From: Shyam Sundar <shyam.sundar@xxxxxxxxxx>
Switching from doorbell mechanism to CRB register based
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@xxxxxxxxxx>
Signed-off-by: Shyam Sundar <shyam.sundar@xxxxxxxxxx>
Signed-off-by: Ravi Anand <ravi.anand@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_fw.h | 1 +
drivers/scsi/qla4xxx/ql4_iocb.c | 10 +---------
drivers/scsi/qla4xxx/ql4_mbx.c | 9 +++++++++
drivers/scsi/qla4xxx/ql4_nx.h | 2 ++
drivers/scsi/qla4xxx/ql4_os.c | 24 +++---------------------
5 files changed, 16 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index d65dac4..5e757d7 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -448,6 +448,7 @@ struct addr_ctrl_blk {
#define FWOPT_SESSION_MODE 0x0040
#define FWOPT_INITIATOR_MODE 0x0020
#define FWOPT_TARGET_MODE 0x0010
+#define FWOPT_ENABLE_CRBDB 0x8000
uint16_t exec_throttle; /* 04-05 */
uint8_t zio_count; /* 06 */
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 4ef9ba1..5ae49fd 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -202,19 +202,11 @@ static void qla4xxx_build_scsi_iocbs(struct srb *srb,
void qla4_8xxx_queue_iocb(struct scsi_qla_host *ha)
{
uint32_t dbval = 0;
- unsigned long wtime;
dbval = 0x14 | (ha->func_num << 5);
dbval = dbval | (0 << 8) | (ha->request_in << 16);
- writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr);
- wmb();
- wtime = jiffies + (2 * HZ);
- while (readl((void __iomem *)ha->nx_db_rd_ptr) != dbval &&
- !time_after_eq(jiffies, wtime)) {
- writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr);
- wmb();
- }
+ qla4_8xxx_wr_32(ha, ha->nx_db_wr_ptr, ha->request_in);
}
/**
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 494a28f..2d2f9c8 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -299,6 +299,10 @@ qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
{
memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+
+ if (is_qla8022(ha))
+ qla4_8xxx_wr_32(ha, ha->nx_db_wr_ptr, 0);
+
mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
mbox_cmd[1] = 0;
mbox_cmd[2] = LSDW(init_fw_cb_dma);
@@ -472,6 +476,11 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
init_fw_cb->fw_options |=
__constant_cpu_to_le16(FWOPT_SESSION_MODE |
FWOPT_INITIATOR_MODE);
+
+ if (is_qla8022(ha))
+ init_fw_cb->fw_options |=
+ __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB);
+
init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index 85fe6cf..429df5e 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -535,6 +535,8 @@
#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8))
#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac))
#define QLA82XX_PEG_ALIVE_COUNTER (QLA82XX_CAM_RAM(0xb0))
+#define QLA82XX_CAM_RAM_DB1 (QLA82XX_CAM_RAM(0x1b0))
+#define QLA82XX_CAM_RAM_DB2 (QLA82XX_CAM_RAM(0x1b4))
#define HALT_STATUS_UNRECOVERABLE 0x80000000
#define HALT_STATUS_RECOVERABLE 0x40000000
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 57890b6..779745f 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -571,10 +571,6 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
if (ha->nx_pcibase)
iounmap(
(struct device_reg_82xx __iomem *)ha->nx_pcibase);
-
- if (ha->nx_db_wr_ptr)
- iounmap(
- (struct device_reg_82xx __iomem *)ha->nx_db_wr_ptr);
} else if (ha->reg)
iounmap(ha->reg);
pci_release_regions(ha->pdev);
@@ -1476,24 +1472,10 @@ int qla4_8xxx_iospace_config(struct scsi_qla_host *ha)
db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */
db_len = pci_resource_len(pdev, 4);
- /* mapping of doorbell write pointer */
- ha->nx_db_wr_ptr = (unsigned long)ioremap(db_base +
- (ha->pdev->devfn << 12), 4);
- if (!ha->nx_db_wr_ptr) {
- printk(KERN_ERR
- "cannot remap MMIO doorbell-write (%s), aborting\n",
- pci_name(pdev));
- goto iospace_error_exit;
- }
- /* mapping of doorbell read pointer */
- ha->nx_db_rd_ptr = (uint8_t *) ha->nx_pcibase + (512 * 1024) +
- (ha->pdev->devfn * 8);
- if (!ha->nx_db_rd_ptr)
- printk(KERN_ERR
- "cannot remap MMIO doorbell-read (%s), aborting\n",
- pci_name(pdev));
- return 0;
+ ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
+ QLA82XX_CAM_RAM_DB2);
+ return 0;
iospace_error_exit:
return -ENOMEM;
}
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
