On Tue, 1 Mar 2011 19:34:01 -0800 Nicholas A. Bellinger wrote: > From: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx> > > Add Makefile/Kconfig and update drivers/target/[Makefile,Kconfig] > to include the fabric module. > > igned-off-by: Nicholas A. Bellinger <nab@xxxxxxxxxxxxxxx> > --- > drivers/target/Kconfig | 1 + > drivers/target/Makefile | 1 + > drivers/target/iscsi/Kconfig | 17 +++++++++++++++++ > drivers/target/iscsi/Makefile | 20 ++++++++++++++++++++ > 4 files changed, 39 insertions(+), 0 deletions(-) > create mode 100644 drivers/target/iscsi/Kconfig > create mode 100644 drivers/target/iscsi/Makefile > > diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig > index 387d293..798749a 100644 > --- a/drivers/target/Kconfig > +++ b/drivers/target/Kconfig > @@ -30,5 +30,6 @@ config TCM_PSCSI > passthrough access to Linux/SCSI device > > source "drivers/target/tcm_loop/Kconfig" > +source "drivers/target/iscsi/Kconfig" > > endif > diff --git a/drivers/target/Makefile b/drivers/target/Makefile > index 60028fe..b038b7d 100644 > --- a/drivers/target/Makefile > +++ b/drivers/target/Makefile > @@ -24,3 +24,4 @@ obj-$(CONFIG_TCM_PSCSI) += target_core_pscsi.o > > # Fabric modules > obj-$(CONFIG_TCM_LOOP_FABRIC) += tcm_loop/ > +obj-$(CONFIG_ISCSI_TARGET) += iscsi/ > diff --git a/drivers/target/iscsi/Kconfig b/drivers/target/iscsi/Kconfig > new file mode 100644 > index 0000000..d1eaec4 > --- /dev/null > +++ b/drivers/target/iscsi/Kconfig > @@ -0,0 +1,17 @@ > +config ISCSI_TARGET > + tristate "Linux-iSCSI.org iSCSI Target Mode Stack" > + select CRYPTO > + select CRYPTO_CRC32C > + select CRYPTO_CRC32C_INTEL CRYPTO_CRC32C_INTEL depends on X86. so is ISCSI_TARGET only for X86, or is this kconfig just mucked up? > + help > + Say Y here to enable the ConfigFS enabled Linux-iSCSI.org iSCSI > + Target Mode Stack. > + > +if ISCSI_TARGET > + > +config ISCSI_TARGET_DEBUG > + bool "LIO-Target iscsi_debug.h ring buffer messages" > + help > + Say Y here to enable the legacy DEBUG_ISCSI macros in iscsi_debug.h > + > +endif > diff --git a/drivers/target/iscsi/Makefile b/drivers/target/iscsi/Makefile > new file mode 100644 > index 0000000..5ca883d > --- /dev/null > +++ b/drivers/target/iscsi/Makefile > @@ -0,0 +1,20 @@ > +iscsi_target_mod-y += iscsi_auth_chap.o \ > + iscsi_parameters.o \ > + iscsi_seq_and_pdu_list.o \ > + iscsi_thread_queue.o \ > + iscsi_target_datain_values.o \ > + iscsi_target_device.o \ > + iscsi_target_erl0.o \ > + iscsi_target_erl1.o \ > + iscsi_target_erl2.o \ > + iscsi_target_login.o \ > + iscsi_target_nego.o \ > + iscsi_target_nodeattrib.o \ > + iscsi_target_tmr.o \ > + iscsi_target_tpg.o \ > + iscsi_target_util.o \ > + iscsi_target.o \ > + iscsi_target_configfs.o \ > + iscsi_target_stat.o > + > +obj-$(CONFIG_ISCSI_TARGET) += iscsi_target_mod.o > -- --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
