[PATCH v3][SCSI] scsi_dh: propagate SCSI device deletion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Menny Hamburger <Menny_Hamburger@xxxxxxxx>

Currently, when scsi_dh_activate() returns with an error
(e.g. SCSI_DH_NOSYS) the activate_complete callback is not called and
the error is not propagated to DM mpath.

When a SCSI device attached to a device handler is deleted, userland
processes currently performing I/O on the device will have their I/O
hang forever.  

- Set SCSI_DH_NOSYS error when the handler is in the process of being
  deleted (e.g. the SCSI device is in a SDEV_CANCEL or SDEV_DEL state).

- Set SCSI_DH_DEV_OFFLINED error when device is in SDEV_OFFLINE state.

- Call the activate_complete callback function directly from
  scsi_dh_activate if an error has been set (when either the scsi_dh
  internal data has already been deleted or is in the process of being
  deleted).

The patch was tested in an iSCSI environment, RDAC H/W handler and
multipath.  In the following reproduction process, dd will I/O hang
forever and the only way to release it will be to reboot the machine:
1) Perform I/O on a multipath device:
    dd if=/dev/dm-0 of=/dev/zero bs=8k count=1000000 &
2) Delete all slave SCSI devices contained in the mpath device:
   I)  In an iSCSI environment, the easiest way to do this is by
   stopping iSCSI:
       /etc/init.d/iscsi stop
   II) Another way to delete the devices is by applying the following
   bash scriptlet:
       dm_devs=$(ls /sys/block/ | grep dm- | xargs)
       for dm_dev in $dm_devs; do
         devices=$(ls /sys/block/$dm_dev/slaves)
         for device in $devices; do
            echo 1 > /sys/block/$device/device/delete
         done
       done

NOTE: when DM mpath's fail_path uses blk_abort_queue this scsi_dh change
isn't strictly required.  However, DM mpath's call to blk_abort_queue
will soon be reverted because it has proven to be unsafe due to a race
(between blk_abort_queue and scsi_request_fn) that can lead to list
corruption.  Therefore we cannot rely on blk_abort_queue via fail_path,
but even if we could this scsi_dh change is still preferrable.

Signed-off-by: Menny Hamburger <Menny_Hamburger@xxxxxxxx>
Signed-off-by: Mike Snitzer <snitzer@xxxxxxxxxx>
---
 drivers/scsi/device_handler/scsi_dh.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)

v1 and v2 were posted/discussed on dm-devel
v3: just tweaked the patch header a bit

diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 6fae3d2..b0c56f6 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -442,12 +442,19 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
 	sdev = q->queuedata;
 	if (sdev && sdev->scsi_dh_data)
 		scsi_dh = sdev->scsi_dh_data->scsi_dh;
-	if (!scsi_dh || !get_device(&sdev->sdev_gendev))
+	if (!scsi_dh || !get_device(&sdev->sdev_gendev) ||
+	    sdev->sdev_state == SDEV_CANCEL ||
+	    sdev->sdev_state == SDEV_DEL)
 		err = SCSI_DH_NOSYS;
+	if (sdev->sdev_state == SDEV_OFFLINE)
+		err = SCSI_DH_DEV_OFFLINED;
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
-	if (err)
+	if (err) {
+		if (fn)
+			fn(data, err);
 		return err;
+	}
 
 	if (scsi_dh->activate)
 		err = scsi_dh->activate(sdev, fn, data);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux