[PATCH 2/2] ipr: fix mailbox register definition and add a delay before reading

[Wayne Boyer <wayneb@xxxxxxxxxxxxxxxxxx>]

The definition for the mailbox register for new adapters was incorrect.  The
value has been updated to the correct offset.

After an adapter reset, the mailbox register on the new adapters takes a
number of seconds to stabilize.  A delay has been added before reading the
register.

Signed-off-by: Wayne Boyer <wayneb@xxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/ipr.c |   47 +++++++++++++++++++++++++++++++++++++++++------
 drivers/scsi/ipr.h |    2 ++
 2 files changed, 43 insertions(+), 6 deletions(-)

Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c	2010-11-04 09:16:05.000000000 -0700
+++ b/drivers/scsi/ipr.c	2010-11-04 09:16:48.000000000 -0700
@@ -146,7 +146,7 @@ static const struct ipr_chip_cfg_t ipr_c
 		}
 	},
 	{ /* CRoC */
-		.mailbox = 0x00040,
+		.mailbox = 0x00044,
 		.cache_line_size = 0x20,
 		{
 			.set_interrupt_mask_reg = 0x00010,
@@ -2900,6 +2900,12 @@ static void ipr_get_ioa_dump(struct ipr_
 		return;
 	}

+	if (ioa_cfg->sis64) {
+		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+		ssleep(IPR_DUMP_DELAY_SECONDS);
+		spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	}
+
 	start_addr = readl(ioa_cfg->ioa_mailbox);

 	if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(start_addr)) {
@@ -7470,6 +7476,29 @@ static void ipr_get_unit_check_buffer(st
 }

 /**
+ * ipr_reset_get_unit_check_job - Call to get the unit check buffer.
+ * @ipr_cmd:	ipr command struct
+ *
+ * Description: This function will call to get the unit check buffer.
+ *
+ * Return value:
+ *	IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+	ENTER;
+	ioa_cfg->ioa_unit_checked = 0;
+	ipr_get_unit_check_buffer(ioa_cfg);
+	ipr_cmd->job_step = ipr_reset_alert;
+	ipr_reset_start_timer(ipr_cmd, 0);
+
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
+/**
  * ipr_reset_restore_cfg_space - Restore PCI config space.
  * @ipr_cmd:	ipr command struct
  *
@@ -7509,11 +7538,17 @@ static int ipr_reset_restore_cfg_space(s
 	}

 	if (ioa_cfg->ioa_unit_checked) {
-		ioa_cfg->ioa_unit_checked = 0;
-		ipr_get_unit_check_buffer(ioa_cfg);
-		ipr_cmd->job_step = ipr_reset_alert;
-		ipr_reset_start_timer(ipr_cmd, 0);
-		return IPR_RC_JOB_RETURN;
+		if (ioa_cfg->sis64) {
+			ipr_cmd->job_step = ipr_reset_get_unit_check_job;
+			ipr_reset_start_timer(ipr_cmd, IPR_DUMP_DELAY_TIMEOUT);
+			return IPR_RC_JOB_RETURN;
+		} else {
+			ioa_cfg->ioa_unit_checked = 0;
+			ipr_get_unit_check_buffer(ioa_cfg);
+			ipr_cmd->job_step = ipr_reset_alert;
+			ipr_reset_start_timer(ipr_cmd, 0);
+			return IPR_RC_JOB_RETURN;
+		}
 	}

 	if (ioa_cfg->in_ioa_bringdown) {
Index: b/drivers/scsi/ipr.h
===================================================================
--- a/drivers/scsi/ipr.h	2010-11-04 09:16:05.000000000 -0700
+++ b/drivers/scsi/ipr.h	2010-11-04 09:16:48.000000000 -0700
@@ -218,6 +218,8 @@
 #define IPR_WAIT_FOR_BIST_TIMEOUT		(2 * HZ)
 #define IPR_PCI_RESET_TIMEOUT			(HZ / 2)
 #define IPR_DUMP_TIMEOUT			(15 * HZ)
+#define IPR_DUMP_DELAY_SECONDS			4
+#define IPR_DUMP_DELAY_TIMEOUT			(IPR_DUMP_DELAY_SECONDS * HZ)

 /*
  * SCSI Literals

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html