From: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
When reading a single byte using the READ SFP mailbox command, the
single byte of data is returned in MB[1] and not MB[8].
The reason that MB[8] was being used is that the spec was unclear
as it evolved over time; and we have not needed to read a single
byte until recently.
Signed-off-by: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_mbx.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 975aeaa..aab628b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3608,14 +3608,14 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
mcp->mb[9] = adr;
mcp->mb[10] = opt;
mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
if (opt & BIT_0)
if (sfp)
- *sfp = mcp->mb[8];
+ *sfp = mcp->mb[1];
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
