Martin Petersen recently sent me some patches
to add a --size (or '-s') option to lsscsi:
# lsscsi -s
[0:0:0:0] disk ATA INTEL SSD 2CV1 /dev/sda 80.0GB
[10:0:0:0] disk Linux scsi_debug 0004 /dev/sdb 1.09TB
Martin and I had several hacks at this. Getting
utilities to work reliably with sysfs across various
kernel versions continues to be a crap shoot. So
I am putting this out as a beta and hoping that
anyone with problems will contact me (or Martin).
Note that this logic decodes /sys/block/sda/size
(for example) so disks that are present but without
a block interface (e.g. physical disks in a RAID)
will not have a size shown ('-' is shown instead).
Version 0.25 beta 1 is available at:
http://sg.danny.cz/scsi/lsscsi.html
More information can be found on that page including examples
and a Download section for the tarball:
http://sg.danny.cz/scsi/lsscsi-0.25b1.tgz
There are no debian or redhat packages built for this beta.
Version 0.25 2011/03/04 [svn: r91]
- add sas_port and fc_remote_ports transport information
- print enclosure_device entry
- add '--size' option to show size of disks
- add '--protmode' option to show protection information mode
Version 0.24 2010/06/12 [svn: r83]
.....
Doug Gilbert
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
