From: Mike Hernandez <michael.hernandez@xxxxxxxxxx> Use the host_to_fcp_swap call to correctly populate the LUN field in the Command Type 6 path. This field is used during LUN reset cleanup and must match the field used in the FCP command. Cc: stable@xxxxxxxxxx Signed-off-by: Mike Hernandez <michael.hernandez@xxxxxxxxxx> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@xxxxxxxxxx> --- drivers/scsi/qla2xxx/qla_iocb.c | 1 + drivers/scsi/qla2xxx/qla_nx.c | 1 + 2 files changed, 2 insertions(+), 0 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 5f94430..4c1ba62 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1061,6 +1061,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, fcp_cmnd->additional_cdb_len |= 2; int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); + host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun)); memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 8d9edfb..ae2acac 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2749,6 +2749,7 @@ sufficient_dsds: goto queuing_error_fcp_cmnd; int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); /* build FCP_CMND IU */ memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); -- 1.6.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
