Highpoint arent very good at the moment with linux support which is a disappointment...good luck. On Fri, Oct 29, 2010 at 1:24 PM, Benjamin LaHaise <bcrl@xxxxxxxxx> wrote: > Hello all, > > On Wed, Oct 20, 2010 at 06:31:10PM -0400, Benjamin LaHaise wrote: >> I recently built a system using the HighPoint 2720 SAS controller, which >> is based on the Marvell 88SE9485. In my limited testing (read: it boots), >> the following patch is needed to get mvsas to recognize the board. With >> this patch, the system boots without issue and SATA passthrough seems to >> work. Note that I have not tested the board with any SAS drives, as I >> only have SATA drives at present. Any thoughts/comments on if anything >> further is needed for this board? > > No luck with this. Under testing it eventually starts reporting bad > sectors on writes. Does anyone have any pointers for docs on the mvsas > chips that I could use for debugging this? For that matter, am I using > the right description for the 88SE9485? > > -ben > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html