[PATCH v2 04/14] BNX2I: Fixed a cid leak issue for 5771X (10g)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A cid leak issue was found when the connect destroy request exceeded
the driver's disconnection timeout.  This will lead to a cid resource
leak issue.
The fix is to allow the cid cleanup even when this happens.

Signed-off-by: Eddie Wai <eddie.wai@xxxxxxxxxxxx>
Acked-by: Anil Veerabhadrappa <anilgv@xxxxxxxxxxxx>
Reviewed-by: Michael Chan <mchan@xxxxxxxxxxxx>
---
 drivers/scsi/bnx2i/bnx2i_iscsi.c |   24 ++++++++++++++++--------
 1 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index fb50efb..b766812 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1640,18 +1640,26 @@ no_nx2_route:
 static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 				 struct bnx2i_endpoint *ep)
 {
-	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) && ep->cm_sk)
 		hba->cnic->cm_destroy(ep->cm_sk);
 
-	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
-		ep->state = EP_STATE_DISCONN_COMPL;
-
 	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
 	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
-		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
-				  " NW/PCIe trace, driver msgs to developers"
-				  " for analysis\n");
-		return 1;
+		if (ep->conn && ep->conn->cls_conn &&
+		    ep->conn->cls_conn->dd_data) {
+			struct iscsi_conn *conn = ep->conn->cls_conn->dd_data;
+
+			/* Must suspend all rx queue activity for this ep */
+			set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+		}
+		/* CONN_DISCONNECT timeout may or may not be an issue depending
+		 * on what transcribed in TCP layer, different targets behave
+		 * differently
+		 */
+		printk(KERN_ALERT "bnx2i (%s): - WARN - CONN_DISCON timed out, "
+				  "please submit GRC Dump, NW/PCIe trace, "
+				  "driver msgs to developers for analysis\n",
+				  hba->netdev->name);
 	}
 
 	ep->state = EP_STATE_CLEANUP_START;
-- 
1.7.0.5


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux