Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
Signed-off-by: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
Signed-off-by: Ravi Anand <ravi.anand@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_nx.c | 17 -----------------
drivers/scsi/qla4xxx/ql4_nx.h | 3 ---
2 files changed, 0 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 66946d8..2dd4d4c 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1080,21 +1080,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
return 0;
}
-static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha)
-{
- u32 val = 0;
- val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ;
- val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
- if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
- printk("Memory DIMM SPD not programmed. Assumed valid.\n");
- return 1;
- } else if (val) {
- printk("Memory DIMM type incorrect. Info:%08X.\n", val);
- return 2;
- }
- return 0;
-}
-
static int
qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
{
@@ -1379,8 +1364,6 @@ static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val)
} while (--retries);
- qla4_8xxx_check_for_bad_spd(ha);
-
if (!retries) {
pegtune_val = qla4_8xxx_rd_32(ha,
QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index 429df5e..a0f7782 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -24,7 +24,6 @@
#define CRB_CMDPEG_STATE QLA82XX_REG(0x50)
#define CRB_RCVPEG_STATE QLA82XX_REG(0x13c)
-#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54)
#define CRB_DMA_SHIFT QLA82XX_REG(0xcc)
#define QLA82XX_HW_H0_CH_HUB_ADR 0x05
@@ -529,8 +528,6 @@
# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000)
# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg))
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff
#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24))
#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8))
#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac))
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
