc_bsg_mbox_ext_session_reset(phba);
+ }
+
+ job->reply->result = 0;
+ job->job_done(job);
+
+ return SLI_CONFIG_HANDLED;
+}
+
+/**
+ * lpfc_bsg_write_ebuf_set - set the next mailbox write external buffer
+ * @phba: Pointer to HBA context object.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
+ *
+ * This routine sets up the next mailbox read external buffer obtained
+ * from user space through BSG.
+ **/
+static int
+lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ struct lpfc_dmabuf *dmabuf)
+{
+ struct lpfc_sli_config_mbox *sli_cfg_mbx;
+ struct bsg_job_data *dd_data = NULL;
+ LPFC_MBOXQ_t *pmboxq = NULL;
+ MAILBOX_t *pmb;
+ enum nemb_type nemb_tp;
+ uint8_t *pbuf;
+ uint32_t size;
+ uint32_t index;
+ int rc;
+
+ index = phba->mbox_ext_buf_ctx.seqNum;
+ phba->mbox_ext_buf_ctx.seqNum++;
+ nemb_tp = phba->mbox_ext_buf_ctx.nembType;
+
+ sli_cfg_mbx = (struct lpfc_sli_config_mbox *)
+ phba->mbox_ext_buf_ctx.mbx_dmabuf->virt;
+
+ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
+ if (!dd_data) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+
+ pbuf = (uint8_t *)dmabuf->virt;
+ size = job->request_payload.payload_len;
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ pbuf, size);
+
+ if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2966 SLI_CONFIG (mse) ext-buffer wr set "
+ "buffer[%d], size:%d\n",
+ phba->mbox_ext_buf_ctx.seqNum, size);
+
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2967 SLI_CONFIG (hbd) ext-buffer wr set "
+ "buffer[%d], size:%d\n",
+ phba->mbox_ext_buf_ctx.seqNum, size);
+
+ }
+
+ /* set up external buffer descriptor and add to external buffer list */
+ lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, index,
+ phba->mbox_ext_buf_ctx.mbx_dmabuf,
+ dmabuf);
+ list_add_tail(&dmabuf->list, &phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+
+ if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2968 SLI_CONFIG ext-buffer wr all %d "
+ "ebuffers received\n",
+ phba->mbox_ext_buf_ctx.numBuf);
+ /* mailbox command structure for base driver */
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq) {
+ rc = -ENOMEM;
+ goto job_error;
+ }
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ pbuf = (uint8_t *)phba->mbox_ext_buf_ctx.mbx_dmabuf->virt;
+ pmb = &pmboxq->u.mb;
+ memcpy(pmb, pbuf, sizeof(*pmb));
+ pmb->mbxOwner = OWN_HOST;
+ pmboxq->vport = phba->pport;
+
+ /* callback for multi-buffer write mailbox command */
+ pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl;
+
+ /* context fields to callback function */
+ pmboxq->context1 = dd_data;
+ dd_data->type = TYPE_MBOX;
+ dd_data->context_un.mbox.pmboxq = pmboxq;
+ dd_data->context_un.mbox.mb = (MAILBOX_t *)pbuf;
+ dd_data->context_un.mbox.set_job = job;
+ job->dd_data = dd_data;
+
+ /* state change */
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT;
+
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2969 Issued SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ return 1;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2970 Failed to issue SLI_CONFIG ext-buffer "
+ "maibox command, rc:x%x\n", rc);
+ rc = -EPIPE;
+ goto job_error;
+ }
+
+ /* wait for additoinal external buffers */
+ job->reply->result = 0;
+ job->job_done(job);
+ return SLI_CONFIG_HANDLED;
+
+job_error:
+ lpfc_bsg_dma_page_free(phba, dmabuf);
+ kfree(dd_data);
+
+ return rc;
+}
+
+/**
+ * lpfc_bsg_handle_sli_cfg_ebuf - handle ext buffer with sli-cfg mailbox cmd
+ * @phba: Pointer to HBA context object.
+ * @mb: Pointer to a BSG mailbox object.
+ * @dmabuff: Pointer to a DMA buffer descriptor.
+ *
+ * This routine handles the external buffer with SLI_CONFIG (0x9B) mailbox
+ * command with multiple non-embedded external buffers.
+ **/
+static int
+lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ struct lpfc_dmabuf *dmabuf)
+{
+ int rc;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2971 SLI_CONFIG buffer (type:x%x)\n",
+ phba->mbox_ext_buf_ctx.mboxType);
+
+ if (phba->mbox_ext_buf_ctx.mboxType == mbox_rd) {
+ if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_DONE) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2972 SLI_CONFIG rd buffer state "
+ "mismatch:x%x\n",
+ phba->mbox_ext_buf_ctx.state);
+ lpfc_bsg_mbox_ext_abort(phba);
+ return -EPIPE;
+ }
+ rc = lpfc_bsg_read_ebuf_get(phba, job);
+ if (rc == SLI_CONFIG_HANDLED)
+ lpfc_bsg_dma_page_free(phba, dmabuf);
+ } else { /* phba->mbox_ext_buf_ctx.mboxType == mbox_wr */
+ if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_HOST) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2973 SLI_CONFIG wr buffer state "
+ "mismatch:x%x\n",
+ phba->mbox_ext_buf_ctx.state);
+ lpfc_bsg_mbox_ext_abort(phba);
+ return -EPIPE;
+ }
+ rc = lpfc_bsg_write_ebuf_set(phba, job, dmabuf);
+ }
+ return rc;
+}
+
+/**
+ * lpfc_bsg_handle_sli_cfg_ext - handle sli-cfg mailbox with external buffer
* @phba: Pointer to HBA context object.
- * @mb: Pointer to a mailbox object.
- * @vport: Pointer to a vport object.
+ * @mb: Pointer to a BSG mailbox object.
+ * @dmabuff: Pointer to a DMA buffer descriptor.
*
- * Some commands require the port to be offline, some may not be called from
- * the application.
+ * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG
+ * (0x9B) mailbox commands and external buffers.
**/
-static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba,
- MAILBOX_t *mb, struct lpfc_vport *vport)
+static int
+lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
+ struct lpfc_dmabuf *dmabuf)
{
- /* return negative error values for bsg job */
- switch (mb->mbxCommand) {
- /* Offline only */
- case MBX_INIT_LINK:
- case MBX_DOWN_LINK:
- case MBX_CONFIG_LINK:
- case MBX_CONFIG_RING:
- case MBX_RESET_RING:
- case MBX_UNREG_LOGIN:
- case MBX_CLEAR_LA:
- case MBX_DUMP_CONTEXT:
- case MBX_RUN_DIAGS:
- case MBX_RESTART:
- case MBX_SET_MASK:
- if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
- "2743 Command 0x%x is illegal in on-line "
- "state\n",
- mb->mbxCommand);
- return -EPERM;
- }
- case MBX_WRITE_NV:
- case MBX_WRITE_VPARMS:
- case MBX_LOAD_SM:
- case MBX_READ_NV:
- case MBX_READ_CONFIG:
- case MBX_READ_RCONFIG:
- case MBX_READ_STATUS:
- case MBX_READ_XRI:
- case MBX_READ_REV:
- case MBX_READ_LNK_STAT:
- case MBX_DUMP_MEMORY:
- case MBX_DOWN_LOAD:
- case MBX_UPDATE_CFG:
- case MBX_KILL_BOARD:
- case MBX_LOAD_AREA:
- case MBX_LOAD_EXP_ROM:
- case MBX_BEACON:
- case MBX_DEL_LD_ENTRY:
- case MBX_SET_DEBUG:
- case MBX_WRITE_WWN:
- case MBX_SLI4_CONFIG:
- case MBX_READ_EVENT_LOG:
- case MBX_READ_EVENT_LOG_STATUS:
- case MBX_WRITE_EVENT_LOG:
- case MBX_PORT_CAPABILITIES:
- case MBX_PORT_IOV_CONTROL:
- case MBX_RUN_BIU_DIAG64:
- break;
- case MBX_SET_VARIABLE:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "1226 mbox: set_variable 0x%x, 0x%x\n",
- mb->un.varWords[0],
- mb->un.varWords[1]);
- if ((mb->un.varWords[0] == SETVAR_MLOMNT)
- && (mb->un.varWords[1] == 1)) {
- phba->wait_4_mlo_maint_flg = 1;
- } else if (mb->un.varWords[0] == SETVAR_MLORST) {
- phba->link_flag &= ~LS_LOOPBACK_MODE;
- phba->fc_topology = LPFC_TOPOLOGY_PT_PT;
- }
- break;
- case MBX_READ_SPARM64:
- case MBX_READ_TOPOLOGY:
- case MBX_REG_LOGIN:
- case MBX_REG_LOGIN64:
- case MBX_CONFIG_PORT:
- case MBX_RUN_BIU_DIAG:
- default:
- lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
- "2742 Unknown Command 0x%x\n",
- mb->mbxCommand);
- return -EPERM;
+ struct dfc_mbox_req *mbox_req;
+ int rc;
+
+ mbox_req =
+ (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
+
+ /* mbox command with/without single external buffer */
+ if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0)
+ return SLI_CONFIG_NOT_HANDLED;
+
+ /* mbox command and first external buffer */
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) {
+ if (mbox_req->extSeqNum == 1) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2974 SLI_CONFIG mailbox: tag:%d, "
+ "seq:%d\n", mbox_req->extMboxTag,
+ mbox_req->extSeqNum);
+ rc = lpfc_bsg_handle_sli_cfg_mbox(phba, job, dmabuf);
+ return rc;
+ } else
+ goto sli_cfg_ext_error;
}
- return 0; /* ok */
+ /*
+ * handle additional external buffers
+ */
+
+ /* check broken pipe conditions */
+ if (mbox_req->extMboxTag != phba->mbox_ext_buf_ctx.mbxTag)
+ goto sli_cfg_ext_error;
+ if (mbox_req->extSeqNum > phba->mbox_ext_buf_ctx.numBuf)
+ goto sli_cfg_ext_error;
+ if (mbox_req->extSeqNum != phba->mbox_ext_buf_ctx.seqNum + 1)
+ goto sli_cfg_ext_error;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2975 SLI_CONFIG mailbox external buffer: "
+ "extSta:x%x, tag:%d, seq:%d\n",
+ phba->mbox_ext_buf_ctx.state, mbox_req->extMboxTag,
+ mbox_req->extSeqNum);
+ rc = lpfc_bsg_handle_sli_cfg_ebuf(phba, job, dmabuf);
+ return rc;
+
+sli_cfg_ext_error:
+ /* all other cases, broken pipe */
+ lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+ "2976 SLI_CONFIG mailbox broken pipe: "
+ "ctxSta:x%x, ctxNumBuf:%d "
+ "ctxTag:%d, ctxSeq:%d, tag:%d, seq:%d\n",
+ phba->mbox_ext_buf_ctx.state,
+ phba->mbox_ext_buf_ctx.numBuf,
+ phba->mbox_ext_buf_ctx.mbxTag,
+ phba->mbox_ext_buf_ctx.seqNum,
+ mbox_req->extMboxTag, mbox_req->extSeqNum);
+
+ lpfc_bsg_mbox_ext_session_reset(phba);
+
+ return -EPIPE;
}
/**
@@ -2644,22 +4118,21 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
LPFC_MBOXQ_t *pmboxq = NULL; /* internal mailbox queue */
MAILBOX_t *pmb; /* shortcut to the pmboxq mailbox */
/* a 4k buffer to hold the mb and extended data from/to the bsg */
- MAILBOX_t *mb = NULL;
+ uint8_t *pmbx = NULL;
struct bsg_job_data *dd_data = NULL; /* bsg data tracking structure */
- uint32_t size;
- struct lpfc_dmabuf *rxbmp = NULL; /* for biu diag */
- struct lpfc_dmabufext *dmp = NULL; /* for biu diag */
- struct ulp_bde64 *rxbpl = NULL;
- struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *)
- job->request->rqst_data.h_vendor.vendor_cmd;
+ struct lpfc_dmabuf *dmabuf = NULL;
+ struct dfc_mbox_req *mbox_req;
struct READ_EVENT_LOG_VAR *rdEventLog;
uint32_t transmit_length, receive_length, mode;
+ struct lpfc_mbx_sli4_config *sli4_config;
struct lpfc_mbx_nembed_cmd *nembed_sge;
struct mbox_header *header;
struct ulp_bde64 *bde;
uint8_t *ext = NULL;
int rc = 0;
uint8_t *from;
+ uint32_t size;
+
/* in case no data is transferred */
job->reply->reply_payload_rcv_len = 0;
@@ -2671,6 +4144,18 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
goto job_done;
}
+ /*
+ * Don't allow mailbox commands to be sent when blocked or when in
+ * the middle of discovery
+ */
+ if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
+ rc = -EAGAIN;
+ goto job_done;
+ }
+
+ mbox_req =
+ (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
+
/* check if requested extended data lengths are valid */
if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) ||
(mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) {
@@ -2678,6 +4163,32 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
goto job_done;
}
+ dmabuf = lpfc_bsg_dma_page_alloc(phba);
+ if (!dmabuf || !dmabuf->virt) {
+ rc = -ENOMEM;
+ goto job_done;
+ }
+
+ /* Get the mailbox command or external buffer from BSG */
+ pmbx = (uint8_t *)dmabuf->virt;
+ size = job->request_payload.payload_len;
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt, pmbx, size);
+
+ /* Handle possible SLI_CONFIG with non-embedded payloads */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_bsg_handle_sli_cfg_ext(phba, job, dmabuf);
+ if (rc == SLI_CONFIG_HANDLED)
+ goto job_cont;
+ if (rc)
+ goto job_done;
+ /* SLI_CONFIG_NOT_HANDLED for other mailbox commands */
+ }
+
+ rc = lpfc_bsg_check_cmd_access(phba, (MAILBOX_t *)pmbx, vport);
+ if (rc != 0)
+ goto job_done; /* must be negative */
+
/* allocate our bsg tracking structure */
dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
if (!dd_data) {
@@ -2687,12 +4198,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
goto job_done;
}
- mb = kzalloc(BSG_MBOX_SIZE, GFP_KERNEL);
- if (!mb) {
- rc = -ENOMEM;
- goto job_done;
- }
-
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmboxq) {
rc = -ENOMEM;
@@ -2700,17 +4205,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
}
memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
- size = job->request_payload.payload_len;
- sg_copy_to_buffer(job->request_payload.sg_list,
- job->request_payload.sg_cnt,
- mb, size);
-
- rc = lpfc_bsg_check_cmd_access(phba, mb, vport);
- if (rc != 0)
- goto job_done; /* must be negative */
-
pmb = &pmboxq->u.mb;
- memcpy(pmb, mb, sizeof(*pmb));
+ memcpy(pmb, pmbx, sizeof(*pmb));
pmb->mbxOwner = OWN_HOST;
pmboxq->vport = vport;
@@ -2727,30 +4223,13 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
"0x%x while in stopped state.\n",
pmb->mbxCommand);
- /* Don't allow mailbox commands to be sent when blocked
- * or when in the middle of discovery
- */
- if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
- rc = -EAGAIN;
- goto job_done;
- }
-
/* extended mailbox commands will need an extended buffer */
if (mbox_req->inExtWLen || mbox_req->outExtWLen) {
- ext = kzalloc(MAILBOX_EXT_SIZE, GFP_KERNEL);
- if (!ext) {
- rc = -ENOMEM;
- goto job_done;
- }
-
/* any data for the device? */
if (mbox_req->inExtWLen) {
- from = (uint8_t *)mb;
- from += sizeof(MAILBOX_t);
- memcpy((uint8_t *)ext, from,
- mbox_req->inExtWLen * sizeof(uint32_t));
+ from = pmbx;
+ ext = from + sizeof(MAILBOX_t);
}
-
pmboxq->context2 = ext;
pmboxq->in_ext_byte_len =
mbox_req->inExtWLen * sizeof(uint32_t);
@@ -2774,46 +4253,17 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
rc = -ERANGE;
goto job_done;
}
-
- rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!rxbmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
- if (!rxbmp->virt) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&rxbmp->list);
- rxbpl = (struct ulp_bde64 *) rxbmp->virt;
- dmp = diag_cmd_data_alloc(phba, rxbpl, transmit_length, 0);
- if (!dmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&dmp->dma.list);
pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh =
- putPaddrHigh(dmp->dma.phys);
+ putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t));
pmb->un.varBIUdiag.un.s2.xmit_bde64.addrLow =
- putPaddrLow(dmp->dma.phys);
+ putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t));
pmb->un.varBIUdiag.un.s2.rcv_bde64.addrHigh =
- putPaddrHigh(dmp->dma.phys +
- pmb->un.varBIUdiag.un.s2.
- xmit_bde64.tus.f.bdeSize);
+ putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t)
+ + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize);
pmb->un.varBIUdiag.un.s2.rcv_bde64.addrLow =
- putPaddrLow(dmp->dma.phys +
- pmb->un.varBIUdiag.un.s2.
- xmit_bde64.tus.f.bdeSize);
-
- /* copy the transmit data found in the mailbox extension area */
- from = (uint8_t *)mb;
- from += sizeof(MAILBOX_t);
- memcpy((uint8_t *)dmp->dma.virt, from, transmit_length);
+ putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t)
+ + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize);
} else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) {
rdEventLog = &pmb->un.varRdEventLog;
receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
@@ -2829,33 +4279,10 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
/* mode zero uses a bde like biu diags command */
if (mode == 0) {
-
- /* rebuild the command for sli4 using our own buffers
- * like we do for biu diags
- */
-
- rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!rxbmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
- rxbpl = (struct ulp_bde64 *) rxbmp->virt;
- if (rxbpl) {
- INIT_LIST_HEAD(&rxbmp->list);
- dmp = diag_cmd_data_alloc(phba, rxbpl,
- receive_length, 0);
- }
-
- if (!dmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&dmp->dma.list);
- pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys);
- pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys);
+ pmb->un.varWords[3] = putPaddrLow(dmabuf->phys
+ + sizeof(MAILBOX_t));
+ pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys
+ + sizeof(MAILBOX_t));
}
} else if (phba->sli_rev == LPFC_SLI_REV4) {
if (pmb->mbxCommand == MBX_DUMP_MEMORY) {
@@ -2866,36 +4293,14 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
/* receive length cannot be greater than mailbox
* extension size
*/
- if ((receive_length == 0) ||
- (receive_length > MAILBOX_EXT_SIZE)) {
+ if (receive_length == 0) {
rc = -ERANGE;
goto job_done;
}
-
- rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!rxbmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
- if (!rxbmp->virt) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&rxbmp->list);
- rxbpl = (struct ulp_bde64 *) rxbmp->virt;
- dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length,
- 0);
- if (!dmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&dmp->dma.list);
- pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys);
- pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys);
+ pmb->un.varWords[3] = putPaddrLow(dmabuf->phys
+ + sizeof(MAILBOX_t));
+ pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys
+ + sizeof(MAILBOX_t));
} else if ((pmb->mbxCommand == MBX_UPDATE_CFG) &&
pmb->un.varUpdateCfg.co) {
bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
@@ -2905,102 +4310,53 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
rc = -ERANGE;
goto job_done;
}
-
- rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!rxbmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
- if (!rxbmp->virt) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&rxbmp->list);
- rxbpl = (struct ulp_bde64 *) rxbmp->virt;
- dmp = diag_cmd_data_alloc(phba, rxbpl,
- bde->tus.f.bdeSize, 0);
- if (!dmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- INIT_LIST_HEAD(&dmp->dma.list);
- bde->addrHigh = putPaddrHigh(dmp->dma.phys);
- bde->addrLow = putPaddrLow(dmp->dma.phys);
-
- /* copy the transmit data found in the mailbox
- * extension area
- */
- from = (uint8_t *)mb;
- from += sizeof(MAILBOX_t);
- memcpy((uint8_t *)dmp->dma.virt, from,
- bde->tus.f.bdeSize);
+ bde->addrHigh = putPaddrHigh(dmabuf->phys
+ + sizeof(MAILBOX_t));
+ bde->addrLow = putPaddrLow(dmabuf->phys
+ + sizeof(MAILBOX_t));
} else if (pmb->mbxCommand == MBX_SLI4_CONFIG) {
- /* rebuild the command for sli4 using our own buffers
- * like we do for biu diags
- */
- header = (struct mbox_header *)&pmb->un.varWords[0];
- nembed_sge = (struct lpfc_mbx_nembed_cmd *)
- &pmb->un.varWords[0];
- receive_length = nembed_sge->sge[0].length;
-
- /* receive length cannot be greater than mailbox
- * extension size
- */
- if ((receive_length == 0) ||
- (receive_length > MAILBOX_EXT_SIZE)) {
- rc = -ERANGE;
- goto job_done;
- }
-
- rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!rxbmp) {
- rc = -ENOMEM;
- goto job_done;
- }
-
- rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys);
- if (!rxbmp->virt) {
- rc = -ENOMEM;
- goto job_done;
- }
+ /* Handling non-embedded SLI_CONFIG mailbox command */
+ sli4_config = &pmboxq->u.mqe.un.sli4_config;
+ if (!bf_get(lpfc_mbox_hdr_emb,
+ &sli4_config->header.cfg_mhdr)) {
+ /* rebuild the command for sli4 using our
+ * own buffers like we do for biu diags
+ */
+ header = (struct mbox_header *)
+ &pmb->un.varWords[0];
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &pmb->un.varWords[0];
+ receive_length = nembed_sge->sge[0].length;
+
+ /* receive length cannot be greater than
+ * mailbox extension size
+ */
+ if ((receive_length == 0) ||
+ (receive_length > MAILBOX_EXT_SIZE)) {
+ rc = -ERANGE;
+ goto job_done;
+ }
- INIT_LIST_HEAD(&rxbmp->list);
- rxbpl = (struct ulp_bde64 *) rxbmp->virt;
- dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length,
- 0);
- if (!dmp) {
- rc = -ENOMEM;
- goto job_done;
+ nembed_sge->sge[0].pa_hi =
+ putPaddrHigh(dmabuf->phys
+ + sizeof(MAILBOX_t));
+ nembed_sge->sge[0].pa_lo =
+ putPaddrLow(dmabuf->phys
+ + sizeof(MAILBOX_t));
}
-
- INIT_LIST_HEAD(&dmp->dma.list);
- nembed_sge->sge[0].pa_hi = putPaddrHigh(dmp->dma.phys);
- nembed_sge->sge[0].pa_lo = putPaddrLow(dmp->dma.phys);
- /* copy the transmit data found in the mailbox
- * extension area
- */
- from = (uint8_t *)mb;
- from += sizeof(MAILBOX_t);
- memcpy((uint8_t *)dmp->dma.virt, from,
- header->cfg_mhdr.payload_length);
}
}
- dd_data->context_un.mbox.rxbmp = rxbmp;
- dd_data->context_un.mbox.dmp = dmp;
+ dd_data->context_un.mbox.dmabuffers = dmabuf;
/* setup wake call as IOCB callback */
- pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait;
+ pmboxq->mbox_cmpl = lpfc_bsg_issue_mbox_cmpl;
/* setup context field to pass wait_queue pointer to wake function */
pmboxq->context1 = dd_data;
dd_data->type = TYPE_MBOX;
dd_data->context_un.mbox.pmboxq = pmboxq;
- dd_data->context_un.mbox.mb = mb;
+ dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx;
dd_data->context_un.mbox.set_job = job;
dd_data->context_un.mbox.ext = ext;
dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset;
@@ -3017,11 +4373,11 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
}
/* job finished, copy the data */
- memcpy(mb, pmb, sizeof(*pmb));
+ memcpy(pmbx, pmb, sizeof(*pmb));
job->reply->reply_payload_rcv_len =
sg_copy_from_buffer(job->reply_payload.sg_list,
- job->reply_payload.sg_cnt,
- mb, size);
+ job->reply_payload.sg_cnt,
+ pmbx, size);
/* not waiting mbox already done */
rc = 0;
goto job_done;
@@ -3033,22 +4389,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
job_done:
/* common exit for error or job completed inline */
- kfree(mb);
if (pmboxq)
mempool_free(pmboxq, phba->mbox_mem_pool);
- kfree(ext);
- if (dmp) {
- dma_free_coherent(&phba->pcidev->dev,
- dmp->size, dmp->dma.virt,
- dmp->dma.phys);
- kfree(dmp);
- }
- if (rxbmp) {
- lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys);
- kfree(rxbmp);
- }
+ lpfc_bsg_dma_page_free(phba, dmabuf);
kfree(dd_data);
+job_cont:
return rc;
}
@@ -3061,37 +4407,28 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job
{
struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
struct lpfc_hba *phba = vport->phba;
+ struct dfc_mbox_req *mbox_req;
int rc = 0;
- /* in case no data is transferred */
+ /* mix-and-match backward compatibility */
job->reply->reply_payload_rcv_len = 0;
if (job->request_len <
sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
- "2737 Received MBOX_REQ request below "
- "minimum size\n");
- rc = -EINVAL;
- goto job_error;
- }
-
- if (job->request_payload.payload_len != BSG_MBOX_SIZE) {
- rc = -EINVAL;
- goto job_error;
- }
-
- if (job->reply_payload.payload_len != BSG_MBOX_SIZE) {
- rc = -EINVAL;
- goto job_error;
- }
-
- if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
- rc = -EAGAIN;
- goto job_error;
+ lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
+ "2737 Mix-and-match backward compability "
+ "between MBOX_REQ old size:%d and "
+ "new request size:%d\n",
+ (int)(job->request_len -
+ sizeof(struct fc_bsg_request)),
+ (int)sizeof(struct dfc_mbox_req));
+ mbox_req = (struct dfc_mbox_req *)
+ job->request->rqst_data.h_vendor.vendor_cmd;
+ mbox_req->extMboxTag = 0;
+ mbox_req->extSeqNum = 0;
}
rc = lpfc_bsg_issue_mbox(phba, job, vport);
-job_error:
if (rc == 0) {
/* job done */
job->reply->result = 0;
@@ -3422,10 +4759,16 @@ lpfc_bsg_hst_vendor(struct fc_bsg_job *j
rc = lpfc_bsg_send_mgmt_rsp(job);
break;
case LPFC_BSG_VENDOR_DIAG_MODE:
- rc = lpfc_bsg_diag_mode(job);
+ rc = lpfc_bsg_diag_loopback_mode(job);
+ break;
+ case LPFC_BSG_VENDOR_DIAG_MODE_END:
+ rc = lpfc_sli4_bsg_diag_mode_end(job);
+ break;
+ case LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK:
+ rc = lpfc_bsg_diag_loopback_run(job);
break;
- case LPFC_BSG_VENDOR_DIAG_TEST:
- rc = lpfc_bsg_diag_test(job);
+ case LPFC_BSG_VENDOR_LINK_DIAG_TEST:
+ rc = lpfc_sli4_bsg_link_diag_test(job);
break;
case LPFC_BSG_VENDOR_GET_MGMT_REV:
rc = lpfc_bsg_get_dfc_rev(job);
@@ -3544,6 +4887,8 @@ lpfc_bsg_timeout(struct fc_bsg_job *job)
/* the mbox completion handler can now be run */
spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
job->job_done(job);
+ if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT)
+ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS;
break;
case TYPE_MENLO:
menlo = &dd_data->context_un.menlo;
diff -upNr a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
--- a/drivers/scsi/lpfc/lpfc_bsg.h 2011-05-20 19:54:39.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_bsg.h 2011-05-23 17:10:55.000000000 -0400
@@ -24,15 +24,17 @@
* These are the vendor unique structures passed in using the bsg
* FC_BSG_HST_VENDOR message code type.
*/
-#define LPFC_BSG_VENDOR_SET_CT_EVENT 1
-#define LPFC_BSG_VENDOR_GET_CT_EVENT 2
-#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3
-#define LPFC_BSG_VENDOR_DIAG_MODE 4
-#define LPFC_BSG_VENDOR_DIAG_TEST 5
-#define LPFC_BSG_VENDOR_GET_MGMT_REV 6
-#define LPFC_BSG_VENDOR_MBOX 7
-#define LPFC_BSG_VENDOR_MENLO_CMD 8
-#define LPFC_BSG_VENDOR_MENLO_DATA 9
+#define LPFC_BSG_VENDOR_SET_CT_EVENT 1
+#define LPFC_BSG_VENDOR_GET_CT_EVENT 2
+#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3
+#define LPFC_BSG_VENDOR_DIAG_MODE 4
+#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5
+#define LPFC_BSG_VENDOR_GET_MGMT_REV 6
+#define LPFC_BSG_VENDOR_MBOX 7
+#define LPFC_BSG_VENDOR_MENLO_CMD 8
+#define LPFC_BSG_VENDOR_MENLO_DATA 9
+#define LPFC_BSG_VENDOR_DIAG_MODE_END 10
+#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11
struct set_ct_event {
uint32_t command;
@@ -67,10 +69,25 @@ struct diag_mode_set {
uint32_t timeout;
};
+struct sli4_link_diag {
+ uint32_t command;
+ uint32_t timeout;
+ uint32_t test_id;
+ uint32_t loops;
+ uint32_t test_version;
+ uint32_t error_action;
+};
+
struct diag_mode_test {
uint32_t command;
};
+struct diag_status {
+ uint32_t mbox_status;
+ uint32_t shdr_status;
+ uint32_t shdr_add_status;
+};
+
#define LPFC_WWNN_TYPE 0
#define LPFC_WWPN_TYPE 1
@@ -92,11 +109,15 @@ struct get_mgmt_rev_reply {
};
#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
+
+/* BSG mailbox request header */
struct dfc_mbox_req {
uint32_t command;
uint32_t mbOffset;
uint32_t inExtWLen;
uint32_t outExtWLen;
+ uint32_t extMboxTag;
+ uint32_t extSeqNum;
};
/* Used for menlo command or menlo data. The xri is only used for menlo data */
@@ -171,7 +192,7 @@ struct lpfc_sli_config_mse {
#define lpfc_mbox_sli_config_mse_len_WORD buf_len
};
-struct lpfc_sli_config_subcmd_hbd {
+struct lpfc_sli_config_hbd {
uint32_t buf_len;
#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0
#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff
@@ -194,21 +215,39 @@ struct lpfc_sli_config_hdr {
uint32_t reserved5;
};
-struct lpfc_sli_config_generic {
+struct lpfc_sli_config_emb0_subsys {
struct lpfc_sli_config_hdr sli_config_hdr;
#define LPFC_MBX_SLI_CONFIG_MAX_MSE 19
struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
+ uint32_t padding;
+ uint32_t word64;
+#define lpfc_emb0_subcmnd_opcode_SHIFT 0
+#define lpfc_emb0_subcmnd_opcode_MASK 0xff
+#define lpfc_emb0_subcmnd_opcode_WORD word64
+#define lpfc_emb0_subcmnd_subsys_SHIFT 8
+#define lpfc_emb0_subcmnd_subsys_MASK 0xff
+#define lpfc_emb0_subcmnd_subsys_WORD word64
+/* Subsystem FCOE (0x0C) OpCodes */
+#define SLI_CONFIG_SUBSYS_FCOE 0x0C
+#define FCOE_OPCODE_READ_FCF 0x08
+#define FCOE_OPCODE_ADD_FCF 0x09
};
-struct lpfc_sli_config_subcmnd {
+struct lpfc_sli_config_emb1_subsys {
struct lpfc_sli_config_hdr sli_config_hdr;
uint32_t word6;
-#define lpfc_subcmnd_opcode_SHIFT 0
-#define lpfc_subcmnd_opcode_MASK 0xff
-#define lpfc_subcmnd_opcode_WORD word6
-#define lpfc_subcmnd_subsys_SHIFT 8
-#define lpfc_subcmnd_subsys_MASK 0xff
-#define lpfc_subcmnd_subsys_WORD word6
+#define lpfc_emb1_subcmnd_opcode_SHIFT 0
+#define lpfc_emb1_subcmnd_opcode_MASK 0xff
+#define lpfc_emb1_subcmnd_opcode_WORD word6
+#define lpfc_emb1_subcmnd_subsys_SHIFT 8
+#define lpfc_emb1_subcmnd_subsys_MASK 0xff
+#define lpfc_emb1_subcmnd_subsys_WORD word6
+/* Subsystem COMN (0x01) OpCodes */
+#define SLI_CONFIG_SUBSYS_COMN 0x01
+#define COMN_OPCODE_READ_OBJECT 0xAB
+#define COMN_OPCODE_WRITE_OBJECT 0xAC
+#define COMN_OPCODE_READ_OBJECT_LIST 0xAD
+#define COMN_OPCODE_DELETE_OBJECT 0xAE
uint32_t timeout;
uint32_t request_length;
uint32_t word9;
@@ -222,8 +261,8 @@ struct lpfc_sli_config_subcmnd {
uint32_t rd_offset;
uint32_t obj_name[26];
uint32_t hbd_count;
-#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10
- struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
+#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8
+ struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
};
struct lpfc_sli_config_mbox {
@@ -235,7 +274,11 @@ struct lpfc_sli_config_mbox {
#define lpfc_mqe_command_MASK 0x000000FF
#define lpfc_mqe_command_WORD word0
union {
- struct lpfc_sli_config_generic sli_config_generic;
- struct lpfc_sli_config_subcmnd sli_config_subcmnd;
+ struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys;
+ struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys;
} un;
};
+
+/* driver only */
+#define SLI_CONFIG_NOT_HANDLED 0
+#define SLI_CONFIG_HANDLED 1
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2011-05-23 17:05:08.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc.h 2011-05-23 17:10:55.000000000 -0400
@@ -487,6 +487,42 @@ struct unsol_rcv_ct_ctx {
(1 << LPFC_USER_LINK_SPEED_AUTO))
#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
+enum nemb_type {
+ nemb_mse = 1,
+ nemb_hbd
+};
+
+enum mbox_type {
+ mbox_rd = 1,
+ mbox_wr
+};
+
+enum dma_type {
+ dma_mbox = 1,
+ dma_ebuf
+};
+
+enum sta_type {
+ sta_pre_addr = 1,
+ sta_pos_addr
+};
+
+struct lpfc_mbox_ext_buf_ctx {
+ uint32_t state;
+#define LPFC_BSG_MBOX_IDLE 0
+#define LPFC_BSG_MBOX_HOST 1
+#define LPFC_BSG_MBOX_PORT 2
+#define LPFC_BSG_MBOX_DONE 3
+#define LPFC_BSG_MBOX_ABTS 4
+ enum nemb_type nembType;
+ enum mbox_type mboxType;
+ uint32_t numBuf;
+ uint32_t mbxTag;
+ uint32_t seqNum;
+ struct lpfc_dmabuf *mbx_dmabuf;
+ struct list_head ext_dmabuf_list;
+};
+
struct lpfc_hba {
/* SCSI interface function jump table entries */
int (*lpfc_new_scsi_buf)
@@ -590,6 +626,7 @@ struct lpfc_hba {
MAILBOX_t *mbox;
uint32_t *mbox_ext;
+ struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
uint32_t ha_copy;
struct _PCB *pcb;
struct _IOCB *IOCBs;
@@ -708,7 +745,6 @@ struct lpfc_hba {
uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
int brd_no; /* FC board number */
-
char SerialNumber[32]; /* adapter Serial Number */
char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
char ModelDesc[256]; /* Model Description */
diff -upNr a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
--- a/drivers/scsi/lpfc/lpfc_hw4.h 2011-05-23 17:05:08.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_hw4.h 2011-05-23 17:10:55.000000000 -0400
@@ -867,6 +867,8 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
#define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10
+#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22
+#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23
/* Mailbox command structures */
struct eq_context {
@@ -1308,6 +1310,83 @@ struct lpfc_id_range {
#define lpfc_mbx_rsrc_id_word4_1_WORD word5
};
+struct lpfc_mbx_set_link_diag_state {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_set_diag_state_diag_SHIFT 0
+#define lpfc_mbx_set_diag_state_diag_MASK 0x00000001
+#define lpfc_mbx_set_diag_state_diag_WORD word0
+#define lpfc_mbx_set_diag_state_link_num_SHIFT 16
+#define lpfc_mbx_set_diag_state_link_num_MASK 0x0000003F
+#define lpfc_mbx_set_diag_state_link_num_WORD word0
+#define lpfc_mbx_set_diag_state_link_type_SHIFT 22
+#define lpfc_mbx_set_diag_state_link_type_MASK 0x00000003
+#define lpfc_mbx_set_diag_state_link_type_WORD word0
+ } req;
+ struct {
+ uint32_t word0;
+ } rsp;
+ } u;
+};
+
+struct lpfc_mbx_set_link_diag_loopback {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_set_diag_lpbk_type_SHIFT 0
+#define lpfc_mbx_set_diag_lpbk_type_MASK 0x00000001
+#define lpfc_mbx_set_diag_lpbk_type_WORD word0
+#define LPFC_DIAG_LOOPBACK_TYPE_DISABLE 0x0
+#define LPFC_DIAG_LOOPBACK_TYPE_INTERNAL 0x1
+#define LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL 0x2
+#define lpfc_mbx_set_diag_lpbk_link_num_SHIFT 16
+#define lpfc_mbx_set_diag_lpbk_link_num_MASK 0x0000003F
+#define lpfc_mbx_set_diag_lpbk_link_num_WORD word0
+#define lpfc_mbx_set_diag_lpbk_link_type_SHIFT 22
+#define lpfc_mbx_set_diag_lpbk_link_type_MASK 0x00000003
+#define lpfc_mbx_set_diag_lpbk_link_type_WORD word0
+ } req;
+ struct {
+ uint32_t word0;
+ } rsp;
+ } u;
+};
+
+struct lpfc_mbx_run_link_diag_test {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_run_diag_test_link_num_SHIFT 16
+#define lpfc_mbx_run_diag_test_link_num_MASK 0x0000003F
+#define lpfc_mbx_run_diag_test_link_num_WORD word0
+#define lpfc_mbx_run_diag_test_link_type_SHIFT 22
+#define lpfc_mbx_run_diag_test_link_type_MASK 0x00000003
+#define lpfc_mbx_run_diag_test_link_type_WORD word0
+ uint32_t word1;
+#define lpfc_mbx_run_diag_test_test_id_SHIFT 0
+#define lpfc_mbx_run_diag_test_test_id_MASK 0x0000FFFF
+#define lpfc_mbx_run_diag_test_test_id_WORD word1
+#define lpfc_mbx_run_diag_test_loops_SHIFT 16
+#define lpfc_mbx_run_diag_test_loops_MASK 0x0000FFFF
+#define lpfc_mbx_run_diag_test_loops_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_run_diag_test_test_ver_SHIFT 0
+#define lpfc_mbx_run_diag_test_test_ver_MASK 0x0000FFFF
+#define lpfc_mbx_run_diag_test_test_ver_WORD word2
+#define lpfc_mbx_run_diag_test_err_act_SHIFT 16
+#define lpfc_mbx_run_diag_test_err_act_MASK 0x000000FF
+#define lpfc_mbx_run_diag_test_err_act_WORD word2
+ } req;
+ struct {
+ uint32_t word0;
+ } rsp;
+ } u;
+};
+
/*
* struct lpfc_mbx_alloc_rsrc_extents:
* A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires
@@ -2553,6 +2632,9 @@ struct lpfc_mqe {
struct lpfc_mbx_supp_pages supp_pages;
struct lpfc_mbx_pc_sli4_params sli4_params;
struct lpfc_mbx_get_sli4_parameters get_sli4_parameters;
+ struct lpfc_mbx_set_link_diag_state link_diag_state;
+ struct lpfc_mbx_set_link_diag_loopback link_diag_loopback;
+ struct lpfc_mbx_run_link_diag_test link_diag_test;
struct lpfc_mbx_get_func_cfg get_func_cfg;
struct lpfc_mbx_get_prof_cfg get_prof_cfg;
struct lpfc_mbx_nop nop;
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2011-05-23 17:05:08.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_init.c 2011-05-23 17:10:55.000000000 -0400
@@ -4247,6 +4247,14 @@ lpfc_sli4_driver_resource_setup(struct l
phba->fcf.redisc_wait.data = (unsigned long)phba;
/*
+ * Control structure for handling external multi-buffer mailbox
+ * command pass-through.
+ */
+ memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0,
+ sizeof(struct lpfc_mbox_ext_buf_ctx));
+ INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+
+ /*
* We need to do a READ_CONFIG mailbox command here before
* calling lpfc_get_cfgparam. For VFs this will report the
* MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
