Debugfs enhancements
- Added iDiag support for new adapters.
- Added queue entry access methods.
- Fix host/port index in decimal
- Added Doorbell register access methods.
Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc.h | 2
lpfc_debugfs.c | 931 +++++++++++++++++++++++++++++++++++++++++++--------------
lpfc_debugfs.h | 48 ++
3 files changed, 759 insertions(+), 222 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
--- a/drivers/scsi/lpfc/lpfc_debugfs.c 2011-04-16 08:29:50.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c 2011-04-16 09:34:09.000000000 -0400
@@ -1119,172 +1119,14 @@ lpfc_debugfs_dumpDataDif_release(struct
}
/*
+ * ---------------------------------
* iDiag debugfs file access methods
- */
-
-/*
- * iDiag PCI config space register access methods:
- *
- * The PCI config space register accessees of read, write, read-modify-write
- * for set bits, and read-modify-write for clear bits to SLI4 PCI functions
- * are provided. In the proper SLI4 PCI function's debugfs iDiag directory,
- *
- * /sys/kernel/debug/lpfc/fn<#>/iDiag
- *
- * the access is through the debugfs entry pciCfg:
- *
- * 1. For PCI config space register read access, there are two read methods:
- * A) read a single PCI config space register in the size of a byte
- * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through
- * the 4K extended PCI config space.
- *
- * A) Read a single PCI config space register consists of two steps:
- *
- * Step-1: Set up PCI config space register read command, the command
- * syntax is,
- *
- * echo 1 <where> <count> > pciCfg
- *
- * where, 1 is the iDiag command for PCI config space read, <where> is the
- * offset from the beginning of the device's PCI config space to read from,
- * and <count> is the size of PCI config space register data to read back,
- * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits
- * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes).
- *
- * Setp-2: Perform the debugfs read operation to execute the idiag command
- * set up in Step-1,
- *
- * cat pciCfg
- *
- * Examples:
- * To read PCI device's vendor-id and device-id from PCI config space,
- *
- * echo 1 0 4 > pciCfg
- * cat pciCfg
- *
- * To read PCI device's currnt command from config space,
- *
- * echo 1 4 2 > pciCfg
- * cat pciCfg
- *
- * B) Browse through the entire 4K extended PCI config space also consists
- * of two steps:
- *
- * Step-1: Set up PCI config space register browsing command, the command
- * syntax is,
- *
- * echo 1 0 4096 > pciCfg
- *
- * where, 1 is the iDiag command for PCI config space read, 0 must be used
- * as the offset for PCI config space register browse, and 4096 must be
- * used as the count for PCI config space register browse.
- *
- * Step-2: Repeately issue the debugfs read operation to browse through
- * the entire PCI config space registers:
- *
- * cat pciCfg
- * cat pciCfg
- * cat pciCfg
- * ...
- *
- * When browsing to the end of the 4K PCI config space, the browse method
- * shall wrap around to start reading from beginning again, and again...
- *
- * 2. For PCI config space register write access, it supports a single PCI
- * config space register write in the size of a byte (8 bits), a word
- * (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 2 <where> <count> <value> > pciCfg
- *
- * where, 2 is the iDiag command for PCI config space write, <where> is
- * the offset from the beginning of the device's PCI config space to write
- * into, <count> is the size of data to write into the PCI config space,
- * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits
- * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value>
- * is the data to be written into the PCI config space register at the
- * offset.
- *
- * Examples:
- * To disable PCI device's interrupt assertion,
- *
- * 1) Read in device's PCI config space register command field <cmd>:
- *
- * echo 1 4 2 > pciCfg
- * cat pciCfg
- *
- * 2) Set bit 10 (Interrupt Disable bit) in the <cmd>:
- *
- * <cmd> = <cmd> | (1 < 10)
- *
- * 3) Write the modified command back:
- *
- * echo 2 4 2 <cmd> > pciCfg
- *
- * 3. For PCI config space register set bits access, it supports a single PCI
- * config space register set bits in the size of a byte (8 bits), a word
- * (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 3 <where> <count> <bitmask> > pciCfg
- *
- * where, 3 is the iDiag command for PCI config space set bits, <where> is
- * the offset from the beginning of the device's PCI config space to set
- * bits into, <count> is the size of the bitmask to set into the PCI config
- * space, it will be 1 for setting a byte (8 bits), 2 for setting a word
- * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and
- * <bitmask> is the bitmask, indicating the bits to be set into the PCI
- * config space register at the offset. The logic performed to the content
- * of the PCI config space register, regval, is,
- *
- * regval |= <bitmask>
- *
- * 4. For PCI config space register clear bits access, it supports a single
- * PCI config space register clear bits in the size of a byte (8 bits),
- * a word (16 bits), or a dword (32 bits). The command syntax is,
- *
- * echo 4 <where> <count> <bitmask> > pciCfg
- *
- * where, 4 is the iDiag command for PCI config space clear bits, <where>
- * is the offset from the beginning of the device's PCI config space to
- * clear bits from, <count> is the size of the bitmask to set into the PCI
- * config space, it will be 1 for setting a byte (8 bits), 2 for setting
- * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4
- * bytes), and <bitmask> is the bitmask, indicating the bits to be cleared
- * from the PCI config space register at the offset. the logic performed
- * to the content of the PCI config space register, regval, is,
- *
- * regval &= ~<bitmask>
+ * ---------------------------------
*
- * Note, for all single register read, write, set bits, or clear bits access,
- * the offset (<where>) must be aligned with the size of the data:
+ * All access methods are through the proper SLI4 PCI function's debugfs
+ * iDiag directory:
*
- * For data size of byte (8 bits), the offset must be aligned to the byte
- * boundary; for data size of word (16 bits), the offset must be aligned
- * to the word boundary; while for data size of dword (32 bits), the offset
- * must be aligned to the dword boundary. Otherwise, the interface will
- * return the error:
- *
- * "-bash: echo: write error: Invalid argument".
- *
- * For example:
- *
- * echo 1 2 4 > pciCfg
- * -bash: echo: write error: Invalid argument
- *
- * Note also, all of the numbers in the command fields for all read, write,
- * set bits, and clear bits PCI config space register command fields can be
- * either decimal or hex.
- *
- * For example,
- * echo 1 0 4096 > pciCfg
- *
- * will be the same as
- * echo 1 0 0x1000 > pciCfg
- *
- * And,
- * echo 2 155 1 10 > pciCfg
- *
- * will be
- * echo 2 0x9b 1 0xa > pciCfg
+ * /sys/kernel/debug/lpfc/fn<#>/iDiag
*/
/**
@@ -1331,10 +1173,10 @@ static int lpfc_idiag_cmd_get(const char
for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
step_str = strsep(&pbuf, "\t ");
if (!step_str)
- return 0;
+ return i;
idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
}
- return 0;
+ return i;
}
/**
@@ -1403,7 +1245,7 @@ lpfc_idiag_release(struct inode *inode,
* Description:
* This routine frees the buffer that was allocated when the debugfs file
* was opened. It also reset the fields in the idiag command struct in the
- * case the command is not continuous browsing of the data structure.
+ * case of command for write operation.
*
* Returns:
* This function returns zero.
@@ -1413,18 +1255,20 @@ lpfc_idiag_cmd_release(struct inode *ino
{
struct lpfc_debug *debug = file->private_data;
- /* Read PCI config register, if not read all, clear command fields */
- if ((debug->op == LPFC_IDIAG_OP_RD) &&
- (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD))
- if ((idiag.cmd.data[1] == sizeof(uint8_t)) ||
- (idiag.cmd.data[1] == sizeof(uint16_t)) ||
- (idiag.cmd.data[1] == sizeof(uint32_t)))
+ if (debug->op == LPFC_IDIAG_OP_WR) {
+ switch (idiag.cmd.opcode) {
+ case LPFC_IDIAG_CMD_PCICFG_WR:
+ case LPFC_IDIAG_CMD_PCICFG_ST:
+ case LPFC_IDIAG_CMD_PCICFG_CL:
+ case LPFC_IDIAG_CMD_QUEACC_WR:
+ case LPFC_IDIAG_CMD_QUEACC_ST:
+ case LPFC_IDIAG_CMD_QUEACC_CL:
memset(&idiag, 0, sizeof(idiag));
-
- /* Write PCI config register, clear command fields */
- if ((debug->op == LPFC_IDIAG_OP_WR) &&
- (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR))
- memset(&idiag, 0, sizeof(idiag));
+ break;
+ default:
+ break;
+ }
+ }
/* Free the buffers to the file operation */
kfree(debug->buffer);
@@ -1504,7 +1348,7 @@ lpfc_idiag_pcicfg_read(struct file *file
len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
"%03x: %08x\n", where, u32val);
break;
- case LPFC_PCI_CFG_SIZE: /* browse all */
+ case LPFC_PCI_CFG_BROWSE: /* browse all */
goto pcicfg_browse;
break;
default:
@@ -1586,16 +1430,21 @@ lpfc_idiag_pcicfg_write(struct file *fil
debug->op = LPFC_IDIAG_OP_WR;
rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
- if (rc)
+ if (rc < 0)
return rc;
if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+ /* Sanity check on PCI config read command line arguments */
+ if (rc != LPFC_PCI_CFG_RD_CMD_ARG)
+ goto error_out;
/* Read command from PCI config space, set up command fields */
where = idiag.cmd.data[0];
count = idiag.cmd.data[1];
- if (count == LPFC_PCI_CFG_SIZE) {
- if (where != 0)
+ if (count == LPFC_PCI_CFG_BROWSE) {
+ if (where % sizeof(uint32_t))
goto error_out;
+ /* Starting offset to browse */
+ idiag.offset.last_rd = where;
} else if ((count != sizeof(uint8_t)) &&
(count != sizeof(uint16_t)) &&
(count != sizeof(uint32_t)))
@@ -1621,6 +1470,9 @@ lpfc_idiag_pcicfg_write(struct file *fil
} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ /* Sanity check on PCI config write command line arguments */
+ if (rc != LPFC_PCI_CFG_WR_CMD_ARG)
+ goto error_out;
/* Write command to PCI config space, read-modify-write */
where = idiag.cmd.data[0];
count = idiag.cmd.data[1];
@@ -1753,10 +1605,12 @@ lpfc_idiag_queinfo_read(struct file *fil
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
"Slow-path EQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tEQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.sp_eq->queue_id,
phba->sli4_hba.sp_eq->entry_count,
+ phba->sli4_hba.sp_eq->entry_size,
phba->sli4_hba.sp_eq->host_index,
phba->sli4_hba.sp_eq->hba_index);
@@ -1765,10 +1619,12 @@ lpfc_idiag_queinfo_read(struct file *fil
"Fast-path EQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tEQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.fp_eq[fcp_qidx]->queue_id,
phba->sli4_hba.fp_eq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fp_eq[fcp_qidx]->entry_size,
phba->sli4_hba.fp_eq[fcp_qidx]->host_index,
phba->sli4_hba.fp_eq[fcp_qidx]->hba_index);
}
@@ -1776,89 +1632,101 @@ lpfc_idiag_queinfo_read(struct file *fil
/* Get mailbox complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Mailbox CQ information:\n");
+ "Slow-path MBX CQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.mbx_cq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], CQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tCQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.mbx_cq->queue_id,
phba->sli4_hba.mbx_cq->entry_count,
+ phba->sli4_hba.mbx_cq->entry_size,
phba->sli4_hba.mbx_cq->host_index,
phba->sli4_hba.mbx_cq->hba_index);
/* Get slow-path complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Slow-path CQ information:\n");
+ "Slow-path ELS CQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.els_cq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], CQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tCQID [%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.els_cq->queue_id,
phba->sli4_hba.els_cq->entry_count,
+ phba->sli4_hba.els_cq->entry_size,
phba->sli4_hba.els_cq->host_index,
phba->sli4_hba.els_cq->hba_index);
/* Get fast-path complete queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Fast-path CQ information:\n");
+ "Fast-path FCP CQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated EQ-ID [%02d]:\n",
+ "Associated EQID[%02d]:\n",
phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], EQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
- phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
- phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
- phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
- phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
+ "\tCQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
+ phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
}
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
/* Get mailbox queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Mailbox MQ information:\n");
+ "Slow-path MBX MQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.mbx_wq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], MQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.mbx_wq->queue_id,
phba->sli4_hba.mbx_wq->entry_count,
+ phba->sli4_hba.mbx_wq->entry_size,
phba->sli4_hba.mbx_wq->host_index,
phba->sli4_hba.mbx_wq->hba_index);
/* Get slow-path work queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Slow-path WQ information:\n");
+ "Slow-path ELS WQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.els_wq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], WQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
phba->sli4_hba.els_wq->queue_id,
phba->sli4_hba.els_wq->entry_count,
+ phba->sli4_hba.els_wq->entry_size,
phba->sli4_hba.els_wq->host_index,
phba->sli4_hba.els_wq->hba_index);
/* Get fast-path work queue information */
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "Fast-path WQ information:\n");
+ "Fast-path FCP WQ information:\n");
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) {
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], WQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tWQID[%02d], "
+ "QE-COUNT[%04d], WQE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id,
phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_wq[fcp_qidx]->entry_size,
phba->sli4_hba.fcp_wq[fcp_qidx]->host_index,
phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index);
}
@@ -1868,26 +1736,597 @@ lpfc_idiag_queinfo_read(struct file *fil
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
"Slow-path RQ information:\n");
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\t\tAssociated CQ-ID [%02d]:\n",
+ "Associated CQID[%02d]:\n",
phba->sli4_hba.hdr_rq->assoc_qid);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], RHQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tHQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.hdr_rq->queue_id,
phba->sli4_hba.hdr_rq->entry_count,
+ phba->sli4_hba.hdr_rq->entry_size,
phba->sli4_hba.hdr_rq->host_index,
phba->sli4_hba.hdr_rq->hba_index);
len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
- "\tID [%02d], RDQE-COUNT [%04d], "
- "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ "\tDQID[%02d], "
+ "QE-COUNT[%04d], QE-SIZE[%04d], "
+ "HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
phba->sli4_hba.dat_rq->queue_id,
phba->sli4_hba.dat_rq->entry_count,
+ phba->sli4_hba.dat_rq->entry_size,
phba->sli4_hba.dat_rq->host_index,
phba->sli4_hba.dat_rq->hba_index);
return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}
+/**
+ * lpfc_idiag_que_param_check - queue access command parameter sanity check
+ * @q: The pointer to queue structure.
+ * @index: The index into a queue entry.
+ * @count: The number of queue entries to access.
+ *
+ * Description:
+ * The routine performs sanity check on device queue access method commands.
+ *
+ * Returns:
+ * This function returns -EINVAL when fails the sanity check, otherwise, it
+ * returns 0.
+ **/
+static int
+lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count)
+{
+ /* Only support single entry read or browsing */
+ if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE))
+ return -EINVAL;
+ if (index > q->entry_count - 1)
+ return -EINVAL;
+ return 0;
+}
+
+/**
+ * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index
+ * @pbuffer: The pointer to buffer to copy the read data into.
+ * @pque: The pointer to the queue to be read.
+ * @index: The index into the queue entry.
+ *
+ * Description:
+ * This routine reads out a single entry from the given queue's index location
+ * and copies it into the buffer provided.
+ *
+ * Returns:
+ * This function returns 0 when it fails, otherwise, it returns the length of
+ * the data read into the buffer provided.
+ **/
+static int
+lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,
+ uint32_t index)
+{
+ int offset, esize;
+ uint32_t *pentry;
+
+ if (!pbuffer || !pque)
+ return 0;
+
+ esize = pque->entry_size;
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+ "QE-INDEX[%04d]:\n", index);
+
+ offset = 0;
+ pentry = pque->qe[index].address;
+ while (esize > 0) {
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+ "%08x ", *pentry);
+ pentry++;
+ offset += sizeof(uint32_t);
+ esize -= sizeof(uint32_t);
+ if (esize > 0 && !(offset % (4 * sizeof(uint32_t))))
+ len += snprintf(pbuffer+len,
+ LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+ }
+ len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+
+ return len;
+}
+
+/**
+ * lpfc_idiag_queacc_read - idiag debugfs read port queue
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device queue memory according to the
+ * idiag command, and copies to user @buf. Depending on the queue dump read
+ * command setup, it does either a single queue entry read or browing through
+ * all entries of the queue.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ uint32_t last_index, index, count;
+ struct lpfc_queue *pque = NULL;
+ char *pbuffer;
+ int len = 0;
+
+ /* This is a user read operation */
+ debug->op = LPFC_IDIAG_OP_RD;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ index = idiag.cmd.data[2];
+ count = idiag.cmd.data[3];
+ pque = (struct lpfc_queue *)idiag.ptr_private;
+ } else
+ return 0;
+
+ /* Browse the queue starting from index */
+ if (count == LPFC_QUE_ACC_BROWSE)
+ goto que_browse;
+
+ /* Read a single entry from the queue */
+ len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+
+que_browse:
+
+ /* Browse all entries from the queue */
+ last_index = idiag.offset.last_rd;
+ index = last_index;
+
+ while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) {
+ len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+ index++;
+ if (index > pque->entry_count - 1)
+ break;
+ }
+
+ /* Set up the offset for next portion of pci cfg read */
+ if (index > pque->entry_count - 1)
+ index = 0;
+ idiag.offset.last_rd = index;
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port queue read (dump) or write (set) command
+ * accordingly. In the case of port queue read command, it sets up the command
+ * in the idiag command struct for the following debugfs read operation. In
+ * the case of port queue write operation, it executes the write operation
+ * into the port queue entry accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t qidx, quetp, queid, index, count, offset, value;
+ uint32_t *pentry;
+ struct lpfc_queue *pque;
+ int rc;
+
+ /* This is a user write operation */
+ debug->op = LPFC_IDIAG_OP_WR;
+
+ rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+ if (rc < 0)
+ return rc;
+
+ /* Get and sanity check on command feilds */
+ quetp = idiag.cmd.data[0];
+ queid = idiag.cmd.data[1];
+ index = idiag.cmd.data[2];
+ count = idiag.cmd.data[3];
+ offset = idiag.cmd.data[4];
+ value = idiag.cmd.data[5];
+
+ /* Sanity check on command line arguments */
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+ if (rc != LPFC_QUE_ACC_WR_CMD_ARG)
+ goto error_out;
+ if (count != 1)
+ goto error_out;
+ } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ if (rc != LPFC_QUE_ACC_RD_CMD_ARG)
+ goto error_out;
+ } else
+ goto error_out;
+
+ switch (quetp) {
+ case LPFC_IDIAG_EQ:
+ /* Slow-path event queue */
+ if (phba->sli4_hba.sp_eq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.sp_eq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.sp_eq;
+ goto pass_check;
+ }
+ /* Fast-path event queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+ if (phba->sli4_hba.fp_eq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fp_eq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.fp_eq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_CQ:
+ /* MBX complete queue */
+ if (phba->sli4_hba.mbx_cq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.mbx_cq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.mbx_cq;
+ goto pass_check;
+ }
+ /* ELS complete queue */
+ if (phba->sli4_hba.els_cq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.els_cq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.els_cq;
+ goto pass_check;
+ }
+ /* FCP complete queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+ if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fcp_cq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private =
+ phba->sli4_hba.fcp_cq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_MQ:
+ /* MBX work queue */
+ if (phba->sli4_hba.mbx_wq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.mbx_wq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.mbx_wq;
+ goto pass_check;
+ }
+ break;
+ case LPFC_IDIAG_WQ:
+ /* ELS work queue */
+ if (phba->sli4_hba.els_wq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.els_wq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.els_wq;
+ goto pass_check;
+ }
+ /* FCP work queue */
+ for (qidx = 0; qidx < phba->cfg_fcp_wq_count; qidx++) {
+ if (phba->sli4_hba.fcp_wq[qidx]->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.fcp_wq[qidx],
+ index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private =
+ phba->sli4_hba.fcp_wq[qidx];
+ goto pass_check;
+ }
+ }
+ goto error_out;
+ break;
+ case LPFC_IDIAG_RQ:
+ /* HDR queue */
+ if (phba->sli4_hba.hdr_rq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.hdr_rq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.hdr_rq;
+ goto pass_check;
+ }
+ /* DAT queue */
+ if (phba->sli4_hba.dat_rq->queue_id == queid) {
+ /* Sanity check */
+ rc = lpfc_idiag_que_param_check(
+ phba->sli4_hba.dat_rq, index, count);
+ if (rc)
+ goto error_out;
+ idiag.ptr_private = phba->sli4_hba.dat_rq;
+ goto pass_check;
+ }
+ goto error_out;
+ break;
+ default:
+ goto error_out;
+ break;
+ }
+
+pass_check:
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+ if (count == LPFC_QUE_ACC_BROWSE)
+ idiag.offset.last_rd = index;
+ }
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+ /* Additional sanity checks on write operation */
+ pque = (struct lpfc_queue *)idiag.ptr_private;
+ if (offset > pque->entry_size/sizeof(uint32_t) - 1)
+ goto error_out;
+ pentry = pque->qe[index].address;
+ pentry += offset;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR)
+ *pentry = value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST)
+ *pentry |= value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL)
+ *pentry &= ~value;
+ }
+ return nbytes;
+
+error_out:
+ /* Clean out command structure on command error out */
+ memset(&idiag, 0, sizeof(idiag));
+ return -EINVAL;
+}
+
+/**
+ * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register
+ * @phba: The pointer to hba structure.
+ * @pbuffer: The pointer to the buffer to copy the data to.
+ * @len: The lenght of bytes to copied.
+ * @drbregid: The id to doorbell registers.
+ *
+ * Description:
+ * This routine reads a doorbell register and copies its content to the
+ * user buffer pointed to by @pbuffer.
+ *
+ * Returns:
+ * This function returns the amount of data that was copied into @pbuffer.
+ **/
+static int
+lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
+ int len, uint32_t drbregid)
+{
+
+ if (!pbuffer)
+ return 0;
+
+ switch (drbregid) {
+ case LPFC_DRB_EQCQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "EQCQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.EQCQDBregaddr));
+ break;
+ case LPFC_DRB_MQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "MQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.MQDBregaddr));
+ break;
+ case LPFC_DRB_WQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "WQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.WQDBregaddr));
+ break;
+ case LPFC_DRB_RQ:
+ len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+ "RQ-DRB-REG: 0x%08x\n",
+ readl(phba->sli4_hba.RQDBregaddr));
+ break;
+ default:
+ break;
+ }
+
+ return len;
+}
+
+/**
+ * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device doorbell register according
+ * to the idiag command, and copies to user @buf. Depending on the doorbell
+ * register read command setup, it does either a single doorbell register
+ * read or dump all doorbell registers.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t drb_reg_id, i;
+ char *pbuffer;
+ int len = 0;
+
+ /* This is a user read operation */
+ debug->op = LPFC_IDIAG_OP_RD;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD)
+ drb_reg_id = idiag.cmd.data[0];
+ else
+ return 0;
+
+ if (drb_reg_id == LPFC_DRB_ACC_ALL)
+ for (i = 1; i <= LPFC_DRB_MAX; i++)
+ len = lpfc_idiag_drbacc_read_reg(phba,
+ pbuffer, len, i);
+ else
+ len = lpfc_idiag_drbacc_read_reg(phba,
+ pbuffer, len, drb_reg_id);
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port doorbell register read (dump) or write
+ * (set) command accordingly. In the case of port queue read command, it sets
+ * up the command in the idiag command struct for the following debugfs read
+ * operation. In the case of port doorbell register write operation, it
+ * executes the write operation into the port doorbell register accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t drb_reg_id, value, reg_val;
+ void __iomem *drb_reg;
+ int rc;
+
+ /* This is a user write operation */
+ debug->op = LPFC_IDIAG_OP_WR;
+
+ rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+ if (rc < 0)
+ return rc;
+
+ /* Sanity check on command line arguments */
+ drb_reg_id = idiag.cmd.data[0];
+ value = idiag.cmd.data[1];
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ if (rc != LPFC_DRB_ACC_WR_CMD_ARG)
+ goto error_out;
+ if (drb_reg_id > LPFC_DRB_MAX)
+ goto error_out;
+ } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) {
+ if (rc != LPFC_DRB_ACC_RD_CMD_ARG)
+ goto error_out;
+ if ((drb_reg_id > LPFC_DRB_MAX) &&
+ (drb_reg_id != LPFC_DRB_ACC_ALL))
+ goto error_out;
+ } else
+ goto error_out;
+
+ /* Perform the write access operation */
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ switch (drb_reg_id) {
+ case LPFC_DRB_EQCQ:
+ drb_reg = phba->sli4_hba.EQCQDBregaddr;
+ break;
+ case LPFC_DRB_MQ:
+ drb_reg = phba->sli4_hba.MQDBregaddr;
+ break;
+ case LPFC_DRB_WQ:
+ drb_reg = phba->sli4_hba.WQDBregaddr;
+ break;
+ case LPFC_DRB_RQ:
+ drb_reg = phba->sli4_hba.RQDBregaddr;
+ break;
+ default:
+ goto error_out;
+ }
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR)
+ reg_val = value;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) {
+ reg_val = readl(drb_reg);
+ reg_val |= value;
+ }
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+ reg_val = readl(drb_reg);
+ reg_val &= ~value;
+ }
+ writel(reg_val, drb_reg);
+ readl(drb_reg); /* flush */
+ }
+ return nbytes;
+
+error_out:
+ /* Clean out command structure on command error out */
+ memset(&idiag, 0, sizeof(idiag));
+ return -EINVAL;
+}
+
#undef lpfc_debugfs_op_disc_trc
static const struct file_operations lpfc_debugfs_op_disc_trc = {
.owner = THIS_MODULE,
@@ -1986,6 +2425,26 @@ static const struct file_operations lpfc
.release = lpfc_idiag_release,
};
+#undef lpfc_idiag_op_queacc
+static const struct file_operations lpfc_idiag_op_queAcc = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_idiag_queacc_read,
+ .write = lpfc_idiag_queacc_write,
+ .release = lpfc_idiag_cmd_release,
+};
+
+#undef lpfc_idiag_op_drbacc
+static const struct file_operations lpfc_idiag_op_drbAcc = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_idiag_drbacc_read,
+ .write = lpfc_idiag_drbacc_write,
+ .release = lpfc_idiag_cmd_release,
+};
+
#endif
/**
@@ -2261,6 +2720,32 @@ lpfc_debugfs_initialize(struct lpfc_vpor
}
}
+ /* iDiag access PCI function queue */
+ snprintf(name, sizeof(name), "queAcc");
+ if (!phba->idiag_que_acc) {
+ phba->idiag_que_acc =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->idiag_root, phba, &lpfc_idiag_op_queAcc);
+ if (!phba->idiag_que_acc) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2926 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ }
+
+ /* iDiag access PCI function doorbell registers */
+ snprintf(name, sizeof(name), "drbAcc");
+ if (!phba->idiag_drb_acc) {
+ phba->idiag_drb_acc =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->idiag_root, phba, &lpfc_idiag_op_drbAcc);
+ if (!phba->idiag_drb_acc) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2927 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ }
+
debug_failed:
return;
#endif
@@ -2339,6 +2824,16 @@ lpfc_debugfs_terminate(struct lpfc_vport
* iDiag release
*/
if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (phba->idiag_drb_acc) {
+ /* iDiag drbAcc */
+ debugfs_remove(phba->idiag_drb_acc);
+ phba->idiag_drb_acc = NULL;
+ }
+ if (phba->idiag_que_acc) {
+ /* iDiag queAcc */
+ debugfs_remove(phba->idiag_que_acc);
+ phba->idiag_que_acc = NULL;
+ }
if (phba->idiag_que_info) {
/* iDiag queInfo */
debugfs_remove(phba->idiag_que_info);
diff -upNr a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
--- a/drivers/scsi/lpfc/lpfc_debugfs.h 2011-03-09 14:41:22.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h 2011-04-16 09:34:09.000000000 -0400
@@ -39,13 +39,42 @@
/* hbqinfo output buffer size */
#define LPFC_HBQINFO_SIZE 8192
-/* rdPciConf output buffer size */
+/* pciConf */
+#define LPFC_PCI_CFG_BROWSE 0xffff
+#define LPFC_PCI_CFG_RD_CMD_ARG 2
+#define LPFC_PCI_CFG_WR_CMD_ARG 3
#define LPFC_PCI_CFG_SIZE 4096
#define LPFC_PCI_CFG_RD_BUF_SIZE (LPFC_PCI_CFG_SIZE/2)
#define LPFC_PCI_CFG_RD_SIZE (LPFC_PCI_CFG_SIZE/4)
-/* queue info output buffer size */
-#define LPFC_QUE_INFO_GET_BUF_SIZE 2048
+/* queue info */
+#define LPFC_QUE_INFO_GET_BUF_SIZE 4096
+
+/* queue acc */
+#define LPFC_QUE_ACC_BROWSE 0xffff
+#define LPFC_QUE_ACC_RD_CMD_ARG 4
+#define LPFC_QUE_ACC_WR_CMD_ARG 6
+#define LPFC_QUE_ACC_BUF_SIZE 4096
+#define LPFC_QUE_ACC_SIZE (LPFC_QUE_ACC_BUF_SIZE/2)
+
+#define LPFC_IDIAG_EQ 1
+#define LPFC_IDIAG_CQ 2
+#define LPFC_IDIAG_MQ 3
+#define LPFC_IDIAG_WQ 4
+#define LPFC_IDIAG_RQ 5
+
+/* doorbell acc */
+#define LPFC_DRB_ACC_ALL 0xffff
+#define LPFC_DRB_ACC_RD_CMD_ARG 1
+#define LPFC_DRB_ACC_WR_CMD_ARG 2
+#define LPFC_DRB_ACC_BUF_SIZE 256
+
+#define LPFC_DRB_EQCQ 1
+#define LPFC_DRB_MQ 2
+#define LPFC_DRB_WQ 3
+#define LPFC_DRB_RQ 4
+
+#define LPFC_DRB_MAX 4
#define SIZE_U8 sizeof(uint8_t)
#define SIZE_U16 sizeof(uint16_t)
@@ -73,13 +102,23 @@ struct lpfc_idiag_offset {
uint32_t last_rd;
};
-#define LPFC_IDIAG_CMD_DATA_SIZE 4
+#define LPFC_IDIAG_CMD_DATA_SIZE 8
struct lpfc_idiag_cmd {
uint32_t opcode;
#define LPFC_IDIAG_CMD_PCICFG_RD 0x00000001
#define LPFC_IDIAG_CMD_PCICFG_WR 0x00000002
#define LPFC_IDIAG_CMD_PCICFG_ST 0x00000003
#define LPFC_IDIAG_CMD_PCICFG_CL 0x00000004
+
+#define LPFC_IDIAG_CMD_QUEACC_RD 0x00000011
+#define LPFC_IDIAG_CMD_QUEACC_WR 0x00000012
+#define LPFC_IDIAG_CMD_QUEACC_ST 0x00000013
+#define LPFC_IDIAG_CMD_QUEACC_CL 0x00000014
+
+#define LPFC_IDIAG_CMD_DRBACC_RD 0x00000021
+#define LPFC_IDIAG_CMD_DRBACC_WR 0x00000022
+#define LPFC_IDIAG_CMD_DRBACC_ST 0x00000023
+#define LPFC_IDIAG_CMD_DRBACC_CL 0x00000024
uint32_t data[LPFC_IDIAG_CMD_DATA_SIZE];
};
@@ -87,6 +126,7 @@ struct lpfc_idiag {
uint32_t active;
struct lpfc_idiag_cmd cmd;
struct lpfc_idiag_offset offset;
+ void *ptr_private;
};
#endif
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2011-03-27 11:03:17.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc.h 2011-04-16 09:34:09.000000000 -0400
@@ -805,6 +805,8 @@ struct lpfc_hba {
struct dentry *idiag_root;
struct dentry *idiag_pci_cfg;
struct dentry *idiag_que_info;
+ struct dentry *idiag_que_acc;
+ struct dentry *idiag_drb_acc;
#endif
/* Used for deferred freeing of ELS data buffers */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
