Hi Everyone,
* James Bottomley writes:
> On Tue, 2010-11-02 at 18:11 +0100, Ralf Gerbig wrote:
>> >> Nov 2 10:40:57 gerlin1 kernel: [45977.560407] RIP: 0010:[<ffffffff811d2290>] [<ffffffff811d2290>] scsi_dispatch_cmd+0x92/0x22e
>>
>> > This is the faulting location ... could you run addr2line on this
>> > address to map it to a line of source code?
>>
>> addr2line id only say ??:0
>>
>> I recompiled vmlinux with debugging symbols, and gdb says:
>>
>> Reading symbols from /usr/src/linux-git/linux-2.6/vmlinux...done.
>> (gdb) l *(scsi_dispatch_cmd + 0x92)
>> 0xffffffff811d2290 is in scsi_dispatch_cmd (drivers/scsi/scsi.c:707).
>> 702 * We will wait MIN_RESET_DELAY clock ticks after the
>> last reset so
>> 703 * we can avoid the drive not being ready.
>> 704 */
>> 705 timeout = host->last_reset + MIN_RESET_DELAY;
>> 706
>> 707 if (host->resetting && time_before(jiffies, timeout)) {
>> 708 int ticks_remaining = timeout - jiffies;
>> 709 /*
>> 710 * NOTE: This may be executed from within an interrupt
>> 711 * handler! This is bad, but for now, it'll do. The irq
> Um, that's bad. It's saying the junk pointer is host on line 707 but
> when it was dereferenced on line 705 it was fine. This is most likely
> to indicate either memory corruption (another thread overwrote the host
> location or even a hardware fault).
just to wrap this up: you where right, the commits between
2.6.36-rc8-00045-g51ea8a8 and 2.6.36 where not at fault, as
the former also crashed after 11 days.
Without any bright, or even dim, ideas I changed -Os to -O2
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
and 2.6.36 runs without problems since Nov. 14th.
Thanks for caring,
Ralf
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
