https://bugzilla.kernel.org/show_bug.cgi?id=22512 Summary: no disks are found at driver start after upgrate from 2.6.35.8 to 2.6.36 Product: SCSI Drivers Version: 2.5 Kernel Version: 2.6.36 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: blocking Priority: P1 Component: QLOGIC QLA2XXX AssignedTo: scsi_drivers-qla2xxx@xxxxxxxxxxxxxxxxxxxx ReportedBy: cunio@xxxxxxxx Regression: Yes Driver loads without errors but after messages: [ 993.976622] qla2xxx 0000:0c:00.0: LIP reset occurred (f700). [ 993.996537] qla2xxx 0000:0c:00.0: LIP occurred (f700). [ 993.996690] qla2xxx 0000:0c:00.0: LIP reset occurred (f7f7). [ 995.027739] qla2xxx 0000:0c:00.0: LOOP UP detected (4 Gbps). [ 995.620024] qla2xxx 0000:0c:00.0: [ 995.620026] QLogic Fibre Channel HBA Driver: 8.03.04-k0 [ 995.620027] QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA [ 995.620028] ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+, host#=14, fw=5.03.07 (496) No disks are detected Previous kernel detects: [ 4.017172] scsi 1:0:0:0: Direct-Access IBM 1814 FAStT 0916 PQ: 0 ANSI: 5 [ 4.017576] sd 1:0:0:0: Attached scsi generic sg3 type 0 [ 4.017702] sd 1:0:0:0: Embedded Enclosure Device [ 4.018413] sd 1:0:0:0: [sdb] 838860800 512-byte logical blocks: (429 GB/400 GiB) [ 4.019311] sd 1:0:0:0: [sdb] Write Protect is off [ 4.019444] sd 1:0:0:0: [sdb] Mode Sense: 77 00 10 08 [ 4.019842] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA and many others driver is compiled as module -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
