>-----Original Message----- >From: Pasi Kärkkäinen [mailto:pasik@xxxxxx] >Sent: Tuesday, April 26, 2011 4:50 PM >To: open-iscsi@xxxxxxxxxxxxxxxx >Cc: James.Bottomley@xxxxxxx; Mike Christie; linux-scsi@xxxxxxxxxxxxxxx; >Vikas Chaudhary; Lalit Chandivade; Ravi Anand; Harish Zunjarrao >Subject: Re: FW: [PATCH] iscsiadm: Add netconfig support in iscsiadm and >iscsid > >On Fri, Apr 22, 2011 at 09:24:15PM -0700, Vikas Chaudhary wrote: >> Added open-iscsi group is CC list. >> >> From: Lalit Chandivade <lalit.chandivade@xxxxxxxxxx> >> >> 1. Current status: >> Using iscsiadm one cannot do any network configuration for qla4xxx >adapters. >> However an iface is created for the qla4xxx ports using the hwaddress. >> >> \# ls /etc/iscsi/ifaces/ >> iface.example iface0 qla4xxx.00:0e:1e:04:8b:2a >qla4xxx.00:0e:1e:04:8b:2e >> >> This allows user to issue sendtargets via the qla4xxx iscsi offload. >> >> 2. Current Proposal: >> Current proposal is to allow iscsiadm to configure the network settings >for qla4xxx ports. >> > >Hello, > >Configuring jumbo frames for qla4xxx interfaces is not supposed >to be done using iscsiadm? One still needs qlogic (vendor) specific >tool for that? > >Or did I miss something? > Current patch supports only basic network configuration, it does not support MTU/jumbo frame configuration. We are planning to add more features like this latter once initial network configuration patch is accepted. This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
