Critical Errors:
- Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM
- Save the irq level when locking the host_lock in lpfc_findnode_did
Bug Fixes:
- Adjust payload_length and request_length for sli4_config mailbox commands.
- Add the freed sgl/XRI to the tail of the list rather than to the head.
- Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before
issuing a fdisc on an els retry.
- Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up
is LPFC_INITIALIZE_LINK.
- Add support for SLI-4 Performance Hints
Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc.h | 2 +
lpfc_attr.c | 29 ++++++++++++--
lpfc_crtn.h | 4 +-
lpfc_els.c | 3 +
lpfc_hbadisc.c | 5 +-
lpfc_hw4.h | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++--
lpfc_init.c | 113 +++++++++++++++++++++++++++++++++++++++++++--------------
lpfc_mbox.c | 16 ++++----
lpfc_scsi.c | 15 +++++++
lpfc_sli.c | 21 +++++++---
lpfc_sli4.h | 4 ++
lpfc_vport.c | 4 ++
12 files changed, 264 insertions(+), 56 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2011-02-16 11:23:50.000000000 -0500
@@ -623,10 +623,14 @@ lpfc_do_offline(struct lpfc_hba *phba, u
int status = 0;
int cnt = 0;
int i;
+ int rc;
init_completion(&online_compl);
- lpfc_workq_post_event(phba, &status, &online_compl,
+ rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_OFFLINE_PREP);
+ if (rc == 0)
+ return -ENOMEM;
+
wait_for_completion(&online_compl);
if (status != 0)
@@ -652,7 +656,10 @@ lpfc_do_offline(struct lpfc_hba *phba, u
}
init_completion(&online_compl);
- lpfc_workq_post_event(phba, &status, &online_compl, type);
+ rc = lpfc_workq_post_event(phba, &status, &online_compl, type);
+ if (rc == 0)
+ return -ENOMEM;
+
wait_for_completion(&online_compl);
if (status != 0)
@@ -682,6 +689,7 @@ lpfc_selective_reset(struct lpfc_hba *ph
{
struct completion online_compl;
int status = 0;
+ int rc;
if (!phba->cfg_enable_hba_reset)
return -EIO;
@@ -692,8 +700,11 @@ lpfc_selective_reset(struct lpfc_hba *ph
return status;
init_completion(&online_compl);
- lpfc_workq_post_event(phba, &status, &online_compl,
+ rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
+ if (rc == 0)
+ return -ENOMEM;
+
wait_for_completion(&online_compl);
if (status != 0)
@@ -812,14 +823,17 @@ lpfc_board_mode_store(struct device *dev
struct lpfc_hba *phba = vport->phba;
struct completion online_compl;
int status=0;
+ int rc;
if (!phba->cfg_enable_hba_reset)
return -EACCES;
init_completion(&online_compl);
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
- lpfc_workq_post_event(phba, &status, &online_compl,
+ rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
+ if (rc == 0)
+ return -ENOMEM;
wait_for_completion(&online_compl);
} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
@@ -1813,6 +1827,7 @@ lpfc_soft_wwpn_store(struct device *dev,
int stat1=0, stat2=0;
unsigned int i, j, cnt=count;
u8 wwpn[8];
+ int rc;
if (!phba->cfg_enable_hba_reset)
return -EACCES;
@@ -1863,7 +1878,11 @@ lpfc_soft_wwpn_store(struct device *dev,
"0463 lpfc_soft_wwpn attribute set failed to "
"reinit adapter - %d\n", stat1);
init_completion(&online_compl);
- lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE);
+ rc = lpfc_workq_post_event(phba, &stat2, &online_compl,
+ LPFC_EVT_ONLINE);
+ if (rc == 0)
+ return -ENOMEM;
+
wait_for_completion(&online_compl);
if (stat2)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff -upNr a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
--- a/drivers/scsi/lpfc/lpfc_crtn.h 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_crtn.h 2011-02-16 11:23:37.000000000 -0500
@@ -53,9 +53,9 @@ void lpfc_unreg_vpi(struct lpfc_hba *, u
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
void lpfc_supported_pages(struct lpfcMboxq *);
-void lpfc_sli4_params(struct lpfcMboxq *);
+void lpfc_pc_sli4_params(struct lpfcMboxq *);
int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
-
+int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rcv_buffers(struct lpfc_vport *);
void lpfc_rcv_seq_check_edtov(struct lpfc_vport *);
diff -upNr a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
--- a/drivers/scsi/lpfc/lpfc_els.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_els.c 2011-02-16 11:23:37.000000000 -0500
@@ -2745,7 +2745,8 @@ lpfc_els_retry_delay_handler(struct lpfc
}
break;
case ELS_CMD_FDISC:
- lpfc_issue_els_fdisc(vport, ndlp, retry);
+ if (!(vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI))
+ lpfc_issue_els_fdisc(vport, ndlp, retry);
break;
}
return;
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2010-12-11 21:56:16.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc.h 2011-02-16 11:23:37.000000000 -0500
@@ -548,6 +548,8 @@ struct lpfc_hba {
#define LPFC_SLI3_CRP_ENABLED 0x08
#define LPFC_SLI3_BG_ENABLED 0x20
#define LPFC_SLI3_DSS_ENABLED 0x40
+#define LPFC_SLI4_PERFH_ENABLED 0x80
+#define LPFC_SLI4_PHWQ_ENABLED 0x100
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
diff -upNr a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c 2011-02-16 11:23:50.000000000 -0500
@@ -4426,10 +4426,11 @@ lpfc_findnode_did(struct lpfc_vport *vpo
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp;
+ unsigned long iflags;
- spin_lock_irq(shost->host_lock);
+ spin_lock_irqsave(shost->host_lock, iflags);
ndlp = __lpfc_findnode_did(vport, did);
- spin_unlock_irq(shost->host_lock);
+ spin_unlock_irqrestore(shost->host_lock, iflags);
return ndlp;
}
diff -upNr a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
--- a/drivers/scsi/lpfc/lpfc_hw4.h 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hw4.h 2011-02-16 11:23:37.000000000 -0500
@@ -778,6 +778,7 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
+#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
/* FCoE Opcodes */
#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
@@ -1852,6 +1853,9 @@ struct lpfc_mbx_request_features {
#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT 7
#define lpfc_mbx_rq_ftr_rq_ifip_MASK 0x00000001
#define lpfc_mbx_rq_ftr_rq_ifip_WORD word2
+#define lpfc_mbx_rq_ftr_rq_perfh_SHIFT 11
+#define lpfc_mbx_rq_ftr_rq_perfh_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_perfh_WORD word2
uint32_t word3;
#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT 0
#define lpfc_mbx_rq_ftr_rsp_iaab_MASK 0x00000001
@@ -1877,6 +1881,9 @@ struct lpfc_mbx_request_features {
#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT 7
#define lpfc_mbx_rq_ftr_rsp_ifip_MASK 0x00000001
#define lpfc_mbx_rq_ftr_rsp_ifip_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_perfh_SHIFT 11
+#define lpfc_mbx_rq_ftr_rsp_perfh_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_perfh_WORD word3
};
struct lpfc_mbx_supp_pages {
@@ -1935,7 +1942,7 @@ struct lpfc_mbx_supp_pages {
#define LPFC_SLI4_PARAMETERS 2
};
-struct lpfc_mbx_sli4_params {
+struct lpfc_mbx_pc_sli4_params {
uint32_t word1;
#define qs_SHIFT 0
#define qs_MASK 0x00000001
@@ -2051,6 +2058,88 @@ struct lpfc_mbx_sli4_params {
uint32_t rsvd_13_63[51];
};
+struct lpfc_sli4_parameters {
+ uint32_t word0;
+#define cfg_prot_type_SHIFT 0
+#define cfg_prot_type_MASK 0x000000FF
+#define cfg_prot_type_WORD word0
+ uint32_t word1;
+#define cfg_ft_SHIFT 0
+#define cfg_ft_MASK 0x00000001
+#define cfg_ft_WORD word1
+#define cfg_sli_rev_SHIFT 4
+#define cfg_sli_rev_MASK 0x0000000f
+#define cfg_sli_rev_WORD word1
+#define cfg_sli_family_SHIFT 8
+#define cfg_sli_family_MASK 0x0000000f
+#define cfg_sli_family_WORD word1
+#define cfg_if_type_SHIFT 12
+#define cfg_if_type_MASK 0x0000000f
+#define cfg_if_type_WORD word1
+#define cfg_sli_hint_1_SHIFT 16
+#define cfg_sli_hint_1_MASK 0x000000ff
+#define cfg_sli_hint_1_WORD word1
+#define cfg_sli_hint_2_SHIFT 24
+#define cfg_sli_hint_2_MASK 0x0000001f
+#define cfg_sli_hint_2_WORD word1
+ uint32_t word2;
+ uint32_t word3;
+ uint32_t word4;
+#define cfg_cqv_SHIFT 14
+#define cfg_cqv_MASK 0x00000003
+#define cfg_cqv_WORD word4
+ uint32_t word5;
+ uint32_t word6;
+#define cfg_mqv_SHIFT 14
+#define cfg_mqv_MASK 0x00000003
+#define cfg_mqv_WORD word6
+ uint32_t word7;
+ uint32_t word8;
+#define cfg_wqv_SHIFT 14
+#define cfg_wqv_MASK 0x00000003
+#define cfg_wqv_WORD word8
+ uint32_t word9;
+ uint32_t word10;
+#define cfg_rqv_SHIFT 14
+#define cfg_rqv_MASK 0x00000003
+#define cfg_rqv_WORD word10
+ uint32_t word11;
+#define cfg_rq_db_window_SHIFT 28
+#define cfg_rq_db_window_MASK 0x0000000f
+#define cfg_rq_db_window_WORD word11
+ uint32_t word12;
+#define cfg_fcoe_SHIFT 0
+#define cfg_fcoe_MASK 0x00000001
+#define cfg_fcoe_WORD word12
+#define cfg_phwq_SHIFT 15
+#define cfg_phwq_MASK 0x00000001
+#define cfg_phwq_WORD word12
+#define cfg_loopbk_scope_SHIFT 28
+#define cfg_loopbk_scope_MASK 0x0000000f
+#define cfg_loopbk_scope_WORD word12
+ uint32_t sge_supp_len;
+ uint32_t word14;
+#define cfg_sgl_page_cnt_SHIFT 0
+#define cfg_sgl_page_cnt_MASK 0x0000000f
+#define cfg_sgl_page_cnt_WORD word14
+#define cfg_sgl_page_size_SHIFT 8
+#define cfg_sgl_page_size_MASK 0x000000ff
+#define cfg_sgl_page_size_WORD word14
+#define cfg_sgl_pp_align_SHIFT 16
+#define cfg_sgl_pp_align_MASK 0x000000ff
+#define cfg_sgl_pp_align_WORD word14
+ uint32_t word15;
+ uint32_t word16;
+ uint32_t word17;
+ uint32_t word18;
+ uint32_t word19;
+};
+
+struct lpfc_mbx_get_sli4_parameters {
+ struct mbox_header header;
+ struct lpfc_sli4_parameters sli4_parameters;
+};
+
/* Mailbox Completion Queue Error Messages */
#define MB_CQE_STATUS_SUCCESS 0x0
#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
@@ -2103,7 +2192,8 @@ struct lpfc_mqe {
struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
struct lpfc_mbx_query_fw_cfg query_fw_cfg;
struct lpfc_mbx_supp_pages supp_pages;
- struct lpfc_mbx_sli4_params sli4_params;
+ struct lpfc_mbx_pc_sli4_params sli4_params;
+ struct lpfc_mbx_get_sli4_parameters get_sli4_parameters;
struct lpfc_mbx_nop nop;
} un;
};
@@ -2381,6 +2471,10 @@ struct wqe_common {
#define wqe_wqes_SHIFT 15
#define wqe_wqes_MASK 0x00000001
#define wqe_wqes_WORD word10
+/* Note that this field overlaps above fields */
+#define wqe_wqid_SHIFT 1
+#define wqe_wqid_MASK 0x0000007f
+#define wqe_wqid_WORD word10
#define wqe_pri_SHIFT 16
#define wqe_pri_MASK 0x00000007
#define wqe_pri_WORD word10
@@ -2599,7 +2693,8 @@ struct fcp_iwrite64_wqe {
uint32_t total_xfer_len;
uint32_t initial_xfer_len;
struct wqe_common wqe_com; /* words 6-11 */
- uint32_t rsvd_12_15[4]; /* word 12-15 */
+ uint32_t rsrvd12;
+ struct ulp_bde64 ph_bde; /* words 13-15 */
};
struct fcp_iread64_wqe {
@@ -2608,7 +2703,8 @@ struct fcp_iread64_wqe {
uint32_t total_xfer_len; /* word 4 */
uint32_t rsrvd5; /* word 5 */
struct wqe_common wqe_com; /* words 6-11 */
- uint32_t rsvd_12_15[4]; /* word 12-15 */
+ uint32_t rsrvd12;
+ struct ulp_bde64 ph_bde; /* words 13-15 */
};
struct fcp_icmnd64_wqe {
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2011-02-16 11:23:37.000000000 -0500
@@ -4283,36 +4283,37 @@ lpfc_sli4_driver_resource_setup(struct l
goto out_free_bsmbx;
}
- /* Get the Supported Pages. It is always available. */
+ /* Get the Supported Pages if PORT_CAPABILITIES is supported by port. */
lpfc_supported_pages(mboxq);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- if (unlikely(rc)) {
- rc = -EIO;
- mempool_free(mboxq, phba->mbox_mem_pool);
- goto out_free_bsmbx;
- }
-
- mqe = &mboxq->u.mqe;
- memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
- LPFC_MAX_SUPPORTED_PAGES);
- for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
- switch (pn_page[i]) {
- case LPFC_SLI4_PARAMETERS:
- phba->sli4_hba.pc_sli4_params.supported = 1;
- break;
- default:
- break;
+ if (!rc) {
+ mqe = &mboxq->u.mqe;
+ memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
+ LPFC_MAX_SUPPORTED_PAGES);
+ for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
+ switch (pn_page[i]) {
+ case LPFC_SLI4_PARAMETERS:
+ phba->sli4_hba.pc_sli4_params.supported = 1;
+ break;
+ default:
+ break;
+ }
+ }
+ /* Read the port's SLI4 Parameters capabilities if supported. */
+ if (phba->sli4_hba.pc_sli4_params.supported)
+ rc = lpfc_pc_sli4_params_get(phba, mboxq);
+ if (rc) {
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ rc = -EIO;
+ goto out_free_bsmbx;
}
}
-
- /* Read the port's SLI4 Parameters capabilities if supported. */
- if (phba->sli4_hba.pc_sli4_params.supported)
- rc = lpfc_pc_sli4_params_get(phba, mboxq);
+ /*
+ * Get sli4 parameters that override parameters from Port capabilities.
+ * If this call fails it is not a critical error so continue loading.
+ */
+ lpfc_get_sli4_parameters(phba, mboxq);
mempool_free(mboxq, phba->mbox_mem_pool);
- if (rc) {
- rc = -EIO;
- goto out_free_bsmbx;
- }
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
if (rc)
@@ -7810,7 +7811,7 @@ lpfc_pc_sli4_params_get(struct lpfc_hba
mqe = &mboxq->u.mqe;
/* Read the port's SLI4 Parameters port capabilities */
- lpfc_sli4_params(mboxq);
+ lpfc_pc_sli4_params(mboxq);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else {
@@ -7854,6 +7855,66 @@ lpfc_pc_sli4_params_get(struct lpfc_hba
}
/**
+ * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS.
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
+ *
+ * This function is called in the SLI4 code path to read the port's
+ * sli4 capabilities.
+ *
+ * This function may be be called from any context that can block-wait
+ * for the completion. The expectation is that this routine is called
+ * typically from probe_one or from the online routine.
+ **/
+int
+lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ int rc;
+ struct lpfc_mqe *mqe = &mboxq->u.mqe;
+ struct lpfc_pc_sli4_params *sli4_params;
+ int length;
+ struct lpfc_sli4_parameters *mbx_sli4_parameters;
+
+ /* Read the port's SLI4 Config Parameters */
+ length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS,
+ length, LPFC_SLI4_MBX_EMBED);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
+ lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+ if (unlikely(rc))
+ return rc;
+ sli4_params = &phba->sli4_hba.pc_sli4_params;
+ mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
+ sli4_params->if_type = bf_get(cfg_if_type, mbx_sli4_parameters);
+ sli4_params->sli_rev = bf_get(cfg_sli_rev, mbx_sli4_parameters);
+ sli4_params->sli_family = bf_get(cfg_sli_family, mbx_sli4_parameters);
+ sli4_params->featurelevel_1 = bf_get(cfg_sli_hint_1,
+ mbx_sli4_parameters);
+ sli4_params->featurelevel_2 = bf_get(cfg_sli_hint_2,
+ mbx_sli4_parameters);
+ if (bf_get(cfg_phwq, mbx_sli4_parameters))
+ phba->sli3_options |= LPFC_SLI4_PHWQ_ENABLED;
+ else
+ phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED;
+ sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len;
+ sli4_params->loopbk_scope = bf_get(loopbk_scope, mbx_sli4_parameters);
+ sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters);
+ sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
+ sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
+ sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
+ sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
+ mbx_sli4_parameters);
+ sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
+ mbx_sli4_parameters);
+ return 0;
+}
+
+/**
* lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
diff -upNr a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
--- a/drivers/scsi/lpfc/lpfc_mbox.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_mbox.c 2011-02-16 11:23:37.000000000 -0500
@@ -1692,7 +1692,7 @@ lpfc_sli4_mbox_cmd_free(struct lpfc_hba
* @mbox: pointer to lpfc mbox command.
* @subsystem: The sli4 config sub mailbox subsystem.
* @opcode: The sli4 config sub mailbox command opcode.
- * @length: Length of the sli4 config mailbox command.
+ * @length: Length of the sli4 config mailbox command (including sub-header).
*
* This routine sets up the header fields of SLI4 specific mailbox command
* for sending IOCTL command.
@@ -1723,14 +1723,14 @@ lpfc_sli4_config(struct lpfc_hba *phba,
if (emb) {
/* Set up main header fields */
bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
- sli4_config->header.cfg_mhdr.payload_length =
- LPFC_MBX_CMD_HDR_LENGTH + length;
+ sli4_config->header.cfg_mhdr.payload_length = length;
/* Set up sub-header fields following main header */
bf_set(lpfc_mbox_hdr_opcode,
&sli4_config->header.cfg_shdr.request, opcode);
bf_set(lpfc_mbox_hdr_subsystem,
&sli4_config->header.cfg_shdr.request, subsystem);
- sli4_config->header.cfg_shdr.request.request_length = length;
+ sli4_config->header.cfg_shdr.request.request_length =
+ length - LPFC_MBX_CMD_HDR_LENGTH;
return length;
}
@@ -1902,6 +1902,7 @@ lpfc_request_features(struct lpfc_hba *p
/* Set up host requested features. */
bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+ bf_set(lpfc_mbx_rq_ftr_rq_perfh, &mboxq->u.mqe.un.req_ftrs, 1);
/* Enable DIF (block guard) only if configured to do so. */
if (phba->cfg_enable_bg)
@@ -2159,17 +2160,16 @@ lpfc_supported_pages(struct lpfcMboxq *m
}
/**
- * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params
- * mailbox command.
+ * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd.
* @mbox: pointer to lpfc mbox command to initialize.
*
* The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
* retrieve the particular SLI4 features supported by the port.
**/
void
-lpfc_sli4_params(struct lpfcMboxq *mbox)
+lpfc_pc_sli4_params(struct lpfcMboxq *mbox)
{
- struct lpfc_mbx_sli4_params *sli4_params;
+ struct lpfc_mbx_pc_sli4_params *sli4_params;
memset(mbox, 0, sizeof(*mbox));
sli4_params = &mbox->u.mqe.un.sli4_params;
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2010-12-11 21:56:16.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2011-02-16 11:23:37.000000000 -0500
@@ -1981,12 +1981,14 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hb
struct scatterlist *sgel = NULL;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ struct sli4_sge *first_data_sgl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
dma_addr_t physaddr;
uint32_t num_bde = 0;
uint32_t dma_len;
uint32_t dma_offset = 0;
int nseg;
+ struct ulp_bde64 *bde;
/*
* There are three possibilities here - use scatter-gather segment, use
@@ -2011,7 +2013,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hb
bf_set(lpfc_sli4_sge_last, sgl, 0);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl += 1;
-
+ first_data_sgl = sgl;
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
@@ -2047,6 +2049,17 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hb
dma_offset += dma_len;
sgl++;
}
+ /* setup the performance hint (first data BDE) if enabled */
+ if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
+ bde = (struct ulp_bde64 *)
+ &(iocb_cmd->unsli3.sli3Words[5]);
+ bde->addrLow = first_data_sgl->addr_lo;
+ bde->addrHigh = first_data_sgl->addr_hi;
+ bde->tus.f.bdeSize =
+ le32_to_cpu(first_data_sgl->sge_len);
+ bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bde->tus.w = cpu_to_le32(bde->tus.w);
+ }
} else {
sgl += 1;
/* clear the last flag in the fcp_rsp map entry */
diff -upNr a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
--- a/drivers/scsi/lpfc/lpfc_sli4.h 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_sli4.h 2011-02-16 11:23:37.000000000 -0500
@@ -359,6 +359,10 @@ struct lpfc_pc_sli4_params {
uint32_t hdr_pp_align;
uint32_t sgl_pages_max;
uint32_t sgl_pp_align;
+ uint8_t cqv;
+ uint8_t mqv;
+ uint8_t wqv;
+ uint8_t rqv;
};
/* SLI4 HBA data structure entries */
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2011-02-15 10:03:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2011-02-16 11:23:37.000000000 -0500
@@ -96,7 +96,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, u
/* set consumption flag every once in a while */
if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
-
+ if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
+ bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
/* Update the host index before invoking device */
@@ -969,7 +970,8 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_
} else {
sglq->state = SGL_FREED;
sglq->ndlp = NULL;
- list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+ list_add_tail(&sglq->list,
+ &phba->sli4_hba.lpfc_sgl_list);
/* Check if TXQ queue needs to be serviced */
if (pring->txq_cnt)
@@ -4817,7 +4819,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
"0378 No support for fcpi mode.\n");
ftr_rsp++;
}
-
+ if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
+ phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
+ else
+ phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
/*
* If the port cannot support the host's requested features
* then turn off the global config parameters to disable the
@@ -5004,7 +5009,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
spin_lock_irq(&phba->hbalock);
phba->link_state = LPFC_LINK_DOWN;
spin_unlock_irq(&phba->hbalock);
- rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+ if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK)
+ rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
out_unset_queue:
/* Unset all the queues set up in this routine when error out */
if (rc)
@@ -11189,7 +11195,7 @@ lpfc_rq_destroy(struct lpfc_hba *phba, s
if (!mbox)
return -ENOMEM;
length = (sizeof(struct lpfc_mbx_rq_destroy) -
- sizeof(struct mbox_header));
+ sizeof(struct lpfc_sli4_cfg_mhdr));
lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
length, LPFC_SLI4_MBX_EMBED);
@@ -11279,7 +11285,7 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba
lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
sizeof(struct lpfc_mbx_post_sgl_pages) -
- sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+ sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
&mbox->u.mqe.un.post_sgl_pages;
@@ -12402,7 +12408,8 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
sizeof(struct lpfc_mbx_post_hdr_tmpl) -
- sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+ sizeof(struct lpfc_sli4_cfg_mhdr),
+ LPFC_SLI4_MBX_EMBED);
bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
hdr_tmpl, rpi_page->page_count);
bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
diff -upNr a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
--- a/drivers/scsi/lpfc/lpfc_vport.c 2010-12-11 21:56:17.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_vport.c 2011-02-16 11:23:37.000000000 -0500
@@ -464,6 +464,7 @@ disable_vport(struct fc_vport *fc_vport)
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
long timeout;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp)
@@ -498,6 +499,9 @@ disable_vport(struct fc_vport *fc_vport)
* scsi_host_put() to release the vport.
*/
lpfc_mbx_unreg_vpi(vport);
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+ spin_unlock_irq(shost->host_lock);
lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
