- Add the Lancer FC and FCoE PCI IDs
- Add new SLI4 INTF register definitions
- Implement new SLI4 doorbell register
Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc_hw.h | 6 +-
lpfc_hw4.h | 128 ++++++++++++++++++++++++++++++++++++++++++++++++++----------
lpfc_init.c | 48 +++++++++++++++++-----
3 files changed, 149 insertions(+), 33 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
--- a/drivers/scsi/lpfc/lpfc_hw4.h 2010-11-12 12:14:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hw4.h 2010-11-19 16:10:18.000000000 -0500
@@ -64,29 +64,39 @@ struct lpfc_sli_intf {
#define lpfc_sli_intf_valid_MASK 0x00000007
#define lpfc_sli_intf_valid_WORD word0
#define LPFC_SLI_INTF_VALID 6
-#define lpfc_sli_intf_featurelevel2_SHIFT 24
-#define lpfc_sli_intf_featurelevel2_MASK 0x0000001F
-#define lpfc_sli_intf_featurelevel2_WORD word0
-#define lpfc_sli_intf_featurelevel1_SHIFT 16
-#define lpfc_sli_intf_featurelevel1_MASK 0x000000FF
-#define lpfc_sli_intf_featurelevel1_WORD word0
-#define LPFC_SLI_INTF_FEATURELEVEL1_1 1
-#define LPFC_SLI_INTF_FEATURELEVEL1_2 2
+#define lpfc_sli_intf_sli_hint2_SHIFT 24
+#define lpfc_sli_intf_sli_hint2_MASK 0x0000001F
+#define lpfc_sli_intf_sli_hint2_WORD word0
+#define LPFC_SLI_INTF_SLI_HINT2_NONE 0
+#define lpfc_sli_intf_sli_hint1_SHIFT 16
+#define lpfc_sli_intf_sli_hint1_MASK 0x000000FF
+#define lpfc_sli_intf_sli_hint1_WORD word0
+#define LPFC_SLI_INTF_SLI_HINT1_NONE 0
+#define LPFC_SLI_INTF_SLI_HINT1_1 1
+#define LPFC_SLI_INTF_SLI_HINT1_2 2
+#define lpfc_sli_intf_if_type_SHIFT 12
+#define lpfc_sli_intf_if_type_MASK 0x0000000F
+#define lpfc_sli_intf_if_type_WORD word0
+#define LPFC_SLI_INTF_IF_TYPE_0 0
+#define LPFC_SLI_INTF_IF_TYPE_1 1
+#define LPFC_SLI_INTF_IF_TYPE_2 2
#define lpfc_sli_intf_sli_family_SHIFT 8
-#define lpfc_sli_intf_sli_family_MASK 0x000000FF
+#define lpfc_sli_intf_sli_family_MASK 0x0000000F
#define lpfc_sli_intf_sli_family_WORD word0
-#define LPFC_SLI_INTF_FAMILY_BE2 0
-#define LPFC_SLI_INTF_FAMILY_BE3 1
+#define LPFC_SLI_INTF_FAMILY_BE2 0x0
+#define LPFC_SLI_INTF_FAMILY_BE3 0x1
+#define LPFC_SLI_INTF_FAMILY_LNCR_A0 0xa
+#define LPFC_SLI_INTF_FAMILY_LNCR_B0 0xb
#define lpfc_sli_intf_slirev_SHIFT 4
#define lpfc_sli_intf_slirev_MASK 0x0000000F
#define lpfc_sli_intf_slirev_WORD word0
#define LPFC_SLI_INTF_REV_SLI3 3
#define LPFC_SLI_INTF_REV_SLI4 4
-#define lpfc_sli_intf_if_type_SHIFT 0
-#define lpfc_sli_intf_if_type_MASK 0x00000007
-#define lpfc_sli_intf_if_type_WORD word0
-#define LPFC_SLI_INTF_IF_TYPE_0 0
-#define LPFC_SLI_INTF_IF_TYPE_1 1
+#define lpfc_sli_intf_func_type_SHIFT 0
+#define lpfc_sli_intf_func_type_MASK 0x00000001
+#define lpfc_sli_intf_func_type_WORD word0
+#define LPFC_SLI_INTF_IF_TYPE_PHYS 0
+#define LPFC_SLI_INTF_IF_TYPE_VIRT 1
};
#define LPFC_SLI4_MBX_EMBED true
@@ -450,13 +460,15 @@ struct lpfc_register {
uint32_t word0;
};
+/* The SLI4 INTF register offset is common to all if_type values. */
+#define LPFC_SLI_INTF 0x0058
+
+/* The following BAR0 Registers apply to SLI4 if_type 0 UCNAs. */
#define LPFC_UERR_STATUS_HI 0x00A4
#define LPFC_UERR_STATUS_LO 0x00A0
#define LPFC_UE_MASK_HI 0x00AC
#define LPFC_UE_MASK_LO 0x00A8
-#define LPFC_SLI_INTF 0x0058
-/* BAR0 Registers */
#define LPFC_HST_STATE 0x00AC
#define lpfc_hst_state_perr_SHIFT 31
#define lpfc_hst_state_perr_MASK 0x1
@@ -480,6 +492,10 @@ struct lpfc_register {
#define lpfc_hst_state_port_status_MASK 0xFFFF
#define lpfc_hst_state_port_status_WORD word0
+/*
+ * The following Port Status Values apply to SLI4, if_type 0 and 2
+ * UCNAs.
+ */
#define LPFC_POST_STAGE_POWER_ON_RESET 0x0000
#define LPFC_POST_STAGE_AWAITING_HOST_RDY 0x0001
#define LPFC_POST_STAGE_HOST_RDY 0x0002
@@ -514,6 +530,64 @@ struct lpfc_register {
#define LPFC_POST_STAGE_ARMFW_READY 0xC000
#define LPFC_POST_STAGE_ARMFW_UE 0xF000
+
+/* The following BAR0 register sets are defined for if_type 2 UCNAs. */
+#define LPFC_SLIPORT_SEMAPHORE 0x0400
+#define lpfc_sliport_smphr_perr_SHIFT 31
+#define lpfc_sliport_smphr_perr_MASK 0x1
+#define lpfc_sliport_smphr_perr_WORD word0
+#define lpfc_sliport_smphr_sfi_SHIFT 30
+#define lpfc_sliport_smphr_sfi_MASK 0x1
+#define lpfc_sliport_smphr_sfi_WORD word0
+#define lpfc_sliport_smphr_nip_SHIFT 29
+#define lpfc_sliport_smphr_nip_MASK 0x1
+#define lpfc_sliport_smphr_nip_WORD word0
+#define lpfc_sliport_smphr_ipc_SHIFT 28
+#define lpfc_sliport_smphr_ipc_MASK 0x1
+#define lpfc_sliport_smphr_ipc_WORD word0
+#define lpfc_sliport_smphr_scr1_SHIFT 27
+#define lpfc_sliport_smphr_scr1_MASK 0x1
+#define lpfc_sliport_smphr_scr1_WORD word0
+#define lpfc_sliport_smphr_scr2_SHIFT 26
+#define lpfc_sliport_smphr_scr2_MASK 0x1
+#define lpfc_sliport_smphr_scr2_WORD word0
+#define lpfc_sliport_smphr_host_scratch_SHIFT 16
+#define lpfc_sliport_smphr_host_scratch_MASK 0xFF
+#define lpfc_sliport_smphr_host_scratch_WORD word0
+#define lpfc_sliport_smphr_port_status_SHIFT 0
+#define lpfc_sliport_smphr_port_status_MASK 0xFFFF
+#define lpfc_sliport_smphr_port_status_WORD word0
+
+#define LPFC_SLIPORT_STATUS 0x0404
+#define lpfc_sliport_status_err_SHIFT 31
+#define lpfc_sliport_status_err_MASK 0x1
+#define lpfc_sliport_status_err_WORD word0
+#define lpfc_sliport_status_end_SHIFT 30
+#define lpfc_sliport_status_end_MASK 0x1
+#define lpfc_sliport_status_end_WORD word0
+#define lpfc_sliport_status_oti_SHIFT 29
+#define lpfc_sliport_status_oti_MASK 0x1
+#define lpfc_sliport_status_oti_WORD word0
+#define lpfc_sliport_status_rn_SHIFT 24
+#define lpfc_sliport_status_rn_MASK 0x1
+#define lpfc_sliport_status_rn_WORD word0
+#define lpfc_sliport_status_rdy_SHIFT 23
+#define lpfc_sliport_status_rdy_MASK 0x1
+#define lpfc_sliport_status_rdy_WORD word0
+
+#define LPFC_SLIPORT_CONTROL 0x0408
+#define lpfc_sliport_ctrl_end_SHIFT 30
+#define lpfc_sliport_ctrl_end_MASK 0x1
+#define lpfc_sliport_ctrl_end_WORD word0
+#define LPFC_SLIPORT_LITTLE_ENDIAN 0
+#define LPFC_SLIPORT_BIG_ENDIAN 1
+#define lpfc_sliport_ctrl_ip_SHIFT 27
+#define lpfc_sliport_ctrl_ip_MASK 0x1
+#define lpfc_sliport_ctrl_ip_WORD word0
+
+#define LPFC_SLIPORT_ERROR_1 0x040C
+#define LPFC_SLIPORT_ERROR_2 0x0410
+
/* BAR1 Registers */
#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
@@ -569,14 +643,21 @@ struct lpfc_register {
#define LPFC_SLI4_INTR30 BIT30
#define LPFC_SLI4_INTR31 BIT31
-/* BAR2 Registers */
+/*
+ * The Doorbell registers defined here exist in different BAR
+ * register sets depending on the UCNA Port's reported if_type
+ * value. For UCNA ports running SLI4 and if_type 0, they reside in
+ * BAR2. For UCNA ports running SLI4 and if_type 2, they reside in
+ * BAR0. The offsets are the same so the driver must account for
+ * any base address difference.
+ */
#define LPFC_RQ_DOORBELL 0x00A0
#define lpfc_rq_doorbell_num_posted_SHIFT 16
#define lpfc_rq_doorbell_num_posted_MASK 0x3FFF
#define lpfc_rq_doorbell_num_posted_WORD word0
#define LPFC_RQ_POST_BATCH 8 /* RQEs to post at one time */
#define lpfc_rq_doorbell_id_SHIFT 0
-#define lpfc_rq_doorbell_id_MASK 0x03FF
+#define lpfc_rq_doorbell_id_MASK 0xFFFF
#define lpfc_rq_doorbell_id_WORD word0
#define LPFC_WQ_DOORBELL 0x0040
@@ -591,6 +672,11 @@ struct lpfc_register {
#define lpfc_wq_doorbell_id_WORD word0
#define LPFC_EQCQ_DOORBELL 0x0120
+#define lpfc_eqcq_doorbell_se_SHIFT 31
+#define lpfc_eqcq_doorbell_se_MASK 0x0001
+#define lpfc_eqcq_doorbell_se_WORD word0
+#define LPFC_EQCQ_SOLICIT_ENABLE_OFF 0
+#define LPFC_EQCQ_SOLICIT_ENABLE_ON 1
#define lpfc_eqcq_doorbell_arm_SHIFT 29
#define lpfc_eqcq_doorbell_arm_MASK 0x0001
#define lpfc_eqcq_doorbell_arm_WORD word0
@@ -628,7 +714,7 @@ struct lpfc_register {
#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
#define lpfc_mq_doorbell_num_posted_WORD word0
#define lpfc_mq_doorbell_id_SHIFT 0
-#define lpfc_mq_doorbell_id_MASK 0x03FF
+#define lpfc_mq_doorbell_id_MASK 0xFFFF
#define lpfc_mq_doorbell_id_WORD word0
struct lpfc_sli4_cfg_mhdr {
diff -upNr a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
--- a/drivers/scsi/lpfc/lpfc_hw.h 2010-11-12 12:14:48.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hw.h 2010-11-19 16:10:17.000000000 -0500
@@ -1172,7 +1172,10 @@ typedef struct {
#define PCI_VENDOR_ID_EMULEX 0x10df
#define PCI_DEVICE_ID_FIREFLY 0x1ae5
#define PCI_DEVICE_ID_PROTEUS_VF 0xe100
+#define PCI_DEVICE_ID_BALIUS 0xe131
#define PCI_DEVICE_ID_PROTEUS_PF 0xe180
+#define PCI_DEVICE_ID_LANCER_FC 0xe200
+#define PCI_DEVICE_ID_LANCER_FCOE 0xe260
#define PCI_DEVICE_ID_SAT_SMB 0xf011
#define PCI_DEVICE_ID_SAT_MID 0xf015
#define PCI_DEVICE_ID_RFLY 0xf095
@@ -1189,6 +1192,7 @@ typedef struct {
#define PCI_DEVICE_ID_SAT 0xf100
#define PCI_DEVICE_ID_SAT_SCSP 0xf111
#define PCI_DEVICE_ID_SAT_DCSP 0xf112
+#define PCI_DEVICE_ID_FALCON 0xf180
#define PCI_DEVICE_ID_SUPERFLY 0xf700
#define PCI_DEVICE_ID_DRAGONFLY 0xf800
#define PCI_DEVICE_ID_CENTAUR 0xf900
@@ -1210,8 +1214,6 @@ typedef struct {
#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
#define PCI_DEVICE_ID_TIGERSHARK 0x0704
#define PCI_DEVICE_ID_TOMCAT 0x0714
-#define PCI_DEVICE_ID_FALCON 0xf180
-#define PCI_DEVICE_ID_BALIUS 0xe131
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2010-11-19 16:08:26.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2010-11-19 16:10:18.000000000 -0500
@@ -1853,6 +1853,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba
m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
"Fibre Channel Adapter"};
break;
+ case PCI_DEVICE_ID_LANCER_FC:
+ oneConnect = 1;
+ m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"};
+ break;
+ case PCI_DEVICE_ID_LANCER_FCOE:
+ oneConnect = 1;
+ m = (typeof(m)){"Undefined", "PCIe", "FCoE"};
+ break;
default:
m = (typeof(m)){"Unknown", "", ""};
break;
@@ -3950,7 +3958,7 @@ lpfc_sli4_driver_resource_setup(struct l
int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
- int longs;
+ int longs, sli_family;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4012,12 +4020,22 @@ lpfc_sli4_driver_resource_setup(struct l
*/
buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
- /* Feature Level 1 hardware is limited to 2 pages */
- if ((bf_get(lpfc_sli_intf_featurelevel1, &phba->sli4_hba.sli_intf) ==
- LPFC_SLI_INTF_FEATURELEVEL1_1))
- max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
- else
- max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+
+ sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
+ max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+ switch (sli_family) {
+ case LPFC_SLI_INTF_FAMILY_BE2:
+ case LPFC_SLI_INTF_FAMILY_BE3:
+ /* There is a single hint for BE - 2 pages per BPL. */
+ if (bf_get(lpfc_sli_intf_sli_hint1, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_SLI_HINT1_1)
+ max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
+ break;
+ case LPFC_SLI_INTF_FAMILY_LNCR_A0:
+ case LPFC_SLI_INTF_FAMILY_LNCR_B0:
+ default:
+ break;
+ }
for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
dma_buf_size < max_buf_size && buf_size > dma_buf_size;
dma_buf_size = dma_buf_size << 1)
@@ -5233,16 +5251,22 @@ lpfc_sli4_post_status_check(struct lpfc_
&phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_VALID) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
- "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ "IFType=0x%x, SLIHint_1=0x%x, SLIHint_2=0x%x, "
+ "FT=0x%x\n",
bf_get(lpfc_sli_intf_sli_family,
&phba->sli4_hba.sli_intf),
bf_get(lpfc_sli_intf_slirev,
&phba->sli4_hba.sli_intf),
- bf_get(lpfc_sli_intf_featurelevel1,
+ bf_get(lpfc_sli_intf_if_type,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_sli_hint1,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_sli_hint2,
&phba->sli4_hba.sli_intf),
- bf_get(lpfc_sli_intf_featurelevel2,
+ bf_get(lpfc_sli_intf_func_type,
&phba->sli4_hba.sli_intf));
}
+
phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
@@ -8992,6 +9016,10 @@ static struct pci_device_id lpfc_id_tabl
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BALIUS,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
