From: Karen Higgins <karen.higgins@xxxxxxxxxx>
remove ha flag AF_HBA_GOING_AWAY and added flag AF_HA_REMOVAL
to mark the other ISP-4xxx port to indicate that the driver is
being removed, so that the other port will not re-initialize
while in the process of removing the ha due to driver unload
or hba hotplug.
Signed-off-by: Karen Higgins <karen.higgins@xxxxxxxxxx>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_def.h | 5 +++-
drivers/scsi/qla4xxx/ql4_isr.c | 2 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 53 ++++++++++++++++++++++++++++++----------
4 files changed, 46 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 7aa60ee..c1f8d1b 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -53,6 +53,9 @@
#define PCI_DEVICE_ID_QLOGIC_ISP8022 0x8022
#endif
+#define ISP4XXX_PCI_FN_1 0x1
+#define ISP4XXX_PCI_FN_2 0x3
+
#define QLA_SUCCESS 0
#define QLA_ERROR 1
@@ -371,7 +374,7 @@ struct scsi_qla_host {
#define AF_LINK_UP 8 /* 0x00000100 */
#define AF_IRQ_ATTACHED 10 /* 0x00000400 */
#define AF_DISABLE_ACB_COMPLETE 11 /* 0x00000800 */
-#define AF_HBA_GOING_AWAY 12 /* 0x00001000 */
+#define AF_HA_REMOVAL 12 /* 0x00001000 */
#define AF_INTx_ENABLED 15 /* 0x00008000 */
#define AF_MSI_ENABLED 16 /* 0x00010000 */
#define AF_MSIX_ENABLED 17 /* 0x00020000 */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 2ef1a98..2f40ac7 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -801,7 +801,7 @@ irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id)
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
- if (!test_bit(AF_HBA_GOING_AWAY, &ha->flags))
+ if (!test_bit(AF_HA_REMOVAL, &ha->flags))
set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
break;
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 379df2b..199fa64 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -151,7 +151,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
if (test_bit(AF_IRQ_ATTACHED, &ha->flags) &&
test_bit(AF_INTERRUPTS_ON, &ha->flags) &&
test_bit(AF_ONLINE, &ha->flags) &&
- !test_bit(AF_HBA_GOING_AWAY, &ha->flags)) {
+ !test_bit(AF_HA_REMOVAL, &ha->flags)) {
/* Do not poll for completion. Use completion queue */
set_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags);
wait_for_completion_timeout(&ha->mbx_intr_comp, MBOX_TOV * HZ);
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 6068f80..277c45f 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -749,12 +749,6 @@ static void qla4xxx_timer(struct scsi_qla_host *ha)
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
- if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) {
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s exited. HBA GOING AWAY\n",
- __func__));
- return;
- }
-
if (is_qla8022(ha)) {
qla4_8xxx_watchdog(ha);
}
@@ -1063,7 +1057,6 @@ void qla4xxx_dead_adapter_cleanup(struct scsi_qla_host *ha)
/* Disable the board */
ql4_printk(KERN_INFO, ha, "Disabling the board\n");
- set_bit(AF_HBA_GOING_AWAY, &ha->flags);
qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
qla4xxx_mark_all_devices_missing(ha);
@@ -1255,11 +1248,6 @@ static void qla4xxx_do_dpc(struct work_struct *work)
goto do_dpc_exit;
}
- /* HBA is in the process of being permanently disabled.
- * Don't process anything */
- if (test_bit(AF_HBA_GOING_AWAY, &ha->flags))
- return;
-
if (is_qla8022(ha)) {
if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) {
qla4_8xxx_idc_lock(ha);
@@ -1824,6 +1812,44 @@ probe_disable_device:
}
/**
+ * qla4xxx_prevent_other_port_reinit - prevent other port from re-initialize
+ * @ha: pointer to adapter structure
+ *
+ * Mark the other ISP-4xxx port to indicate that the driver is being removed,
+ * so that the other port will not re-initialize while in the process of
+ * removing the ha due to driver unload or hba hotplug.
+ **/
+static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha)
+{
+ struct scsi_qla_host *other_ha = NULL;
+ struct pci_dev *other_pdev = NULL;
+ int fn = ISP4XXX_PCI_FN_2;
+
+ /*iscsi function numbers for ISP4xxx is 1 and 3*/
+ if (PCI_FUNC(ha->pdev->devfn) & BIT_1)
+ fn = ISP4XXX_PCI_FN_1;
+
+ other_pdev =
+ pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
+ ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
+ fn));
+
+ /* Get other_ha if other_pdev is valid and state is enable*/
+ if (other_pdev) {
+ if (atomic_read(&other_pdev->enable_cnt)) {
+ other_ha = pci_get_drvdata(other_pdev);
+ if (other_ha) {
+ set_bit(AF_HA_REMOVAL, &other_ha->flags);
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: "
+ "Prevent %s reinit\n", __func__,
+ dev_name(&other_ha->pdev->dev)));
+ }
+ }
+ pci_dev_put(other_pdev);
+ }
+}
+
+/**
* qla4xxx_remove_adapter - calback function to remove adapter.
* @pci_dev: PCI device pointer
**/
@@ -1833,7 +1859,8 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
ha = pci_get_drvdata(pdev);
- set_bit(AF_HBA_GOING_AWAY, &ha->flags);
+ if (!is_qla8022(ha))
+ qla4xxx_prevent_other_port_reinit(ha);
/* remove devs from iscsi_sessions to scsi_devices */
qla4xxx_free_ddb_list(ha);
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
