Patch retracted for this still-born driver. Instead please use superior uasp.c which was recently submitted.
--- On Fri, 10/29/10, Luben Tuikov <ltuikov@xxxxxxxxx> wrote:
> From: Luben Tuikov <ltuikov@xxxxxxxxx>
> Subject: [PATCH] [USB] UAS: eliminate infinite loop; add debug print
> To: "Greg KH" <greg@xxxxxxxxx>, linux-usb@xxxxxxxxxxxxxxx, linux-scsi@xxxxxxxxxxxxxxx, "Matthew Wilcox" <willy@xxxxxxxxxxxxxxx>
> Date: Friday, October 29, 2010, 5:33 PM
> Eliminate an infinite loop whereby
> the SCSI layer
> would reissue a command (which would be failed by
> the driver) ad infinitum. (Invariably due to the
> driver's profuse use of the
> SCSI_MLQUEUE_DEVICE_BUSY returned result in its
> queuecommand() method.)
>
> Also add a debug option and a few debug prints.
>
> Signed-off-by: Luben Tuikov <ltuikov@xxxxxxxxx>
> ---
> drivers/usb/storage/Kconfig | 10
> ++++
> drivers/usb/storage/Makefile | 4 ++
> drivers/usb/storage/uas.c | 102
> +++++++++++++++++++++++++++--------------
> 3 files changed, 81 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/usb/storage/Kconfig
> b/drivers/usb/storage/Kconfig
> index 49a489e..eb9f6af 100644
> --- a/drivers/usb/storage/Kconfig
> +++ b/drivers/usb/storage/Kconfig
> @@ -185,6 +185,16 @@ config USB_UAS
>
> If you compile this driver as a
> module, it will be named uas.
>
> +config USB_UAS_DEBUG
> + bool "Compile in debug
> mode"
> + default n
> + depends on USB_UAS
> + help
> + Compiles the uas driver in
> debug mode. In debug mode,
> + the driver prints debug
> messages to the console.
> +
> + If unsure, say 'N'.
> +
> config USB_LIBUSUAL
> bool "The shared table of common (or
> usual) storage devices"
> depends on USB
> diff --git a/drivers/usb/storage/Makefile
> b/drivers/usb/storage/Makefile
> index fcf14cd..16715ab 100644
> --- a/drivers/usb/storage/Makefile
> +++ b/drivers/usb/storage/Makefile
> @@ -10,6 +10,10 @@ ccflags-y := -Idrivers/scsi
> obj-$(CONFIG_USB_UAS)
> += uas.o
> obj-$(CONFIG_USB_STORAGE) +=
> usb-storage.o
>
> +ifeq ($(CONFIG_USB_UAS_DEBUG),y)
> + EXTRA_CFLAGS += -DUAS_DEBUG
> +endif
> +
> usb-storage-y := scsiglue.o protocol.o transport.o usb.o
> usb-storage-y += initializers.o sierra_ms.o option_ms.o
>
> diff --git a/drivers/usb/storage/uas.c
> b/drivers/usb/storage/uas.c
> index 48dc2b8..ef6e707 100644
> --- a/drivers/usb/storage/uas.c
> +++ b/drivers/usb/storage/uas.c
> @@ -21,6 +21,14 @@
> #include <scsi/scsi_host.h>
> #include <scsi/scsi_tcq.h>
>
> +#define uas_printk(fmt, ...)
> printk(KERN_NOTICE "uas: " fmt, ## __VA_ARGS__)
> +
> +#ifdef UAS_DEBUG
> +#define UAS_DPRINTK uas_printk
> +#else
> +#define UAS_DPRINTK(fmt, ...)
> +#endif
> +
> /* Common header for all IUs */
> struct iu {
> __u8 iu_id;
> @@ -128,6 +136,7 @@ static void uas_do_work(struct
> work_struct *work)
> {
> struct uas_cmd_info *cmdinfo;
> struct list_head list;
> + int res;
>
> spin_lock_irq(&uas_work_lock);
> list_replace_init(&uas_work_list,
> &list);
> @@ -136,8 +145,10 @@ static void uas_do_work(struct
> work_struct *work)
> list_for_each_entry(cmdinfo, &list,
> list) {
> struct scsi_pointer
> *scp = (void *)cmdinfo;
> struct scsi_cmnd
> *cmnd = container_of(scp,
> -
>
> struct scsi_cmnd, SCp);
> -
> uas_submit_urbs(cmnd, cmnd->device->hostdata,
> GFP_KERNEL);
> +
>
> struct scsi_cmnd, SCp);
> + res =
> uas_submit_urbs(cmnd, cmnd->device->hostdata,
> GFP_KERNEL);
> + UAS_DPRINTK("%s:
> cmd:%p, res:%d, state:0x%x\n", __FUNCTION__,
> +
> cmnd, res, cmdinfo->state);
> }
> }
>
> @@ -198,13 +209,15 @@ static void uas_sense_old(struct urb
> *urb, struct scsi_cmnd *cmnd)
> }
>
> static void uas_xfer_data(struct urb *urb, struct
> scsi_cmnd *cmnd,
> -
>
> unsigned direction)
> +
> unsigned direction)
> {
> struct uas_cmd_info *cmdinfo = (void
> *)&cmnd->SCp;
> int err;
>
> cmdinfo->state = direction |
> SUBMIT_STATUS_URB;
> err = uas_submit_urbs(cmnd,
> cmnd->device->hostdata, GFP_ATOMIC);
> + UAS_DPRINTK("%s: cmd:%p, err:%d,
> state:0x%x\n", __FUNCTION__,
> + cmnd,
> err, cmdinfo->state);
> if (err) {
>
> spin_lock(&uas_work_lock);
>
> list_add_tail(&cmdinfo->list, &uas_work_list);
> @@ -222,7 +235,8 @@ static void uas_stat_cmplt(struct urb
> *urb)
> u16 tag;
>
> if (urb->status) {
> -
> dev_err(&urb->dev->dev, "URB BAD STATUS %d\n",
> urb->status);
> +
> dev_err(&urb->dev->dev, "%s: URB BAD STATUS
> %d\n",
> +
> __FUNCTION__, urb->status);
> usb_free_urb(urb);
> return;
> }
> @@ -259,6 +273,14 @@ static void uas_stat_cmplt(struct urb
> *urb)
> static void uas_data_cmplt(struct urb *urb)
> {
> struct scsi_data_buffer *sdb =
> urb->context;
> +
> + if (urb->status) {
> +
> dev_err(&urb->dev->dev, "%s: URB BAD STATUS
> %d\n",
> +
> __FUNCTION__, urb->status);
> + usb_free_urb(urb);
> + return;
> + }
> +
> sdb->resid = sdb->length -
> urb->actual_length;
> usb_free_urb(urb);
> }
> @@ -339,7 +361,7 @@ static struct urb
> *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
> memcpy(iu->cdb, cmnd->cmnd,
> cmnd->cmd_len);
>
> usb_fill_bulk_urb(urb, udev,
> devinfo->cmd_pipe, iu, sizeof(*iu) + len,
> -
>
> usb_free_urb, NULL);
> +
> usb_free_urb, NULL);
> urb->transfer_flags |=
> URB_FREE_BUFFER;
> out:
> return urb;
> @@ -355,23 +377,26 @@ static struct urb
> *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
> */
>
> static int uas_submit_urbs(struct scsi_cmnd *cmnd,
> -
> struct uas_dev_info
> *devinfo, gfp_t gfp)
> +
> struct uas_dev_info *devinfo, gfp_t gfp)
> {
> struct uas_cmd_info *cmdinfo = (void
> *)&cmnd->SCp;
> + int res;
>
> if (cmdinfo->state &
> ALLOC_STATUS_URB) {
>
> cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp,
> cmnd,
>
>
> cmdinfo->stream);
> if
> (!cmdinfo->status_urb)
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> return -ENOMEM;
> cmdinfo->state
> &= ~ALLOC_STATUS_URB;
> }
>
> if (cmdinfo->state &
> SUBMIT_STATUS_URB) {
> - if
> (usb_submit_urb(cmdinfo->status_urb, gfp)) {
> + res =
> usb_submit_urb(cmdinfo->status_urb, gfp);
> + if (res) {
>
> scmd_printk(KERN_INFO, cmnd,
> -
> "sense urb submission
> failure\n");
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> "sense urb submission
> failure (%d)\n",
> +
> res);
> +
> return res;
> }
> cmdinfo->state
> &= ~SUBMIT_STATUS_URB;
> }
> @@ -381,15 +406,17 @@ static int uas_submit_urbs(struct
> scsi_cmnd *cmnd,
>
>
> devinfo->data_in_pipe, cmdinfo->stream,
>
> scsi_in(cmnd),
> DMA_FROM_DEVICE);
> if
> (!cmdinfo->data_in_urb)
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> return -ENOMEM;
> cmdinfo->state
> &= ~ALLOC_DATA_IN_URB;
> }
>
> if (cmdinfo->state &
> SUBMIT_DATA_IN_URB) {
> - if
> (usb_submit_urb(cmdinfo->data_in_urb, gfp)) {
> + res =
> usb_submit_urb(cmdinfo->data_in_urb, gfp);
> + if (res) {
>
> scmd_printk(KERN_INFO, cmnd,
> -
> "data in urb
> submission failure\n");
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> "data in urb submission
> failure (%d)\n",
> +
> res);
> +
> return res;
> }
> cmdinfo->state
> &= ~SUBMIT_DATA_IN_URB;
> }
> @@ -399,15 +426,17 @@ static int uas_submit_urbs(struct
> scsi_cmnd *cmnd,
>
>
> devinfo->data_out_pipe, cmdinfo->stream,
>
> scsi_out(cmnd),
> DMA_TO_DEVICE);
> if
> (!cmdinfo->data_out_urb)
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> return -ENOMEM;
> cmdinfo->state
> &= ~ALLOC_DATA_OUT_URB;
> }
>
> if (cmdinfo->state &
> SUBMIT_DATA_OUT_URB) {
> - if
> (usb_submit_urb(cmdinfo->data_out_urb, gfp)) {
> + res =
> usb_submit_urb(cmdinfo->data_out_urb, gfp);
> + if (res) {
>
> scmd_printk(KERN_INFO, cmnd,
> -
> "data out urb
> submission failure\n");
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> "data out urb submission
> failure (%d)\n",
> +
> res);
> +
> return res;
> }
> cmdinfo->state
> &= ~SUBMIT_DATA_OUT_URB;
> }
> @@ -416,15 +445,16 @@ static int uas_submit_urbs(struct
> scsi_cmnd *cmnd,
> cmdinfo->cmd_urb
> = uas_alloc_cmd_urb(devinfo, gfp, cmnd,
>
>
> cmdinfo->stream);
> if
> (!cmdinfo->cmd_urb)
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> return -ENOMEM;
> cmdinfo->state
> &= ~ALLOC_CMD_URB;
> }
>
> if (cmdinfo->state &
> SUBMIT_CMD_URB) {
> - if
> (usb_submit_urb(cmdinfo->cmd_urb, gfp)) {
> + res =
> usb_submit_urb(cmdinfo->cmd_urb, gfp);
> + if (res) {
>
> scmd_printk(KERN_INFO, cmnd,
> -
> "cmd urb submission
> failure\n");
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> +
> "cmd urb submission failure
> (%d)\n", res);
> +
> return res;
> }
> cmdinfo->state
> &= ~SUBMIT_CMD_URB;
> }
> @@ -433,12 +463,12 @@ static int uas_submit_urbs(struct
> scsi_cmnd *cmnd,
> }
>
> static int uas_queuecommand(struct scsi_cmnd *cmnd,
> -
> void (*done)(struct
> scsi_cmnd *))
> +
> void (*done)(struct scsi_cmnd *))
> {
> struct scsi_device *sdev =
> cmnd->device;
> struct uas_dev_info *devinfo =
> sdev->hostdata;
> struct uas_cmd_info *cmdinfo = (void
> *)&cmnd->SCp;
> - int err;
> + int res;
>
> BUILD_BUG_ON(sizeof(struct
> uas_cmd_info) > sizeof(struct scsi_pointer));
>
> @@ -474,17 +504,19 @@ static int uas_queuecommand(struct
> scsi_cmnd *cmnd,
> cmdinfo->stream =
> 0;
> }
>
> - err = uas_submit_urbs(cmnd, devinfo,
> GFP_ATOMIC);
> - if (err) {
> - /* If we did
> nothing, give up now */
> - if
> (cmdinfo->state & SUBMIT_STATUS_URB) {
> -
> usb_free_urb(cmdinfo->status_urb);
> -
> return SCSI_MLQUEUE_DEVICE_BUSY;
> - }
> -
> spin_lock(&uas_work_lock);
> -
> list_add_tail(&cmdinfo->list, &uas_work_list);
> -
> spin_unlock(&uas_work_lock);
> -
> schedule_work(&uas_work);
> + res = uas_submit_urbs(cmnd, devinfo,
> GFP_ATOMIC);
> + UAS_DPRINTK("%s: cmd:%p (0x%02x),
> err:%d, state:0x%x\n", __FUNCTION__,
> + cmnd,
> cmnd->cmnd[0], res, cmdinfo->state);
> + if (res) {
> +
> usb_unlink_urb(cmdinfo->status_urb);
> +
> usb_unlink_urb(cmdinfo->data_in_urb);
> +
> usb_unlink_urb(cmdinfo->data_out_urb);
> +
> usb_unlink_urb(cmdinfo->cmd_urb);
> +
> +
> sdev->current_cmnd = NULL;
> +
> + cmnd->result =
> DID_NO_CONNECT << 16;
> + done(cmnd);
> }
>
> return 0;
> --
> 1.7.0.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
