From: Krishna Gudipati <kgudipat@xxxxxxxxxxx>
Resending the patch 1/33 by splitting it into two patches 1a and 1b,
as its not showing up in the linux-scsi mailing list, due to its size.
Change details:
- This patch is part of the BFA cleanup.
- Removed the include subdir under BFA and flattened the hierarchy.
- The .h files under include will be handled as below:
Files under:
- AEN - Will be removed.
- BFI - Cleaned up BFA to FW interface header files bfi.h, bfi_ms.h,
bfi_cbreg.h & bfi_ctreg.h will be merged to top-level BFA dir.
- CNA - Only file bfa_port.h will be merged to top-level BFA.
- LOG - Will be removed, using native logging.
- Protocol - Will be removed, some needed stuff merged to bfa_fc.h and moved
to top-level BFA.
Signed-off-by: Krishna Gudipati <kgudipat@xxxxxxxxxxx>
---
drivers/scsi/bfa/include/aen/bfa_aen.h | 96 --
drivers/scsi/bfa/include/aen/bfa_aen_adapter.h | 31 -
drivers/scsi/bfa/include/aen/bfa_aen_audit.h | 31 -
drivers/scsi/bfa/include/aen/bfa_aen_ethport.h | 35 -
drivers/scsi/bfa/include/aen/bfa_aen_ioc.h | 45 -
drivers/scsi/bfa/include/aen/bfa_aen_itnim.h | 33 -
drivers/scsi/bfa/include/aen/bfa_aen_lport.h | 51 -
drivers/scsi/bfa/include/aen/bfa_aen_port.h | 57 -
drivers/scsi/bfa/include/aen/bfa_aen_rport.h | 37 -
drivers/scsi/bfa/include/bfi/bfi.h | 174 --
drivers/scsi/bfa/include/bfi/bfi_boot.h | 34 -
drivers/scsi/bfa/include/bfi/bfi_cbreg.h | 319 ----
drivers/scsi/bfa/include/bfi/bfi_cee.h | 119 --
drivers/scsi/bfa/include/bfi/bfi_ctreg.h | 640 --------
drivers/scsi/bfa/include/bfi/bfi_fabric.h | 92 --
drivers/scsi/bfa/include/bfi/bfi_fcpim.h | 301 ----
drivers/scsi/bfa/include/bfi/bfi_fcxp.h | 71 -
drivers/scsi/bfa/include/bfi/bfi_ioc.h | 208 ---
drivers/scsi/bfa/include/bfi/bfi_iocfc.h | 179 ---
drivers/scsi/bfa/include/bfi/bfi_lport.h | 89 --
drivers/scsi/bfa/include/bfi/bfi_lps.h | 104 --
drivers/scsi/bfa/include/bfi/bfi_pbc.h | 62 -
drivers/scsi/bfa/include/bfi/bfi_port.h | 115 --
drivers/scsi/bfa/include/bfi/bfi_pport.h | 118 --
drivers/scsi/bfa/include/bfi/bfi_rport.h | 104 --
drivers/scsi/bfa/include/bfi/bfi_uf.h | 52 -
drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h | 40 -
drivers/scsi/bfa/include/cna/cee/bfa_cee.h | 77 -
drivers/scsi/bfa/include/cna/port/bfa_port.h | 70 -
drivers/scsi/bfa/include/cna/pstats/ethport_defs.h | 36 -
drivers/scsi/bfa/include/cna/pstats/phyport_defs.h | 218 ---
drivers/scsi/bfa/include/cs/bfa_checksum.h | 60 -
drivers/scsi/bfa/include/cs/bfa_debug.h | 45 -
drivers/scsi/bfa/include/cs/bfa_log.h | 184 ---
drivers/scsi/bfa/include/cs/bfa_perf.h | 34 -
drivers/scsi/bfa/include/cs/bfa_plog.h | 167 --
drivers/scsi/bfa/include/cs/bfa_q.h | 81 -
drivers/scsi/bfa/include/cs/bfa_sm.h | 77 -
drivers/scsi/bfa/include/cs/bfa_trc.h | 176 ---
drivers/scsi/bfa/include/cs/bfa_wc.h | 68 -
drivers/scsi/bfa/include/log/bfa_log_fcs.h | 28 -
drivers/scsi/bfa/include/log/bfa_log_hal.h | 36 -
drivers/scsi/bfa/include/log/bfa_log_linux.h | 62 -
drivers/scsi/bfa/include/log/bfa_log_wdrv.h | 36 -
drivers/scsi/bfa/include/protocol/ct.h | 492 ------
drivers/scsi/bfa/include/protocol/fc.h | 1111 -------------
drivers/scsi/bfa/include/protocol/fc_sp.h | 224 ---
drivers/scsi/bfa/include/protocol/fcp.h | 184 ---
drivers/scsi/bfa/include/protocol/fdmi.h | 163 --
drivers/scsi/bfa/include/protocol/scsi.h | 1648 --------------------
drivers/scsi/bfa/include/protocol/types.h | 42 -
51 files changed, 0 insertions(+), 8556 deletions(-)
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_audit.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_lport.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_port.h
delete mode 100644 drivers/scsi/bfa/include/aen/bfa_aen_rport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_boot.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_cbreg.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_cee.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_ctreg.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fabric.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fcpim.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_fcxp.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_ioc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_iocfc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_lport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_lps.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_pbc.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_port.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_pport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_rport.h
delete mode 100644 drivers/scsi/bfa/include/bfi/bfi_uf.h
delete mode 100644 drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
delete mode 100644 drivers/scsi/bfa/include/cna/cee/bfa_cee.h
delete mode 100644 drivers/scsi/bfa/include/cna/port/bfa_port.h
delete mode 100644 drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
delete mode 100644 drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_checksum.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_debug.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_log.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_perf.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_plog.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_q.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_sm.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_trc.h
delete mode 100644 drivers/scsi/bfa/include/cs/bfa_wc.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_fcs.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_hal.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_linux.h
delete mode 100644 drivers/scsi/bfa/include/log/bfa_log_wdrv.h
delete mode 100644 drivers/scsi/bfa/include/protocol/ct.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fc.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fc_sp.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fcp.h
delete mode 100644 drivers/scsi/bfa/include/protocol/fdmi.h
delete mode 100644 drivers/scsi/bfa/include/protocol/scsi.h
delete mode 100644 drivers/scsi/bfa/include/protocol/types.h
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen.h b/drivers/scsi/bfa/include/aen/bfa_aen.h
deleted file mode 100644
index 6abbab0..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_AEN_H__
-#define __BFA_AEN_H__
-
-#include "defs/bfa_defs_aen.h"
-#include "defs/bfa_defs_status.h"
-#include "cs/bfa_debug.h"
-
-#define BFA_AEN_MAX_ENTRY 512
-
-extern int bfa_aen_max_cfg_entry;
-struct bfa_aen_s {
- void *bfad;
- int max_entry;
- int write_index;
- int read_index;
- int bfad_num;
- int seq_num;
- void (*aen_cb_notify)(void *bfad);
- void (*gettimeofday)(struct bfa_timeval_s *tv);
- struct bfa_trc_mod_s *trcmod;
- int app_ri[BFA_AEN_MAX_APP]; /* For multiclient support */
- struct bfa_aen_entry_s list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
-};
-
-
-/**
- * Public APIs
- */
-static inline void
-bfa_aen_set_max_cfg_entry(int max_entry)
-{
- bfa_aen_max_cfg_entry = max_entry;
-}
-
-static inline int
-bfa_aen_get_max_cfg_entry(void)
-{
- return bfa_aen_max_cfg_entry;
-}
-
-static inline int
-bfa_aen_get_meminfo(void)
-{
- return sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry();
-}
-
-static inline int
-bfa_aen_get_wi(struct bfa_aen_s *aen)
-{
- return aen->write_index;
-}
-
-static inline int
-bfa_aen_get_ri(struct bfa_aen_s *aen)
-{
- return aen->read_index;
-}
-
-static inline int
-bfa_aen_fetch_count(struct bfa_aen_s *aen, enum bfa_aen_app app_id)
-{
- bfa_assert((app_id < BFA_AEN_MAX_APP) && (app_id >= bfa_aen_app_bcu));
- return ((aen->write_index + aen->max_entry) - aen->app_ri[app_id])
- % aen->max_entry;
-}
-
-int bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
- void *bfad, int bfad_num, void (*aen_cb_notify)(void *),
- void (*gettimeofday)(struct bfa_timeval_s *));
-
-void bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
- int aen_type, union bfa_aen_data_u *aen_data);
-
-bfa_status_t bfa_aen_fetch(struct bfa_aen_s *aen,
- struct bfa_aen_entry_s *aen_entry,
- int entry_req, enum bfa_aen_app app_id, int *entry_ret);
-
-int bfa_aen_get_inst(struct bfa_aen_s *aen);
-
-#endif /* __BFA_AEN_H__ */
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h b/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
deleted file mode 100644
index 260d3ea..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_adapter.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ADAPTER Module */
-#ifndef __bfa_aen_adapter_h__
-#define __bfa_aen_adapter_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ADAPTER_ADD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_ADD)
-#define BFA_AEN_ADAPTER_REMOVE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_REMOVE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_audit.h b/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
deleted file mode 100644
index 12cd7aa..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_audit.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_AUDIT Module */
-#ifndef __bfa_aen_audit_h__
-#define __bfa_aen_audit_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_AUDIT_AUTH_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_ENABLE)
-#define BFA_AEN_AUDIT_AUTH_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_DISABLE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h b/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
deleted file mode 100644
index 507d0b5..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_ethport.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ETHPORT Module */
-#ifndef __bfa_aen_ethport_h__
-#define __bfa_aen_ethport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ETHPORT_LINKUP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKUP)
-#define BFA_AEN_ETHPORT_LINKDOWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKDOWN)
-#define BFA_AEN_ETHPORT_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_ENABLE)
-#define BFA_AEN_ETHPORT_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_DISABLE)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h b/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
deleted file mode 100644
index 4daf96f..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_ioc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_IOC Module */
-#ifndef __bfa_aen_ioc_h__
-#define __bfa_aen_ioc_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_IOC_HBGOOD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBGOOD)
-#define BFA_AEN_IOC_HBFAIL \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBFAIL)
-#define BFA_AEN_IOC_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_ENABLE)
-#define BFA_AEN_IOC_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_DISABLE)
-#define BFA_AEN_IOC_FWMISMATCH \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWMISMATCH)
-#define BFA_AEN_IOC_FWCFG_ERROR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWCFG_ERROR)
-#define BFA_AEN_IOC_INVALID_VENDOR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_VENDOR)
-#define BFA_AEN_IOC_INVALID_NWWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_NWWN)
-#define BFA_AEN_IOC_INVALID_PWWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_INVALID_PWWN)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h b/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
deleted file mode 100644
index a7d8ddc..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_itnim.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_ITNIM Module */
-#ifndef __bfa_aen_itnim_h__
-#define __bfa_aen_itnim_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_ITNIM_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_ONLINE)
-#define BFA_AEN_ITNIM_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_OFFLINE)
-#define BFA_AEN_ITNIM_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_DISCONNECT)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_lport.h b/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
deleted file mode 100644
index 5a8ebb6..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_lport.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_LPORT Module */
-#ifndef __bfa_aen_lport_h__
-#define __bfa_aen_lport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_LPORT_NEW \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW)
-#define BFA_AEN_LPORT_DELETE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE)
-#define BFA_AEN_LPORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_ONLINE)
-#define BFA_AEN_LPORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_OFFLINE)
-#define BFA_AEN_LPORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DISCONNECT)
-#define BFA_AEN_LPORT_NEW_PROP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_PROP)
-#define BFA_AEN_LPORT_DELETE_PROP \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_PROP)
-#define BFA_AEN_LPORT_NEW_STANDARD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_STANDARD)
-#define BFA_AEN_LPORT_DELETE_STANDARD \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_STANDARD)
-#define BFA_AEN_LPORT_NPIV_DUP_WWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_DUP_WWN)
-#define BFA_AEN_LPORT_NPIV_FABRIC_MAX \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_FABRIC_MAX)
-#define BFA_AEN_LPORT_NPIV_UNKNOWN \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_UNKNOWN)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_port.h b/drivers/scsi/bfa/include/aen/bfa_aen_port.h
deleted file mode 100644
index 9add905..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_port.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_PORT Module */
-#ifndef __bfa_aen_port_h__
-#define __bfa_aen_port_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_PORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ONLINE)
-#define BFA_AEN_PORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_OFFLINE)
-#define BFA_AEN_PORT_RLIR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_RLIR)
-#define BFA_AEN_PORT_SFP_INSERT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_INSERT)
-#define BFA_AEN_PORT_SFP_REMOVE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_REMOVE)
-#define BFA_AEN_PORT_SFP_POM \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_POM)
-#define BFA_AEN_PORT_ENABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ENABLE)
-#define BFA_AEN_PORT_DISABLE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISABLE)
-#define BFA_AEN_PORT_AUTH_ON \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_ON)
-#define BFA_AEN_PORT_AUTH_OFF \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_OFF)
-#define BFA_AEN_PORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISCONNECT)
-#define BFA_AEN_PORT_QOS_NEG \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_QOS_NEG)
-#define BFA_AEN_PORT_FABRIC_NAME_CHANGE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_FABRIC_NAME_CHANGE)
-#define BFA_AEN_PORT_SFP_ACCESS_ERROR \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_ACCESS_ERROR)
-#define BFA_AEN_PORT_SFP_UNSUPPORT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_UNSUPPORT)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen_rport.h b/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
deleted file mode 100644
index 7e4be1f..0000000
--- a/drivers/scsi/bfa/include/aen/bfa_aen_rport.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for BFA_AEN_CAT_RPORT Module */
-#ifndef __bfa_aen_rport_h__
-#define __bfa_aen_rport_h__
-
-#include <cs/bfa_log.h>
-#include <defs/bfa_defs_aen.h>
-
-#define BFA_AEN_RPORT_ONLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_ONLINE)
-#define BFA_AEN_RPORT_OFFLINE \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_OFFLINE)
-#define BFA_AEN_RPORT_DISCONNECT \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_DISCONNECT)
-#define BFA_AEN_RPORT_QOS_PRIO \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_PRIO)
-#define BFA_AEN_RPORT_QOS_FLOWID \
- BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_FLOWID)
-
-#endif
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi.h b/drivers/scsi/bfa/include/bfi/bfi.h
deleted file mode 100644
index a550e80..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_H__
-#define __BFI_H__
-
-#include <bfa_os_inc.h>
-#include <defs/bfa_defs_status.h>
-
-#pragma pack(1)
-
-/**
- * Msg header common to all msgs
- */
-struct bfi_mhdr_s {
- u8 msg_class; /* @ref bfi_mclass_t */
- u8 msg_id; /* msg opcode with in the class */
- union {
- struct {
- u8 rsvd;
- u8 lpu_id; /* msg destination */
- } h2i;
- u16 i2htok; /* token in msgs to host */
- } mtag;
-};
-
-#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \
- (_mh).msg_class = (_mc); \
- (_mh).msg_id = (_op); \
- (_mh).mtag.h2i.lpu_id = (_lpuid); \
-} while (0)
-
-#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \
- (_mh).msg_class = (_mc); \
- (_mh).msg_id = (_op); \
- (_mh).mtag.i2htok = (_i2htok); \
-} while (0)
-
-/*
- * Message opcodes: 0-127 to firmware, 128-255 to host
- */
-#define BFI_I2H_OPCODE_BASE 128
-#define BFA_I2HM(_x) ((_x) + BFI_I2H_OPCODE_BASE)
-
-/**
- ****************************************************************************
- *
- * Scatter Gather Element and Page definition
- *
- ****************************************************************************
- */
-
-#define BFI_SGE_INLINE 1
-#define BFI_SGE_INLINE_MAX (BFI_SGE_INLINE + 1)
-
-/**
- * SG Flags
- */
-enum {
- BFI_SGE_DATA = 0, /* data address, not last */
- BFI_SGE_DATA_CPL = 1, /* data addr, last in current page */
- BFI_SGE_DATA_LAST = 3, /* data address, last */
- BFI_SGE_LINK = 2, /* link address */
- BFI_SGE_PGDLEN = 2, /* cumulative data length for page */
-};
-
-/**
- * DMA addresses
- */
-union bfi_addr_u {
- struct {
- u32 addr_lo;
- u32 addr_hi;
- } a32;
-};
-
-/**
- * Scatter Gather Element
- */
-struct bfi_sge_s {
-#ifdef __BIGENDIAN
- u32 flags:2,
- rsvd:2,
- sg_len:28;
-#else
- u32 sg_len:28,
- rsvd:2,
- flags:2;
-#endif
- union bfi_addr_u sga;
-};
-
-/**
- * Scatter Gather Page
- */
-#define BFI_SGPG_DATA_SGES 7
-#define BFI_SGPG_SGES_MAX (BFI_SGPG_DATA_SGES + 1)
-#define BFI_SGPG_RSVD_WD_LEN 8
-struct bfi_sgpg_s {
- struct bfi_sge_s sges[BFI_SGPG_SGES_MAX];
- u32 rsvd[BFI_SGPG_RSVD_WD_LEN];
-};
-
-/*
- * Large Message structure - 128 Bytes size Msgs
- */
-#define BFI_LMSG_SZ 128
-#define BFI_LMSG_PL_WSZ \
- ((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4)
-
-struct bfi_msg_s {
- struct bfi_mhdr_s mhdr;
- u32 pl[BFI_LMSG_PL_WSZ];
-};
-
-/**
- * Mailbox message structure
- */
-#define BFI_MBMSG_SZ 7
-struct bfi_mbmsg_s {
- struct bfi_mhdr_s mh;
- u32 pl[BFI_MBMSG_SZ];
-};
-
-/**
- * Message Classes
- */
-enum bfi_mclass {
- BFI_MC_IOC = 1, /* IO Controller (IOC) */
- BFI_MC_DIAG = 2, /* Diagnostic Msgs */
- BFI_MC_FLASH = 3, /* Flash message class */
- BFI_MC_CEE = 4, /* CEE */
- BFI_MC_FCPORT = 5, /* FC port */
- BFI_MC_IOCFC = 6, /* FC - IO Controller (IOC) */
- BFI_MC_LL = 7, /* Link Layer */
- BFI_MC_UF = 8, /* Unsolicited frame receive */
- BFI_MC_FCXP = 9, /* FC Transport */
- BFI_MC_LPS = 10, /* lport fc login services */
- BFI_MC_RPORT = 11, /* Remote port */
- BFI_MC_ITNIM = 12, /* I-T nexus (Initiator mode) */
- BFI_MC_IOIM_READ = 13, /* read IO (Initiator mode) */
- BFI_MC_IOIM_WRITE = 14, /* write IO (Initiator mode) */
- BFI_MC_IOIM_IO = 15, /* IO (Initiator mode) */
- BFI_MC_IOIM = 16, /* IO (Initiator mode) */
- BFI_MC_IOIM_IOCOM = 17, /* good IO completion */
- BFI_MC_TSKIM = 18, /* Initiator Task management */
- BFI_MC_SBOOT = 19, /* SAN boot services */
- BFI_MC_IPFC = 20, /* IP over FC Msgs */
- BFI_MC_PORT = 21, /* Physical port */
- BFI_MC_MAX = 32
-};
-
-#define BFI_IOC_MAX_CQS 4
-#define BFI_IOC_MAX_CQS_ASIC 8
-#define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */
-
-#pragma pack()
-
-#endif /* __BFI_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_boot.h b/drivers/scsi/bfa/include/bfi/bfi_boot.h
deleted file mode 100644
index 5955afe..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_boot.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-/*
- * bfi_boot.h
- */
-
-#ifndef __BFI_BOOT_H__
-#define __BFI_BOOT_H__
-
-#define BFI_BOOT_TYPE_OFF 8
-#define BFI_BOOT_PARAM_OFF 12
-
-#define BFI_BOOT_TYPE_NORMAL 0 /* param is device id */
-#define BFI_BOOT_TYPE_FLASH 1
-#define BFI_BOOT_TYPE_MEMTEST 2
-
-#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
-#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
-
-#endif
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h b/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
deleted file mode 100644
index a51ee61..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_cbreg.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * bfi_cbreg.h crossbow host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CBREG_H__
-#define __BFI_CBREG_H__
-
-
-#define HOSTFN0_INT_STATUS 0x00014000
-#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH 20
-#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P 0x000fffff
-#define HOSTFN0_INT_MSK 0x00014004
-#define HOST_PAGE_NUM_FN0 0x00014008
-#define __HOST_PAGE_NUM_FN 0x000001ff
-#define HOSTFN1_INT_STATUS 0x00014100
-#define __HOSTFN1_INT_STAT_LVL_MK 0x00f00000
-#define __HOSTFN1_INT_STAT_LVL_SH 20
-#define __HOSTFN1_INT_STAT_LVL(_v) ((_v) << __HOSTFN1_INT_STAT_LVL_SH)
-#define __HOSTFN1_INT_STAT_P 0x000fffff
-#define HOSTFN1_INT_MSK 0x00014104
-#define HOST_PAGE_NUM_FN1 0x00014108
-#define APP_PLL_400_CTL_REG 0x00014204
-#define __P_400_PLL_LOCK 0x80000000
-#define __APP_PLL_400_SRAM_USE_100MHZ 0x00100000
-#define __APP_PLL_400_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_400_RESET_TIMER_SH 17
-#define __APP_PLL_400_RESET_TIMER(_v) ((_v) << __APP_PLL_400_RESET_TIMER_SH)
-#define __APP_PLL_400_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_400_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_400_CNTLMT0_1_SH 14
-#define __APP_PLL_400_CNTLMT0_1(_v) ((_v) << __APP_PLL_400_CNTLMT0_1_SH)
-#define __APP_PLL_400_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_400_JITLMT0_1_SH 12
-#define __APP_PLL_400_JITLMT0_1(_v) ((_v) << __APP_PLL_400_JITLMT0_1_SH)
-#define __APP_PLL_400_HREF 0x00000800
-#define __APP_PLL_400_HDIV 0x00000400
-#define __APP_PLL_400_P0_1_MK 0x00000300
-#define __APP_PLL_400_P0_1_SH 8
-#define __APP_PLL_400_P0_1(_v) ((_v) << __APP_PLL_400_P0_1_SH)
-#define __APP_PLL_400_Z0_2_MK 0x000000e0
-#define __APP_PLL_400_Z0_2_SH 5
-#define __APP_PLL_400_Z0_2(_v) ((_v) << __APP_PLL_400_Z0_2_SH)
-#define __APP_PLL_400_RSEL200500 0x00000010
-#define __APP_PLL_400_ENARST 0x00000008
-#define __APP_PLL_400_BYPASS 0x00000004
-#define __APP_PLL_400_LRESETN 0x00000002
-#define __APP_PLL_400_ENABLE 0x00000001
-#define APP_PLL_212_CTL_REG 0x00014208
-#define __P_212_PLL_LOCK 0x80000000
-#define __APP_PLL_212_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_212_RESET_TIMER_SH 17
-#define __APP_PLL_212_RESET_TIMER(_v) ((_v) << __APP_PLL_212_RESET_TIMER_SH)
-#define __APP_PLL_212_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_212_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_212_CNTLMT0_1_SH 14
-#define __APP_PLL_212_CNTLMT0_1(_v) ((_v) << __APP_PLL_212_CNTLMT0_1_SH)
-#define __APP_PLL_212_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_212_JITLMT0_1_SH 12
-#define __APP_PLL_212_JITLMT0_1(_v) ((_v) << __APP_PLL_212_JITLMT0_1_SH)
-#define __APP_PLL_212_HREF 0x00000800
-#define __APP_PLL_212_HDIV 0x00000400
-#define __APP_PLL_212_P0_1_MK 0x00000300
-#define __APP_PLL_212_P0_1_SH 8
-#define __APP_PLL_212_P0_1(_v) ((_v) << __APP_PLL_212_P0_1_SH)
-#define __APP_PLL_212_Z0_2_MK 0x000000e0
-#define __APP_PLL_212_Z0_2_SH 5
-#define __APP_PLL_212_Z0_2(_v) ((_v) << __APP_PLL_212_Z0_2_SH)
-#define __APP_PLL_212_RSEL200500 0x00000010
-#define __APP_PLL_212_ENARST 0x00000008
-#define __APP_PLL_212_BYPASS 0x00000004
-#define __APP_PLL_212_LRESETN 0x00000002
-#define __APP_PLL_212_ENABLE 0x00000001
-#define HOST_SEM0_REG 0x00014230
-#define __HOST_SEMAPHORE 0x00000001
-#define HOST_SEM1_REG 0x00014234
-#define HOST_SEM2_REG 0x00014238
-#define HOST_SEM3_REG 0x0001423c
-#define HOST_SEM0_INFO_REG 0x00014240
-#define HOST_SEM1_INFO_REG 0x00014244
-#define HOST_SEM2_INFO_REG 0x00014248
-#define HOST_SEM3_INFO_REG 0x0001424c
-#define HOSTFN0_LPU0_CMD_STAT 0x00019000
-#define __HOSTFN0_LPU0_MBOX_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU0_MBOX_INFO_SH 1
-#define __HOSTFN0_LPU0_MBOX_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_CMD_STAT 0x00019008
-#define __LPU0_HOSTFN0_MBOX_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN0_MBOX_INFO_SH 1
-#define __LPU0_HOSTFN0_MBOX_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_CMD_STAT 0x00019014
-#define __HOSTFN1_LPU1_MBOX_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU1_MBOX_INFO_SH 1
-#define __HOSTFN1_LPU1_MBOX_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_CMD_STAT 0x0001901c
-#define __LPU1_HOSTFN1_MBOX_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN1_MBOX_INFO_SH 1
-#define __LPU1_HOSTFN1_MBOX_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX_CMD_STATUS 0x00000001
-#define CPE_Q0_DEPTH 0x00010014
-#define CPE_Q0_PI 0x0001001c
-#define CPE_Q0_CI 0x00010020
-#define CPE_Q1_DEPTH 0x00010034
-#define CPE_Q1_PI 0x0001003c
-#define CPE_Q1_CI 0x00010040
-#define CPE_Q2_DEPTH 0x00010054
-#define CPE_Q2_PI 0x0001005c
-#define CPE_Q2_CI 0x00010060
-#define CPE_Q3_DEPTH 0x00010074
-#define CPE_Q3_PI 0x0001007c
-#define CPE_Q3_CI 0x00010080
-#define CPE_Q4_DEPTH 0x00010094
-#define CPE_Q4_PI 0x0001009c
-#define CPE_Q4_CI 0x000100a0
-#define CPE_Q5_DEPTH 0x000100b4
-#define CPE_Q5_PI 0x000100bc
-#define CPE_Q5_CI 0x000100c0
-#define CPE_Q6_DEPTH 0x000100d4
-#define CPE_Q6_PI 0x000100dc
-#define CPE_Q6_CI 0x000100e0
-#define CPE_Q7_DEPTH 0x000100f4
-#define CPE_Q7_PI 0x000100fc
-#define CPE_Q7_CI 0x00010100
-#define RME_Q0_DEPTH 0x00011014
-#define RME_Q0_PI 0x0001101c
-#define RME_Q0_CI 0x00011020
-#define RME_Q1_DEPTH 0x00011034
-#define RME_Q1_PI 0x0001103c
-#define RME_Q1_CI 0x00011040
-#define RME_Q2_DEPTH 0x00011054
-#define RME_Q2_PI 0x0001105c
-#define RME_Q2_CI 0x00011060
-#define RME_Q3_DEPTH 0x00011074
-#define RME_Q3_PI 0x0001107c
-#define RME_Q3_CI 0x00011080
-#define RME_Q4_DEPTH 0x00011094
-#define RME_Q4_PI 0x0001109c
-#define RME_Q4_CI 0x000110a0
-#define RME_Q5_DEPTH 0x000110b4
-#define RME_Q5_PI 0x000110bc
-#define RME_Q5_CI 0x000110c0
-#define RME_Q6_DEPTH 0x000110d4
-#define RME_Q6_PI 0x000110dc
-#define RME_Q6_CI 0x000110e0
-#define RME_Q7_DEPTH 0x000110f4
-#define RME_Q7_PI 0x000110fc
-#define RME_Q7_CI 0x00011100
-#define PSS_CTL_REG 0x00018800
-#define __PSS_I2C_CLK_DIV_MK 0x00030000
-#define __PSS_I2C_CLK_DIV_SH 16
-#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE 0x00001000
-#define __PSS_LMEM_RESET 0x00000200
-#define __PSS_LMEM_INIT_EN 0x00000100
-#define __PSS_LPU1_RESET 0x00000002
-#define __PSS_LPU0_RESET 0x00000001
-#define PSS_ERR_STATUS_REG 0x00018810
-#define __PSS_LMEM1_CORR_ERR 0x00000800
-#define __PSS_LMEM0_CORR_ERR 0x00000400
-#define __PSS_LMEM1_UNCORR_ERR 0x00000200
-#define __PSS_LMEM0_UNCORR_ERR 0x00000100
-#define __PSS_BAL_PERR 0x00000080
-#define __PSS_DIP_IF_ERR 0x00000040
-#define __PSS_IOH_IF_ERR 0x00000020
-#define __PSS_TDS_IF_ERR 0x00000010
-#define __PSS_RDS_IF_ERR 0x00000008
-#define __PSS_SGM_IF_ERR 0x00000004
-#define __PSS_LPU1_RAM_ERR 0x00000002
-#define __PSS_LPU0_RAM_ERR 0x00000001
-#define ERR_SET_REG 0x00018818
-#define __PSS_ERR_STATUS_SET 0x00000fff
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
-#define __EMPHPRE_AT_4G_FIX 0x00000003
-#define __SFP_TXRATE_EN_FIX 0x00000100
-#define __SFP_RXRATE_EN_FIX 0x00000080
-
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-#define HOSTFN0_LPU_MBOX0_0 0x00019200
-#define HOSTFN1_LPU_MBOX0_8 0x00019260
-#define LPU_HOSTFN0_MBOX0_0 0x00019280
-#define LPU_HOSTFN1_MBOX0_8 0x000192e0
-
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
-
-#define CPE_Q_DEPTH(__n) \
- (CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
-#define CPE_Q_PI(__n) \
- (CPE_Q0_PI + (__n) * (CPE_Q1_PI - CPE_Q0_PI))
-#define CPE_Q_CI(__n) \
- (CPE_Q0_CI + (__n) * (CPE_Q1_CI - CPE_Q0_CI))
-#define RME_Q_DEPTH(__n) \
- (RME_Q0_DEPTH + (__n) * (RME_Q1_DEPTH - RME_Q0_DEPTH))
-#define RME_Q_PI(__n) \
- (RME_Q0_PI + (__n) * (RME_Q1_PI - RME_Q0_PI))
-#define RME_Q_CI(__n) \
- (RME_Q0_CI + (__n) * (RME_Q1_CI - RME_Q0_CI))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
- BFA_MSIX_CPE_Q0 = 0,
- BFA_MSIX_CPE_Q1 = 1,
- BFA_MSIX_CPE_Q2 = 2,
- BFA_MSIX_CPE_Q3 = 3,
- BFA_MSIX_CPE_Q4 = 4,
- BFA_MSIX_CPE_Q5 = 5,
- BFA_MSIX_CPE_Q6 = 6,
- BFA_MSIX_CPE_Q7 = 7,
- BFA_MSIX_RME_Q0 = 8,
- BFA_MSIX_RME_Q1 = 9,
- BFA_MSIX_RME_Q2 = 10,
- BFA_MSIX_RME_Q3 = 11,
- BFA_MSIX_RME_Q4 = 12,
- BFA_MSIX_RME_Q5 = 13,
- BFA_MSIX_RME_Q6 = 14,
- BFA_MSIX_RME_Q7 = 15,
- BFA_MSIX_ERR_EMC = 16,
- BFA_MSIX_ERR_LPU0 = 17,
- BFA_MSIX_ERR_LPU1 = 18,
- BFA_MSIX_ERR_PSS = 19,
- BFA_MSIX_MBOX_LPU0 = 20,
- BFA_MSIX_MBOX_LPU1 = 21,
- BFA_MSIX_CB_MAX = 22,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0 0x00000001U
-#define __HFN_INT_CPE_Q1 0x00000002U
-#define __HFN_INT_CPE_Q2 0x00000004U
-#define __HFN_INT_CPE_Q3 0x00000008U
-#define __HFN_INT_CPE_Q4 0x00000010U
-#define __HFN_INT_CPE_Q5 0x00000020U
-#define __HFN_INT_CPE_Q6 0x00000040U
-#define __HFN_INT_CPE_Q7 0x00000080U
-#define __HFN_INT_RME_Q0 0x00000100U
-#define __HFN_INT_RME_Q1 0x00000200U
-#define __HFN_INT_RME_Q2 0x00000400U
-#define __HFN_INT_RME_Q3 0x00000800U
-#define __HFN_INT_RME_Q4 0x00001000U
-#define __HFN_INT_RME_Q5 0x00002000U
-#define __HFN_INT_RME_Q6 0x00004000U
-#define __HFN_INT_RME_Q7 0x00008000U
-#define __HFN_INT_ERR_EMC 0x00010000U
-#define __HFN_INT_ERR_LPU0 0x00020000U
-#define __HFN_INT_ERR_LPU1 0x00040000U
-#define __HFN_INT_ERR_PSS 0x00080000U
-#define __HFN_INT_MBOX_LPU0 0x00100000U
-#define __HFN_INT_MBOX_LPU1 0x00200000U
-#define __HFN_INT_MBOX1_LPU0 0x00400000U
-#define __HFN_INT_MBOX1_LPU1 0x00800000U
-#define __HFN_INT_CPE_MASK 0x000000ffU
-#define __HFN_INT_RME_MASK 0x0000ff00U
-
-
-/*
- * crossbow memory map.
- */
-#define PSS_SMEM_PAGE_START 0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
-
-/*
- * End of crossbow memory map
- */
-
-
-#endif /* __BFI_CBREG_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_cee.h b/drivers/scsi/bfa/include/bfi/bfi_cee.h
deleted file mode 100644
index 0970596..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_cee.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-/**
- * Copyright (c) 2006-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * bfi_dcbx.h BFI Interface (Mailbox commands and related structures)
- * between host driver and DCBX/LLDP firmware module.
- *
-**/
-
-#ifndef __BFI_CEE_H__
-#define __BFI_CEE_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-
-enum bfi_cee_h2i_msgs_e {
- BFI_CEE_H2I_GET_CFG_REQ = 1,
- BFI_CEE_H2I_RESET_STATS = 2,
- BFI_CEE_H2I_GET_STATS_REQ = 3,
-};
-
-
-enum bfi_cee_i2h_msgs_e {
- BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
- BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
- BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
-};
-
-
-/* Data structures */
-
-/*
- * BFI_CEE_H2I_RESET_STATS
- */
-struct bfi_lldp_reset_stats_s {
- struct bfi_mhdr_s mh;
-};
-
-/*
- * BFI_CEE_H2I_RESET_STATS
- */
-struct bfi_cee_reset_stats_s {
- struct bfi_mhdr_s mh;
-};
-
-/*
- * BFI_CEE_H2I_GET_CFG_REQ
- */
-struct bfi_cee_get_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u dma_addr;
-};
-
-
-/*
- * BFI_CEE_I2H_GET_CFG_RSP
- */
-struct bfi_cee_get_rsp_s {
- struct bfi_mhdr_s mh;
- u8 cmd_status;
- u8 rsvd[3];
-};
-
-/*
- * BFI_CEE_H2I_GET_STATS_REQ
- */
-struct bfi_cee_stats_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u dma_addr;
-};
-
-
-/*
- * BFI_CEE_I2H_GET_STATS_RSP
- */
-struct bfi_cee_stats_rsp_s {
- struct bfi_mhdr_s mh;
- u8 cmd_status;
- u8 rsvd[3];
-};
-
-
-
-union bfi_cee_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_cee_get_req_s get_req;
- struct bfi_cee_stats_req_s stats_req;
-};
-
-
-union bfi_cee_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_cee_get_rsp_s get_rsp;
- struct bfi_cee_stats_rsp_s stats_rsp;
-};
-
-#pragma pack()
-
-
-#endif /* __BFI_CEE_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h b/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
deleted file mode 100644
index c0ef5a9..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_ctreg.h
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * bfi_ctreg.h catapult host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CTREG_H__
-#define __BFI_CTREG_H__
-
-
-#define HOSTFN0_LPU_MBOX0_0 0x00019200
-#define HOSTFN1_LPU_MBOX0_8 0x00019260
-#define LPU_HOSTFN0_MBOX0_0 0x00019280
-#define LPU_HOSTFN1_MBOX0_8 0x000192e0
-#define HOSTFN2_LPU_MBOX0_0 0x00019400
-#define HOSTFN3_LPU_MBOX0_8 0x00019460
-#define LPU_HOSTFN2_MBOX0_0 0x00019480
-#define LPU_HOSTFN3_MBOX0_8 0x000194e0
-#define HOSTFN0_INT_STATUS 0x00014000
-#define __HOSTFN0_HALT_OCCURRED 0x01000000
-#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH 20
-#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN0_INT_STATUS_P_SH 16
-#define __HOSTFN0_INT_STATUS_P(_v) ((_v) << __HOSTFN0_INT_STATUS_P_SH)
-#define __HOSTFN0_INT_STATUS_F 0x0000ffff
-#define HOSTFN0_INT_MSK 0x00014004
-#define HOST_PAGE_NUM_FN0 0x00014008
-#define __HOST_PAGE_NUM_FN 0x000001ff
-#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c
-#define __MSIX_ERR_INDEX_FN 0x000001ff
-#define HOSTFN1_INT_STATUS 0x00014100
-#define __HOSTFN1_HALT_OCCURRED 0x01000000
-#define __HOSTFN1_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN1_INT_STATUS_LVL_SH 20
-#define __HOSTFN1_INT_STATUS_LVL(_v) ((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
-#define __HOSTFN1_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN1_INT_STATUS_P_SH 16
-#define __HOSTFN1_INT_STATUS_P(_v) ((_v) << __HOSTFN1_INT_STATUS_P_SH)
-#define __HOSTFN1_INT_STATUS_F 0x0000ffff
-#define HOSTFN1_INT_MSK 0x00014104
-#define HOST_PAGE_NUM_FN1 0x00014108
-#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c
-#define APP_PLL_425_CTL_REG 0x00014204
-#define __P_425_PLL_LOCK 0x80000000
-#define __APP_PLL_425_SRAM_USE_100MHZ 0x00100000
-#define __APP_PLL_425_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_425_RESET_TIMER_SH 17
-#define __APP_PLL_425_RESET_TIMER(_v) ((_v) << __APP_PLL_425_RESET_TIMER_SH)
-#define __APP_PLL_425_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_425_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_425_CNTLMT0_1_SH 14
-#define __APP_PLL_425_CNTLMT0_1(_v) ((_v) << __APP_PLL_425_CNTLMT0_1_SH)
-#define __APP_PLL_425_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_425_JITLMT0_1_SH 12
-#define __APP_PLL_425_JITLMT0_1(_v) ((_v) << __APP_PLL_425_JITLMT0_1_SH)
-#define __APP_PLL_425_HREF 0x00000800
-#define __APP_PLL_425_HDIV 0x00000400
-#define __APP_PLL_425_P0_1_MK 0x00000300
-#define __APP_PLL_425_P0_1_SH 8
-#define __APP_PLL_425_P0_1(_v) ((_v) << __APP_PLL_425_P0_1_SH)
-#define __APP_PLL_425_Z0_2_MK 0x000000e0
-#define __APP_PLL_425_Z0_2_SH 5
-#define __APP_PLL_425_Z0_2(_v) ((_v) << __APP_PLL_425_Z0_2_SH)
-#define __APP_PLL_425_RSEL200500 0x00000010
-#define __APP_PLL_425_ENARST 0x00000008
-#define __APP_PLL_425_BYPASS 0x00000004
-#define __APP_PLL_425_LRESETN 0x00000002
-#define __APP_PLL_425_ENABLE 0x00000001
-#define APP_PLL_312_CTL_REG 0x00014208
-#define __P_312_PLL_LOCK 0x80000000
-#define __ENABLE_MAC_AHB_1 0x00800000
-#define __ENABLE_MAC_AHB_0 0x00400000
-#define __ENABLE_MAC_1 0x00200000
-#define __ENABLE_MAC_0 0x00100000
-#define __APP_PLL_312_RESET_TIMER_MK 0x000e0000
-#define __APP_PLL_312_RESET_TIMER_SH 17
-#define __APP_PLL_312_RESET_TIMER(_v) ((_v) << __APP_PLL_312_RESET_TIMER_SH)
-#define __APP_PLL_312_LOGIC_SOFT_RESET 0x00010000
-#define __APP_PLL_312_CNTLMT0_1_MK 0x0000c000
-#define __APP_PLL_312_CNTLMT0_1_SH 14
-#define __APP_PLL_312_CNTLMT0_1(_v) ((_v) << __APP_PLL_312_CNTLMT0_1_SH)
-#define __APP_PLL_312_JITLMT0_1_MK 0x00003000
-#define __APP_PLL_312_JITLMT0_1_SH 12
-#define __APP_PLL_312_JITLMT0_1(_v) ((_v) << __APP_PLL_312_JITLMT0_1_SH)
-#define __APP_PLL_312_HREF 0x00000800
-#define __APP_PLL_312_HDIV 0x00000400
-#define __APP_PLL_312_P0_1_MK 0x00000300
-#define __APP_PLL_312_P0_1_SH 8
-#define __APP_PLL_312_P0_1(_v) ((_v) << __APP_PLL_312_P0_1_SH)
-#define __APP_PLL_312_Z0_2_MK 0x000000e0
-#define __APP_PLL_312_Z0_2_SH 5
-#define __APP_PLL_312_Z0_2(_v) ((_v) << __APP_PLL_312_Z0_2_SH)
-#define __APP_PLL_312_RSEL200500 0x00000010
-#define __APP_PLL_312_ENARST 0x00000008
-#define __APP_PLL_312_BYPASS 0x00000004
-#define __APP_PLL_312_LRESETN 0x00000002
-#define __APP_PLL_312_ENABLE 0x00000001
-#define MBIST_CTL_REG 0x00014220
-#define __EDRAM_BISTR_START 0x00000004
-#define __MBIST_RESET 0x00000002
-#define __MBIST_START 0x00000001
-#define MBIST_STAT_REG 0x00014224
-#define __EDRAM_BISTR_STATUS 0x00000008
-#define __EDRAM_BISTR_DONE 0x00000004
-#define __MEM_BIT_STATUS 0x00000002
-#define __MBIST_DONE 0x00000001
-#define HOST_SEM0_REG 0x00014230
-#define __HOST_SEMAPHORE 0x00000001
-#define HOST_SEM1_REG 0x00014234
-#define HOST_SEM2_REG 0x00014238
-#define HOST_SEM3_REG 0x0001423c
-#define HOST_SEM0_INFO_REG 0x00014240
-#define HOST_SEM1_INFO_REG 0x00014244
-#define HOST_SEM2_INFO_REG 0x00014248
-#define HOST_SEM3_INFO_REG 0x0001424c
-#define ETH_MAC_SER_REG 0x00014288
-#define __APP_EMS_CKBUFAMPIN 0x00000020
-#define __APP_EMS_REFCLKSEL 0x00000010
-#define __APP_EMS_CMLCKSEL 0x00000008
-#define __APP_EMS_REFCKBUFEN2 0x00000004
-#define __APP_EMS_REFCKBUFEN1 0x00000002
-#define __APP_EMS_CHANNEL_SEL 0x00000001
-#define HOSTFN2_INT_STATUS 0x00014300
-#define __HOSTFN2_HALT_OCCURRED 0x01000000
-#define __HOSTFN2_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN2_INT_STATUS_LVL_SH 20
-#define __HOSTFN2_INT_STATUS_LVL(_v) ((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
-#define __HOSTFN2_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN2_INT_STATUS_P_SH 16
-#define __HOSTFN2_INT_STATUS_P(_v) ((_v) << __HOSTFN2_INT_STATUS_P_SH)
-#define __HOSTFN2_INT_STATUS_F 0x0000ffff
-#define HOSTFN2_INT_MSK 0x00014304
-#define HOST_PAGE_NUM_FN2 0x00014308
-#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c
-#define HOSTFN3_INT_STATUS 0x00014400
-#define __HALT_OCCURRED 0x01000000
-#define __HOSTFN3_INT_STATUS_LVL_MK 0x00f00000
-#define __HOSTFN3_INT_STATUS_LVL_SH 20
-#define __HOSTFN3_INT_STATUS_LVL(_v) ((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
-#define __HOSTFN3_INT_STATUS_P_MK 0x000f0000
-#define __HOSTFN3_INT_STATUS_P_SH 16
-#define __HOSTFN3_INT_STATUS_P(_v) ((_v) << __HOSTFN3_INT_STATUS_P_SH)
-#define __HOSTFN3_INT_STATUS_F 0x0000ffff
-#define HOSTFN3_INT_MSK 0x00014404
-#define HOST_PAGE_NUM_FN3 0x00014408
-#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c
-#define FNC_ID_REG 0x00014600
-#define __FUNCTION_NUMBER 0x00000007
-#define FNC_PERS_REG 0x00014604
-#define __F3_FUNCTION_ACTIVE 0x80000000
-#define __F3_FUNCTION_MODE 0x40000000
-#define __F3_PORT_MAP_MK 0x30000000
-#define __F3_PORT_MAP_SH 28
-#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
-#define __F3_VM_MODE 0x08000000
-#define __F3_INTX_STATUS_MK 0x07000000
-#define __F3_INTX_STATUS_SH 24
-#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
-#define __F2_FUNCTION_ACTIVE 0x00800000
-#define __F2_FUNCTION_MODE 0x00400000
-#define __F2_PORT_MAP_MK 0x00300000
-#define __F2_PORT_MAP_SH 20
-#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
-#define __F2_VM_MODE 0x00080000
-#define __F2_INTX_STATUS_MK 0x00070000
-#define __F2_INTX_STATUS_SH 16
-#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
-#define __F1_FUNCTION_ACTIVE 0x00008000
-#define __F1_FUNCTION_MODE 0x00004000
-#define __F1_PORT_MAP_MK 0x00003000
-#define __F1_PORT_MAP_SH 12
-#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
-#define __F1_VM_MODE 0x00000800
-#define __F1_INTX_STATUS_MK 0x00000700
-#define __F1_INTX_STATUS_SH 8
-#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
-#define __F0_FUNCTION_ACTIVE 0x00000080
-#define __F0_FUNCTION_MODE 0x00000040
-#define __F0_PORT_MAP_MK 0x00000030
-#define __F0_PORT_MAP_SH 4
-#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
-#define __F0_VM_MODE 0x00000008
-#define __F0_INTX_STATUS 0x00000007
-enum {
- __F0_INTX_STATUS_MSIX = 0x0,
- __F0_INTX_STATUS_INTA = 0x1,
- __F0_INTX_STATUS_INTB = 0x2,
- __F0_INTX_STATUS_INTC = 0x3,
- __F0_INTX_STATUS_INTD = 0x4,
-};
-#define OP_MODE 0x0001460c
-#define __APP_ETH_CLK_LOWSPEED 0x00000004
-#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
-#define __GLOBAL_FCOE_MODE 0x00000001
-#define HOST_SEM4_REG 0x00014610
-#define HOST_SEM5_REG 0x00014614
-#define HOST_SEM6_REG 0x00014618
-#define HOST_SEM7_REG 0x0001461c
-#define HOST_SEM4_INFO_REG 0x00014620
-#define HOST_SEM5_INFO_REG 0x00014624
-#define HOST_SEM6_INFO_REG 0x00014628
-#define HOST_SEM7_INFO_REG 0x0001462c
-#define HOSTFN0_LPU0_MBOX0_CMD_STAT 0x00019000
-#define __HOSTFN0_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN0_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN0_LPU1_MBOX0_CMD_STAT 0x00019004
-#define __HOSTFN0_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN0_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN0_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_MBOX0_CMD_STAT 0x00019008
-#define __LPU0_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN0_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN0_MBOX0_CMD_STAT 0x0001900c
-#define __LPU1_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN0_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU0_MBOX0_CMD_STAT 0x00019010
-#define __HOSTFN1_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN1_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_MBOX0_CMD_STAT 0x00019014
-#define __HOSTFN1_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN1_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN1_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN1_MBOX0_CMD_STAT 0x00019018
-#define __LPU0_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN1_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_MBOX0_CMD_STAT 0x0001901c
-#define __LPU1_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN1_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU0_MBOX0_CMD_STAT 0x00019150
-#define __HOSTFN2_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN2_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN2_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU1_MBOX0_CMD_STAT 0x00019154
-#define __HOSTFN2_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN2_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN2_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN2_MBOX0_CMD_STAT 0x00019158
-#define __LPU0_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN2_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN2_MBOX0_CMD_STAT 0x0001915c
-#define __LPU1_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN2_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU0_MBOX0_CMD_STAT 0x00019160
-#define __HOSTFN3_LPU0_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN3_LPU0_MBOX0_INFO_SH 1
-#define __HOSTFN3_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU1_MBOX0_CMD_STAT 0x00019164
-#define __HOSTFN3_LPU1_MBOX0_INFO_MK 0xfffffffe
-#define __HOSTFN3_LPU1_MBOX0_INFO_SH 1
-#define __HOSTFN3_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN3_MBOX0_CMD_STAT 0x00019168
-#define __LPU0_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
-#define __LPU0_HOSTFN3_MBOX0_INFO_SH 1
-#define __LPU0_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN3_MBOX0_CMD_STAT 0x0001916c
-#define __LPU1_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
-#define __LPU1_HOSTFN3_MBOX0_INFO_SH 1
-#define __LPU1_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define FW_INIT_HALT_P0 0x000191ac
-#define __FW_INIT_HALT_P 0x00000001
-#define FW_INIT_HALT_P1 0x000191bc
-#define CPE_PI_PTR_Q0 0x00038000
-#define __CPE_PI_UNUSED_MK 0xffff0000
-#define __CPE_PI_UNUSED_SH 16
-#define __CPE_PI_UNUSED(_v) ((_v) << __CPE_PI_UNUSED_SH)
-#define __CPE_PI_PTR 0x0000ffff
-#define CPE_PI_PTR_Q1 0x00038040
-#define CPE_CI_PTR_Q0 0x00038004
-#define __CPE_CI_UNUSED_MK 0xffff0000
-#define __CPE_CI_UNUSED_SH 16
-#define __CPE_CI_UNUSED(_v) ((_v) << __CPE_CI_UNUSED_SH)
-#define __CPE_CI_PTR 0x0000ffff
-#define CPE_CI_PTR_Q1 0x00038044
-#define CPE_DEPTH_Q0 0x00038008
-#define __CPE_DEPTH_UNUSED_MK 0xf8000000
-#define __CPE_DEPTH_UNUSED_SH 27
-#define __CPE_DEPTH_UNUSED(_v) ((_v) << __CPE_DEPTH_UNUSED_SH)
-#define __CPE_MSIX_VEC_INDEX_MK 0x07ff0000
-#define __CPE_MSIX_VEC_INDEX_SH 16
-#define __CPE_MSIX_VEC_INDEX(_v) ((_v) << __CPE_MSIX_VEC_INDEX_SH)
-#define __CPE_DEPTH 0x0000ffff
-#define CPE_DEPTH_Q1 0x00038048
-#define CPE_QCTRL_Q0 0x0003800c
-#define __CPE_CTRL_UNUSED30_MK 0xfc000000
-#define __CPE_CTRL_UNUSED30_SH 26
-#define __CPE_CTRL_UNUSED30(_v) ((_v) << __CPE_CTRL_UNUSED30_SH)
-#define __CPE_FUNC_INT_CTRL_MK 0x03000000
-#define __CPE_FUNC_INT_CTRL_SH 24
-#define __CPE_FUNC_INT_CTRL(_v) ((_v) << __CPE_FUNC_INT_CTRL_SH)
-enum {
- __CPE_FUNC_INT_CTRL_DISABLE = 0x0,
- __CPE_FUNC_INT_CTRL_F2NF = 0x1,
- __CPE_FUNC_INT_CTRL_3QUART = 0x2,
- __CPE_FUNC_INT_CTRL_HALF = 0x3,
-};
-#define __CPE_CTRL_UNUSED20_MK 0x00f00000
-#define __CPE_CTRL_UNUSED20_SH 20
-#define __CPE_CTRL_UNUSED20(_v) ((_v) << __CPE_CTRL_UNUSED20_SH)
-#define __CPE_SCI_TH_MK 0x000f0000
-#define __CPE_SCI_TH_SH 16
-#define __CPE_SCI_TH(_v) ((_v) << __CPE_SCI_TH_SH)
-#define __CPE_CTRL_UNUSED10_MK 0x0000c000
-#define __CPE_CTRL_UNUSED10_SH 14
-#define __CPE_CTRL_UNUSED10(_v) ((_v) << __CPE_CTRL_UNUSED10_SH)
-#define __CPE_ACK_PENDING 0x00002000
-#define __CPE_CTRL_UNUSED40_MK 0x00001c00
-#define __CPE_CTRL_UNUSED40_SH 10
-#define __CPE_CTRL_UNUSED40(_v) ((_v) << __CPE_CTRL_UNUSED40_SH)
-#define __CPE_PCIEID_MK 0x00000300
-#define __CPE_PCIEID_SH 8
-#define __CPE_PCIEID(_v) ((_v) << __CPE_PCIEID_SH)
-#define __CPE_CTRL_UNUSED00_MK 0x000000fe
-#define __CPE_CTRL_UNUSED00_SH 1
-#define __CPE_CTRL_UNUSED00(_v) ((_v) << __CPE_CTRL_UNUSED00_SH)
-#define __CPE_ESIZE 0x00000001
-#define CPE_QCTRL_Q1 0x0003804c
-#define __CPE_CTRL_UNUSED31_MK 0xfc000000
-#define __CPE_CTRL_UNUSED31_SH 26
-#define __CPE_CTRL_UNUSED31(_v) ((_v) << __CPE_CTRL_UNUSED31_SH)
-#define __CPE_CTRL_UNUSED21_MK 0x00f00000
-#define __CPE_CTRL_UNUSED21_SH 20
-#define __CPE_CTRL_UNUSED21(_v) ((_v) << __CPE_CTRL_UNUSED21_SH)
-#define __CPE_CTRL_UNUSED11_MK 0x0000c000
-#define __CPE_CTRL_UNUSED11_SH 14
-#define __CPE_CTRL_UNUSED11(_v) ((_v) << __CPE_CTRL_UNUSED11_SH)
-#define __CPE_CTRL_UNUSED41_MK 0x00001c00
-#define __CPE_CTRL_UNUSED41_SH 10
-#define __CPE_CTRL_UNUSED41(_v) ((_v) << __CPE_CTRL_UNUSED41_SH)
-#define __CPE_CTRL_UNUSED01_MK 0x000000fe
-#define __CPE_CTRL_UNUSED01_SH 1
-#define __CPE_CTRL_UNUSED01(_v) ((_v) << __CPE_CTRL_UNUSED01_SH)
-#define RME_PI_PTR_Q0 0x00038020
-#define __LATENCY_TIME_STAMP_MK 0xffff0000
-#define __LATENCY_TIME_STAMP_SH 16
-#define __LATENCY_TIME_STAMP(_v) ((_v) << __LATENCY_TIME_STAMP_SH)
-#define __RME_PI_PTR 0x0000ffff
-#define RME_PI_PTR_Q1 0x00038060
-#define RME_CI_PTR_Q0 0x00038024
-#define __DELAY_TIME_STAMP_MK 0xffff0000
-#define __DELAY_TIME_STAMP_SH 16
-#define __DELAY_TIME_STAMP(_v) ((_v) << __DELAY_TIME_STAMP_SH)
-#define __RME_CI_PTR 0x0000ffff
-#define RME_CI_PTR_Q1 0x00038064
-#define RME_DEPTH_Q0 0x00038028
-#define __RME_DEPTH_UNUSED_MK 0xf8000000
-#define __RME_DEPTH_UNUSED_SH 27
-#define __RME_DEPTH_UNUSED(_v) ((_v) << __RME_DEPTH_UNUSED_SH)
-#define __RME_MSIX_VEC_INDEX_MK 0x07ff0000
-#define __RME_MSIX_VEC_INDEX_SH 16
-#define __RME_MSIX_VEC_INDEX(_v) ((_v) << __RME_MSIX_VEC_INDEX_SH)
-#define __RME_DEPTH 0x0000ffff
-#define RME_DEPTH_Q1 0x00038068
-#define RME_QCTRL_Q0 0x0003802c
-#define __RME_INT_LATENCY_TIMER_MK 0xff000000
-#define __RME_INT_LATENCY_TIMER_SH 24
-#define __RME_INT_LATENCY_TIMER(_v) ((_v) << __RME_INT_LATENCY_TIMER_SH)
-#define __RME_INT_DELAY_TIMER_MK 0x00ff0000
-#define __RME_INT_DELAY_TIMER_SH 16
-#define __RME_INT_DELAY_TIMER(_v) ((_v) << __RME_INT_DELAY_TIMER_SH)
-#define __RME_INT_DELAY_DISABLE 0x00008000
-#define __RME_DLY_DELAY_DISABLE 0x00004000
-#define __RME_ACK_PENDING 0x00002000
-#define __RME_FULL_INTERRUPT_DISABLE 0x00001000
-#define __RME_CTRL_UNUSED10_MK 0x00000c00
-#define __RME_CTRL_UNUSED10_SH 10
-#define __RME_CTRL_UNUSED10(_v) ((_v) << __RME_CTRL_UNUSED10_SH)
-#define __RME_PCIEID_MK 0x00000300
-#define __RME_PCIEID_SH 8
-#define __RME_PCIEID(_v) ((_v) << __RME_PCIEID_SH)
-#define __RME_CTRL_UNUSED00_MK 0x000000fe
-#define __RME_CTRL_UNUSED00_SH 1
-#define __RME_CTRL_UNUSED00(_v) ((_v) << __RME_CTRL_UNUSED00_SH)
-#define __RME_ESIZE 0x00000001
-#define RME_QCTRL_Q1 0x0003806c
-#define __RME_CTRL_UNUSED11_MK 0x00000c00
-#define __RME_CTRL_UNUSED11_SH 10
-#define __RME_CTRL_UNUSED11(_v) ((_v) << __RME_CTRL_UNUSED11_SH)
-#define __RME_CTRL_UNUSED01_MK 0x000000fe
-#define __RME_CTRL_UNUSED01_SH 1
-#define __RME_CTRL_UNUSED01(_v) ((_v) << __RME_CTRL_UNUSED01_SH)
-#define PSS_CTL_REG 0x00018800
-#define __PSS_I2C_CLK_DIV_MK 0x007f0000
-#define __PSS_I2C_CLK_DIV_SH 16
-#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE 0x00001000
-#define __PSS_LMEM_RESET 0x00000200
-#define __PSS_LMEM_INIT_EN 0x00000100
-#define __PSS_LPU1_RESET 0x00000002
-#define __PSS_LPU0_RESET 0x00000001
-#define PSS_ERR_STATUS_REG 0x00018810
-#define __PSS_LPU1_TCM_READ_ERR 0x00200000
-#define __PSS_LPU0_TCM_READ_ERR 0x00100000
-#define __PSS_LMEM5_CORR_ERR 0x00080000
-#define __PSS_LMEM4_CORR_ERR 0x00040000
-#define __PSS_LMEM3_CORR_ERR 0x00020000
-#define __PSS_LMEM2_CORR_ERR 0x00010000
-#define __PSS_LMEM1_CORR_ERR 0x00008000
-#define __PSS_LMEM0_CORR_ERR 0x00004000
-#define __PSS_LMEM5_UNCORR_ERR 0x00002000
-#define __PSS_LMEM4_UNCORR_ERR 0x00001000
-#define __PSS_LMEM3_UNCORR_ERR 0x00000800
-#define __PSS_LMEM2_UNCORR_ERR 0x00000400
-#define __PSS_LMEM1_UNCORR_ERR 0x00000200
-#define __PSS_LMEM0_UNCORR_ERR 0x00000100
-#define __PSS_BAL_PERR 0x00000080
-#define __PSS_DIP_IF_ERR 0x00000040
-#define __PSS_IOH_IF_ERR 0x00000020
-#define __PSS_TDS_IF_ERR 0x00000010
-#define __PSS_RDS_IF_ERR 0x00000008
-#define __PSS_SGM_IF_ERR 0x00000004
-#define __PSS_LPU1_RAM_ERR 0x00000002
-#define __PSS_LPU0_RAM_ERR 0x00000001
-#define ERR_SET_REG 0x00018818
-#define __PSS_ERR_STATUS_SET 0x003fffff
-#define PMM_1T_RESET_REG_P0 0x0002381c
-#define __PMM_1T_RESET_P 0x00000001
-#define PMM_1T_RESET_REG_P1 0x00023c1c
-#define HQM_QSET0_RXQ_DRBL_P0 0x00038000
-#define __RXQ0_ADD_VECTORS_P 0x80000000
-#define __RXQ0_STOP_P 0x40000000
-#define __RXQ0_PRD_PTR_P 0x0000ffff
-#define HQM_QSET1_RXQ_DRBL_P0 0x00038080
-#define __RXQ1_ADD_VECTORS_P 0x80000000
-#define __RXQ1_STOP_P 0x40000000
-#define __RXQ1_PRD_PTR_P 0x0000ffff
-#define HQM_QSET0_RXQ_DRBL_P1 0x0003c000
-#define HQM_QSET1_RXQ_DRBL_P1 0x0003c080
-#define HQM_QSET0_TXQ_DRBL_P0 0x00038020
-#define __TXQ0_ADD_VECTORS_P 0x80000000
-#define __TXQ0_STOP_P 0x40000000
-#define __TXQ0_PRD_PTR_P 0x0000ffff
-#define HQM_QSET1_TXQ_DRBL_P0 0x000380a0
-#define __TXQ1_ADD_VECTORS_P 0x80000000
-#define __TXQ1_STOP_P 0x40000000
-#define __TXQ1_PRD_PTR_P 0x0000ffff
-#define HQM_QSET0_TXQ_DRBL_P1 0x0003c020
-#define HQM_QSET1_TXQ_DRBL_P1 0x0003c0a0
-#define HQM_QSET0_IB_DRBL_1_P0 0x00038040
-#define __IB1_0_ACK_P 0x80000000
-#define __IB1_0_DISABLE_P 0x40000000
-#define __IB1_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET1_IB_DRBL_1_P0 0x000380c0
-#define __IB1_1_ACK_P 0x80000000
-#define __IB1_1_DISABLE_P 0x40000000
-#define __IB1_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET0_IB_DRBL_1_P1 0x0003c040
-#define HQM_QSET1_IB_DRBL_1_P1 0x0003c0c0
-#define HQM_QSET0_IB_DRBL_2_P0 0x00038060
-#define __IB2_0_ACK_P 0x80000000
-#define __IB2_0_DISABLE_P 0x40000000
-#define __IB2_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET1_IB_DRBL_2_P0 0x000380e0
-#define __IB2_1_ACK_P 0x80000000
-#define __IB2_1_DISABLE_P 0x40000000
-#define __IB2_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
-#define HQM_QSET0_IB_DRBL_2_P1 0x0003c060
-#define HQM_QSET1_IB_DRBL_2_P1 0x0003c0e0
-
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
-#define __EMPHPRE_AT_4G_FIX 0x00000003
-#define __SFP_TXRATE_EN_FIX 0x00000100
-#define __SFP_RXRATE_EN_FIX 0x00000080
-
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
-
-#define CPE_DEPTH_Q(__n) \
- (CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
-#define CPE_QCTRL_Q(__n) \
- (CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
-#define CPE_PI_PTR_Q(__n) \
- (CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
-#define CPE_CI_PTR_Q(__n) \
- (CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
-#define RME_DEPTH_Q(__n) \
- (RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
-#define RME_QCTRL_Q(__n) \
- (RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
-#define RME_PI_PTR_Q(__n) \
- (RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
-#define RME_CI_PTR_Q(__n) \
- (RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) \
- (HQM_QSET0_RXQ_DRBL_P0 + (__n) * (HQM_QSET1_RXQ_DRBL_P0 - \
- HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) \
- (HQM_QSET0_TXQ_DRBL_P0 + (__n) * (HQM_QSET1_TXQ_DRBL_P0 - \
- HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) \
- (HQM_QSET0_IB_DRBL_1_P0 + (__n) * (HQM_QSET1_IB_DRBL_1_P0 - \
- HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) \
- (HQM_QSET0_IB_DRBL_2_P0 + (__n) * (HQM_QSET1_IB_DRBL_2_P0 - \
- HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) \
- (HQM_QSET0_RXQ_DRBL_P1 + (__n) * (HQM_QSET1_RXQ_DRBL_P1 - \
- HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) \
- (HQM_QSET0_TXQ_DRBL_P1 + (__n) * (HQM_QSET1_TXQ_DRBL_P1 - \
- HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) \
- (HQM_QSET0_IB_DRBL_1_P1 + (__n) * (HQM_QSET1_IB_DRBL_1_P1 - \
- HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) \
- (HQM_QSET0_IB_DRBL_2_P1 + (__n) * (HQM_QSET1_IB_DRBL_2_P1 - \
- HQM_QSET0_IB_DRBL_2_P1))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
- BFA_MSIX_CPE_Q0 = 0,
- BFA_MSIX_CPE_Q1 = 1,
- BFA_MSIX_CPE_Q2 = 2,
- BFA_MSIX_CPE_Q3 = 3,
- BFA_MSIX_RME_Q0 = 4,
- BFA_MSIX_RME_Q1 = 5,
- BFA_MSIX_RME_Q2 = 6,
- BFA_MSIX_RME_Q3 = 7,
- BFA_MSIX_LPU_ERR = 8,
- BFA_MSIX_CT_MAX = 9,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0 0x00000001U
-#define __HFN_INT_CPE_Q1 0x00000002U
-#define __HFN_INT_CPE_Q2 0x00000004U
-#define __HFN_INT_CPE_Q3 0x00000008U
-#define __HFN_INT_CPE_Q4 0x00000010U
-#define __HFN_INT_CPE_Q5 0x00000020U
-#define __HFN_INT_CPE_Q6 0x00000040U
-#define __HFN_INT_CPE_Q7 0x00000080U
-#define __HFN_INT_RME_Q0 0x00000100U
-#define __HFN_INT_RME_Q1 0x00000200U
-#define __HFN_INT_RME_Q2 0x00000400U
-#define __HFN_INT_RME_Q3 0x00000800U
-#define __HFN_INT_RME_Q4 0x00001000U
-#define __HFN_INT_RME_Q5 0x00002000U
-#define __HFN_INT_RME_Q6 0x00004000U
-#define __HFN_INT_RME_Q7 0x00008000U
-#define __HFN_INT_ERR_EMC 0x00010000U
-#define __HFN_INT_ERR_LPU0 0x00020000U
-#define __HFN_INT_ERR_LPU1 0x00040000U
-#define __HFN_INT_ERR_PSS 0x00080000U
-#define __HFN_INT_MBOX_LPU0 0x00100000U
-#define __HFN_INT_MBOX_LPU1 0x00200000U
-#define __HFN_INT_MBOX1_LPU0 0x00400000U
-#define __HFN_INT_MBOX1_LPU1 0x00800000U
-#define __HFN_INT_LL_HALT 0x01000000U
-#define __HFN_INT_CPE_MASK 0x000000ffU
-#define __HFN_INT_RME_MASK 0x0000ff00U
-
-
-/*
- * catapult memory map.
- */
-#define LL_PGN_HQM0 0x0096
-#define LL_PGN_HQM1 0x0097
-#define PSS_SMEM_PAGE_START 0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
-
-/*
- * End of catapult memory map
- */
-
-
-#endif /* __BFI_CTREG_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fabric.h b/drivers/scsi/bfa/include/bfi/bfi_fabric.h
deleted file mode 100644
index c0669ed..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fabric.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FABRIC_H__
-#define __BFI_FABRIC_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_fabric_h2i_msgs {
- BFI_FABRIC_H2I_CREATE_REQ = 1,
- BFI_FABRIC_H2I_DELETE_REQ = 2,
- BFI_FABRIC_H2I_SETAUTH = 3,
-};
-
-enum bfi_fabric_i2h_msgs {
- BFI_FABRIC_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_FABRIC_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_FABRIC_I2H_SETAUTH_RSP = BFA_I2HM(3),
- BFI_FABRIC_I2H_ONLINE = BFA_I2HM(4),
- BFI_FABRIC_I2H_OFFLINE = BFA_I2HM(5),
-};
-
-struct bfi_fabric_create_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u8 vf_en; /* virtual fabric enable */
- u8 rsvd;
- u16 vf_id; /* virtual fabric ID */
- wwn_t pwwn; /* port name */
- wwn_t nwwn; /* node name */
-};
-
-struct bfi_fabric_create_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host fabric handle */
- u8 status; /* fabric create status */
- u8 rsvd;
-};
-
-struct bfi_fabric_delete_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* firmware fabric handle */
- u16 rsvd;
-};
-
-struct bfi_fabric_delete_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host fabric handle */
- u8 status; /* fabric deletion status */
- u8 rsvd;
-};
-
-#define BFI_FABRIC_AUTHSECRET_LEN 64
-struct bfi_fabric_setauth_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* f/w handle of fabric */
- u8 algorithm;
- u8 group;
- u8 secret[BFI_FABRIC_AUTHSECRET_LEN];
-};
-
-union bfi_fabric_h2i_msg_u {
- bfi_msg_t *msg;
- struct bfi_fabric_create_req_s *create_req;
- struct bfi_fabric_delete_req_s *delete_req;
-};
-
-union bfi_fabric_i2h_msg_u {
- bfi_msg_t *msg;
- struct bfi_fabric_create_rsp_s *create_rsp;
- struct bfi_fabric_delete_rsp_s *delete_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_FABRIC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
deleted file mode 100644
index 52c059f..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FCPIM_H__
-#define __BFI_FCPIM_H__
-
-#include "bfi.h"
-#include <protocol/fcp.h>
-
-#pragma pack(1)
-
-/*
- * Initiator mode I-T nexus interface defines.
- */
-
-enum bfi_itnim_h2i {
- BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */
- BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */
-};
-
-enum bfi_itnim_i2h {
- BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
-};
-
-struct bfi_itnim_create_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* f/w handle for itnim */
- u8 class; /* FC class for IO */
- u8 seq_rec; /* sequence recovery support */
- u8 msg_no; /* seq id of the msg */
-};
-
-struct bfi_itnim_create_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u8 status; /* fcp request status */
- u8 seq_id; /* seq id of the msg */
-};
-
-struct bfi_itnim_delete_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* f/w itnim handle */
- u8 seq_id; /* seq id of the msg */
- u8 rsvd;
-};
-
-struct bfi_itnim_delete_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u8 status; /* fcp request status */
- u8 seq_id; /* seq id of the msg */
-};
-
-struct bfi_itnim_sler_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* bfa handle for itnim */
- u16 rsvd;
-};
-
-union bfi_itnim_h2i_msg_u {
- struct bfi_itnim_create_req_s *create_req;
- struct bfi_itnim_delete_req_s *delete_req;
- struct bfi_msg_s *msg;
-};
-
-union bfi_itnim_i2h_msg_u {
- struct bfi_itnim_create_rsp_s *create_rsp;
- struct bfi_itnim_delete_rsp_s *delete_rsp;
- struct bfi_itnim_sler_event_s *sler_event;
- struct bfi_msg_s *msg;
-};
-
-/*
- * Initiator mode IO interface defines.
- */
-
-enum bfi_ioim_h2i {
- BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */
- BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */
-};
-
-enum bfi_ioim_i2h {
- BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */
- BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */
-};
-
-/**
- * IO command DIF info
- */
-struct bfi_ioim_dif_s {
- u32 dif_info[4];
-};
-
-/**
- * FCP IO messages overview
- *
- * @note
- * - Max CDB length supported is 64 bytes.
- * - SCSI Linked commands and SCSI bi-directional Commands not
- * supported.
- *
- */
-struct bfi_ioim_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 io_tag; /* I/O tag */
- u16 rport_hdl; /* itnim/rport firmware handle */
- struct fcp_cmnd_s cmnd; /* IO request info */
-
- /**
- * SG elements array within the IO request must be double word
- * aligned. This aligment is required to optimize SGM setup for the IO.
- */
- struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
- u8 io_timeout;
- u8 dif_en;
- u8 rsvd_a[2];
- struct bfi_ioim_dif_s dif;
-};
-
-/**
- * This table shows various IO status codes from firmware and their
- * meaning. Host driver can use these status codes to further process
- * IO completions.
- *
- * BFI_IOIM_STS_OK : IO completed with error free SCSI &
- * transport status.
- * - io-tag can be reused.
- *
- * BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error.
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to
- * host request.
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_ABORTED : IO was aborted successfully
- * internally by f/w.
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening
- * in the firmware and
- * - io-tag cannot be reused yet.
- *
- * BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO
- * with sequence level error
- * logic and hence host needs to retry
- * this IO with a different IO tag
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host
- * is required because 2 consecutive ABTS
- * timedout and host needs logout and
- * re-login with the target
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good,
- * but the data tranferred is less than
- * the fcp data length in the command.
- * ex. SCSI INQUIRY where transferred
- * data length and residue count in FCP
- * response accounts for total fcp-dl
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good,
- * but the data transerred is more than
- * fcp data length in the command. ex.
- * TAPE IOs where blocks can of unequal
- * lengths.
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag
- * during abort process
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error.
- * ex target sent more data than
- * requested, or there was data frame
- * loss and other reasons
- * - io-tag cannot be used yet.
- *
- * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
- * CRC err or Ref Tag err or App tag err.
- * - io-tag can be reused.
- *
- * BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task
- * Management command from the host
- * - io-tag can be reused.
- *
- * BFI_IOIM_STS_UTAG : Firmware does not know about this
- * io_tag.
- * - io-tag can be reused.
- */
-enum bfi_ioim_status {
- BFI_IOIM_STS_OK = 0,
- BFI_IOIM_STS_HOST_ABORTED = 1,
- BFI_IOIM_STS_ABORTED = 2,
- BFI_IOIM_STS_TIMEDOUT = 3,
- BFI_IOIM_STS_RES_FREE = 4,
- BFI_IOIM_STS_SQER_NEEDED = 5,
- BFI_IOIM_STS_PROTO_ERR = 6,
- BFI_IOIM_STS_UTAG = 7,
- BFI_IOIM_STS_PATHTOV = 8,
-};
-
-#define BFI_IOIM_SNSLEN (256)
-/**
- * I/O response message
- */
-struct bfi_ioim_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 io_tag; /* completed IO tag */
- u16 bfa_rport_hndl; /* releated rport handle */
- u8 io_status; /* IO completion status */
- u8 reuse_io_tag; /* IO tag can be reused */
- u16 abort_tag; /* host abort request tag */
- u8 scsi_status; /* scsi status from target */
- u8 sns_len; /* scsi sense length */
- u8 resid_flags; /* IO residue flags */
- u8 rsvd_a;
- u32 residue; /* IO residual length in bytes */
- u32 rsvd_b[3];
-};
-
-struct bfi_ioim_abort_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 io_tag; /* I/O tag */
- u16 abort_tag; /* unique request tag */
-};
-
-/*
- * Initiator mode task management command interface defines.
- */
-
-enum bfi_tskim_h2i {
- BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */
- BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */
-};
-
-enum bfi_tskim_i2h {
- BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
-};
-
-struct bfi_tskim_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task management tag */
- u16 itn_fhdl; /* itn firmware handle */
- lun_t lun; /* LU number */
- u8 tm_flags; /* see fcp_tm_cmnd_t */
- u8 t_secs; /* Timeout value in seconds */
- u8 rsvd[2];
-};
-
-struct bfi_tskim_abortreq_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task management tag */
- u16 rsvd;
-};
-
-enum bfi_tskim_status {
- /*
- * Following are FCP-4 spec defined status codes,
- * **DO NOT CHANGE THEM **
- */
- BFI_TSKIM_STS_OK = 0,
- BFI_TSKIM_STS_NOT_SUPP = 4,
- BFI_TSKIM_STS_FAILED = 5,
-
- /**
- * Defined by BFA
- */
- BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */
- BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */
-};
-
-struct bfi_tskim_rsp_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 tsk_tag; /* task mgmt cmnd tag */
- u8 tsk_status; /* @ref bfi_tskim_status */
- u8 rsvd;
-};
-
-#pragma pack()
-
-#endif /* __BFI_FCPIM_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcxp.h b/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
deleted file mode 100644
index e0e995a..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_fcxp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_FCXP_H__
-#define __BFI_FCXP_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-enum bfi_fcxp_h2i {
- BFI_FCXP_H2I_SEND_REQ = 1,
-};
-
-enum bfi_fcxp_i2h {
- BFI_FCXP_I2H_SEND_RSP = BFA_I2HM(1),
-};
-
-#define BFA_FCXP_MAX_SGES 2
-
-/**
- * FCXP send request structure
- */
-struct bfi_fcxp_send_req_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 fcxp_tag; /* driver request tag */
- u16 max_frmsz; /* max send frame size */
- u16 vf_id; /* vsan tag if applicable */
- u16 rport_fw_hndl; /* FW Handle for the remote port */
- u8 class; /* FC class used for req/rsp */
- u8 rsp_timeout; /* timeout in secs, 0-no response */
- u8 cts; /* continue sequence */
- u8 lp_tag; /* lport tag */
- struct fchs_s fchs; /* request FC header structure */
- u32 req_len; /* request payload length */
- u32 rsp_maxlen; /* max response length expected */
- struct bfi_sge_s req_sge[BFA_FCXP_MAX_SGES]; /* request buf */
- struct bfi_sge_s rsp_sge[BFA_FCXP_MAX_SGES]; /* response buf */
-};
-
-/**
- * FCXP send response structure
- */
-struct bfi_fcxp_send_rsp_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 fcxp_tag; /* send request tag */
- u8 req_status; /* request status */
- u8 rsvd;
- u32 rsp_len; /* actual response length */
- u32 residue_len; /* residual response length */
- struct fchs_s fchs; /* response FC header structure */
-};
-
-#pragma pack()
-
-#endif /* __BFI_FCXP_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ioc.h b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
deleted file mode 100644
index 450ded6..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_ioc.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_IOC_H__
-#define __BFI_IOC_H__
-
-#include "bfi.h"
-#include <defs/bfa_defs_ioc.h>
-
-#pragma pack(1)
-
-enum bfi_ioc_h2i_msgs {
- BFI_IOC_H2I_ENABLE_REQ = 1,
- BFI_IOC_H2I_DISABLE_REQ = 2,
- BFI_IOC_H2I_GETATTR_REQ = 3,
- BFI_IOC_H2I_DBG_SYNC = 4,
- BFI_IOC_H2I_DBG_DUMP = 5,
-};
-
-enum bfi_ioc_i2h_msgs {
- BFI_IOC_I2H_ENABLE_REPLY = BFA_I2HM(1),
- BFI_IOC_I2H_DISABLE_REPLY = BFA_I2HM(2),
- BFI_IOC_I2H_GETATTR_REPLY = BFA_I2HM(3),
- BFI_IOC_I2H_READY_EVENT = BFA_I2HM(4),
- BFI_IOC_I2H_HBEAT = BFA_I2HM(5),
-};
-
-/**
- * BFI_IOC_H2I_GETATTR_REQ message
- */
-struct bfi_ioc_getattr_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u attr_addr;
-};
-
-struct bfi_ioc_attr_s {
- wwn_t mfg_pwwn; /* Mfg port wwn */
- wwn_t mfg_nwwn; /* Mfg node wwn */
- mac_t mfg_mac; /* Mfg mac */
- u16 rsvd_a;
- wwn_t pwwn;
- wwn_t nwwn;
- mac_t mac; /* PBC or Mfg mac */
- u16 rsvd_b;
- char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
- u8 pcie_gen;
- u8 pcie_lanes_orig;
- u8 pcie_lanes;
- u8 rx_bbcredit; /* receive buffer credits */
- u32 adapter_prop; /* adapter properties */
- u16 maxfrsize; /* max receive frame size */
- char asic_rev;
- u8 rsvd_c;
- char fw_version[BFA_VERSION_LEN];
- char optrom_version[BFA_VERSION_LEN];
- struct bfa_mfg_vpd_s vpd;
- u32 card_type; /* card type */
-};
-
-/**
- * BFI_IOC_I2H_GETATTR_REPLY message
- */
-struct bfi_ioc_getattr_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 status; /* cfg reply status */
- u8 rsvd[3];
-};
-
-/**
- * Firmware memory page offsets
- */
-#define BFI_IOC_SMEM_PG0_CB (0x40)
-#define BFI_IOC_SMEM_PG0_CT (0x180)
-
-/**
- * Firmware trace offset
- */
-#define BFI_IOC_TRC_OFF (0x4b00)
-#define BFI_IOC_TRC_ENTS 256
-
-#define BFI_IOC_FW_SIGNATURE (0xbfadbfad)
-#define BFI_IOC_MD5SUM_SZ 4
-struct bfi_ioc_image_hdr_s {
- u32 signature; /* constant signature */
- u32 rsvd_a;
- u32 exec; /* exec vector */
- u32 param; /* parameters */
- u32 rsvd_b[4];
- u32 md5sum[BFI_IOC_MD5SUM_SZ];
-};
-
-/**
- * BFI_IOC_I2H_READY_EVENT message
- */
-struct bfi_ioc_rdy_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 init_status; /* init event status */
- u8 rsvd[3];
-};
-
-struct bfi_ioc_hbeat_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u32 hb_count; /* current heart beat count */
-};
-
-/**
- * IOC hardware/firmware state
- */
-enum bfi_ioc_state {
- BFI_IOC_UNINIT = 0, /* not initialized */
- BFI_IOC_INITING = 1, /* h/w is being initialized */
- BFI_IOC_HWINIT = 2, /* h/w is initialized */
- BFI_IOC_CFG = 3, /* IOC configuration in progress */
- BFI_IOC_OP = 4, /* IOC is operational */
- BFI_IOC_DISABLING = 5, /* IOC is being disabled */
- BFI_IOC_DISABLED = 6, /* IOC is disabled */
- BFI_IOC_CFG_DISABLED = 7, /* IOC is being disabled;transient */
- BFI_IOC_FAIL = 8, /* IOC heart-beat failure */
- BFI_IOC_MEMTEST = 9, /* IOC is doing memtest */
-};
-
-#define BFI_IOC_ENDIAN_SIG 0x12345678
-
-enum {
- BFI_ADAPTER_TYPE_FC = 0x01, /* FC adapters */
- BFI_ADAPTER_TYPE_MK = 0x0f0000, /* adapter type mask */
- BFI_ADAPTER_TYPE_SH = 16, /* adapter type shift */
- BFI_ADAPTER_NPORTS_MK = 0xff00, /* number of ports mask */
- BFI_ADAPTER_NPORTS_SH = 8, /* number of ports shift */
- BFI_ADAPTER_SPEED_MK = 0xff, /* adapter speed mask */
- BFI_ADAPTER_SPEED_SH = 0, /* adapter speed shift */
- BFI_ADAPTER_PROTO = 0x100000, /* prototype adapaters */
- BFI_ADAPTER_TTV = 0x200000, /* TTV debug capable */
- BFI_ADAPTER_UNSUPP = 0x400000, /* unknown adapter type */
-};
-
-#define BFI_ADAPTER_GETP(__prop, __adap_prop) \
- (((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >> \
- BFI_ADAPTER_ ## __prop ## _SH)
-#define BFI_ADAPTER_SETP(__prop, __val) \
- ((__val) << BFI_ADAPTER_ ## __prop ## _SH)
-#define BFI_ADAPTER_IS_PROTO(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_PROTO)
-#define BFI_ADAPTER_IS_TTV(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_TTV)
-#define BFI_ADAPTER_IS_UNSUPP(__adap_type) \
- ((__adap_type) & BFI_ADAPTER_UNSUPP)
-#define BFI_ADAPTER_IS_SPECIAL(__adap_type) \
- ((__adap_type) & (BFI_ADAPTER_TTV | BFI_ADAPTER_PROTO | \
- BFI_ADAPTER_UNSUPP))
-
-/**
- * BFI_IOC_H2I_ENABLE_REQ & BFI_IOC_H2I_DISABLE_REQ messages
- */
-struct bfi_ioc_ctrl_req_s {
- struct bfi_mhdr_s mh;
- u8 ioc_class;
- u8 rsvd[3];
-};
-
-/**
- * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
- */
-struct bfi_ioc_ctrl_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 status; /* enable/disable status */
- u8 rsvd[3];
-};
-
-#define BFI_IOC_MSGSZ 8
-/**
- * H2I Messages
- */
-union bfi_ioc_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_ioc_ctrl_req_s enable_req;
- struct bfi_ioc_ctrl_req_s disable_req;
- struct bfi_ioc_getattr_req_s getattr_req;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-/**
- * I2H Messages
- */
-union bfi_ioc_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_ioc_rdy_event_s rdy_event;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-#pragma pack()
-
-#endif /* __BFI_IOC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_iocfc.h b/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
deleted file mode 100644
index ccdfcc5..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_iocfc.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_IOCFC_H__
-#define __BFI_IOCFC_H__
-
-#include "bfi.h"
-#include <bfi/bfi_pbc.h>
-#include <defs/bfa_defs_ioc.h>
-#include <defs/bfa_defs_iocfc.h>
-#include <defs/bfa_defs_boot.h>
-
-#pragma pack(1)
-
-enum bfi_iocfc_h2i_msgs {
- BFI_IOCFC_H2I_CFG_REQ = 1,
- BFI_IOCFC_H2I_GET_STATS_REQ = 2,
- BFI_IOCFC_H2I_CLEAR_STATS_REQ = 3,
- BFI_IOCFC_H2I_SET_INTR_REQ = 4,
- BFI_IOCFC_H2I_UPDATEQ_REQ = 5,
-};
-
-enum bfi_iocfc_i2h_msgs {
- BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1),
- BFI_IOCFC_I2H_GET_STATS_RSP = BFA_I2HM(2),
- BFI_IOCFC_I2H_CLEAR_STATS_RSP = BFA_I2HM(3),
- BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(5),
-};
-
-struct bfi_iocfc_cfg_s {
- u8 num_cqs; /* Number of CQs to be used */
- u8 sense_buf_len; /* SCSI sense length */
- u8 trunk_enabled; /* port trunking enabled */
- u8 trunk_ports; /* trunk ports bit map */
- u32 endian_sig; /* endian signature of host */
-
- /**
- * Request and response circular queue base addresses, size and
- * shadow index pointers.
- */
- union bfi_addr_u req_cq_ba[BFI_IOC_MAX_CQS];
- union bfi_addr_u req_shadow_ci[BFI_IOC_MAX_CQS];
- u16 req_cq_elems[BFI_IOC_MAX_CQS];
- union bfi_addr_u rsp_cq_ba[BFI_IOC_MAX_CQS];
- union bfi_addr_u rsp_shadow_pi[BFI_IOC_MAX_CQS];
- u16 rsp_cq_elems[BFI_IOC_MAX_CQS];
-
- union bfi_addr_u stats_addr; /* DMA-able address for stats */
- union bfi_addr_u cfgrsp_addr; /* config response dma address */
- union bfi_addr_u ioim_snsbase; /* IO sense buffer base address */
- struct bfa_iocfc_intr_attr_s intr_attr; /* IOC interrupt attributes */
-};
-
-/**
- * Boot target wwn information for this port. This contains either the stored
- * or discovered boot target port wwns for the port.
- */
-struct bfi_iocfc_bootwwns {
- wwn_t wwn[BFA_BOOT_BOOTLUN_MAX];
- u8 nwwns;
- u8 rsvd[7];
-};
-
-struct bfi_iocfc_cfgrsp_s {
- struct bfa_iocfc_fwcfg_s fwcfg;
- struct bfa_iocfc_intr_attr_s intr_attr;
- struct bfi_iocfc_bootwwns bootwwns;
- struct bfi_pbc_s pbc_cfg;
-};
-
-/**
- * BFI_IOCFC_H2I_CFG_REQ message
- */
-struct bfi_iocfc_cfg_req_s {
- struct bfi_mhdr_s mh;
- union bfi_addr_u ioc_cfg_dma_addr;
-};
-
-/**
- * BFI_IOCFC_I2H_CFG_REPLY message
- */
-struct bfi_iocfc_cfg_reply_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u8 cfg_success; /* cfg reply status */
- u8 lpu_bm; /* LPUs assigned for this IOC */
- u8 rsvd[2];
-};
-
-/**
- * BFI_IOCFC_H2I_GET_STATS_REQ & BFI_IOCFC_H2I_CLEAR_STATS_REQ messages
- */
-struct bfi_iocfc_stats_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_IOCFC_I2H_GET_STATS_RSP & BFI_IOCFC_I2H_CLEAR_STATS_RSP messages
- */
-struct bfi_iocfc_stats_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* reply status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_IOCFC_H2I_SET_INTR_REQ message
- */
-struct bfi_iocfc_set_intr_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 coalesce; /* enable intr coalescing*/
- u8 rsvd[3];
- u16 delay; /* delay timer 0..1125us */
- u16 latency; /* latency timer 0..225us */
-};
-
-/**
- * BFI_IOCFC_H2I_UPDATEQ_REQ message
- */
-struct bfi_iocfc_updateq_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u32 reqq_ba; /* reqq base addr */
- u32 rspq_ba; /* rspq base addr */
- u32 reqq_sci; /* reqq shadow ci */
- u32 rspq_spi; /* rspq shadow pi */
-};
-
-/**
- * BFI_IOCFC_I2H_UPDATEQ_RSP message
- */
-struct bfi_iocfc_updateq_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* updateq status */
- u8 rsvd[3];
-};
-
-/**
- * H2I Messages
- */
-union bfi_iocfc_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_iocfc_cfg_req_s cfg_req;
- struct bfi_iocfc_stats_req_s stats_get;
- struct bfi_iocfc_stats_req_s stats_clr;
- struct bfi_iocfc_updateq_req_s updateq_req;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-/**
- * I2H Messages
- */
-union bfi_iocfc_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_iocfc_cfg_reply_s cfg_reply;
- struct bfi_iocfc_stats_rsp_s stats_get_rsp;
- struct bfi_iocfc_stats_rsp_s stats_clr_rsp;
- struct bfi_iocfc_updateq_rsp_s updateq_rsp;
- u32 mboxmsg[BFI_IOC_MSGSZ];
-};
-
-#pragma pack()
-
-#endif /* __BFI_IOCFC_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lport.h b/drivers/scsi/bfa/include/bfi/bfi_lport.h
deleted file mode 100644
index 2901061..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_lport.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_LPORT_H__
-#define __BFI_LPORT_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_lport_h2i_msgs {
- BFI_LPORT_H2I_CREATE_REQ = 1,
- BFI_LPORT_H2I_DELETE_REQ = 2,
-};
-
-enum bfi_lport_i2h_msgs {
- BFI_LPORT_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_LPORT_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_LPORT_I2H_ONLINE = BFA_I2HM(3),
- BFI_LPORT_I2H_OFFLINE = BFA_I2HM(4),
-};
-
-#define BFI_LPORT_MAX_SYNNAME 64
-
-enum bfi_lport_role_e {
- BFI_LPORT_ROLE_FCPIM = 1,
- BFI_LPORT_ROLE_FCPTM = 2,
- BFI_LPORT_ROLE_IPFC = 4,
-};
-
-struct bfi_lport_create_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fabric_fwhdl; /* parent fabric instance */
- u8 roles; /* lport FC-4 roles */
- u8 rsvd;
- wwn_t pwwn; /* port name */
- wwn_t nwwn; /* node name */
- u8 symname[BFI_LPORT_MAX_SYNNAME];
-};
-
-struct bfi_lport_create_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u8 status; /* lport creation status */
- u8 rsvd[3];
-};
-
-struct bfi_lport_delete_req_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 fw_handle; /* firmware lport handle */
- u16 rsvd;
-};
-
-struct bfi_lport_delete_rsp_s {
- bfi_mhdr_t mh; /* common msg header */
- u16 bfa_handle; /* host lport handle */
- u8 status; /* lport deletion status */
- u8 rsvd;
-};
-
-union bfi_lport_h2i_msg_u {
- bfi_msg_t *msg;
- struct bfi_lport_create_req_s *create_req;
- struct bfi_lport_delete_req_s *delete_req;
-};
-
-union bfi_lport_i2h_msg_u {
- bfi_msg_t *msg;
- struct bfi_lport_create_rsp_s *create_rsp;
- struct bfi_lport_delete_rsp_s *delete_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_LPORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lps.h b/drivers/scsi/bfa/include/bfi/bfi_lps.h
deleted file mode 100644
index 7ed31bb..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_lps.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_LPS_H__
-#define __BFI_LPS_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_lps_h2i_msgs {
- BFI_LPS_H2I_LOGIN_REQ = 1,
- BFI_LPS_H2I_LOGOUT_REQ = 2,
-};
-
-enum bfi_lps_i2h_msgs {
- BFI_LPS_H2I_LOGIN_RSP = BFA_I2HM(1),
- BFI_LPS_H2I_LOGOUT_RSP = BFA_I2HM(2),
- BFI_LPS_H2I_CVL_EVENT = BFA_I2HM(3),
-};
-
-struct bfi_lps_login_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 alpa;
- u16 pdu_size;
- wwn_t pwwn;
- wwn_t nwwn;
- u8 fdisc;
- u8 auth_en;
- u8 rsvd[2];
-};
-
-struct bfi_lps_login_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 status;
- u8 lsrjt_rsn;
- u8 lsrjt_expl;
- wwn_t port_name;
- wwn_t node_name;
- u16 bb_credit;
- u8 f_port;
- u8 npiv_en;
- u32 lp_pid:24;
- u32 auth_req:8;
- mac_t lp_mac;
- mac_t fcf_mac;
- u8 ext_status;
- u8 brcd_switch;/* attached peer is brcd switch */
-};
-
-struct bfi_lps_logout_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 rsvd[3];
- wwn_t port_name;
-};
-
-struct bfi_lps_logout_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 status;
- u8 rsvd[2];
-};
-
-struct bfi_lps_cvl_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 lp_tag;
- u8 rsvd[3];
-};
-
-union bfi_lps_h2i_msg_u {
- struct bfi_mhdr_s *msg;
- struct bfi_lps_login_req_s *login_req;
- struct bfi_lps_logout_req_s *logout_req;
-};
-
-union bfi_lps_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_lps_login_rsp_s *login_rsp;
- struct bfi_lps_logout_rsp_s *logout_rsp;
- struct bfi_lps_cvl_event_s *cvl_event;
-};
-
-#pragma pack()
-
-#endif /* __BFI_LPS_H__ */
-
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pbc.h b/drivers/scsi/bfa/include/bfi/bfi_pbc.h
deleted file mode 100644
index 88a4154..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_pbc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_PBC_H__
-#define __BFI_PBC_H__
-
-#pragma pack(1)
-
-#define BFI_PBC_MAX_BLUNS 8
-#define BFI_PBC_MAX_VPORTS 16
-
-#define BFI_PBC_PORT_DISABLED 2
-/**
- * PBC boot lun configuration
- */
-struct bfi_pbc_blun_s {
- wwn_t tgt_pwwn;
- lun_t tgt_lun;
-};
-
-/**
- * PBC virtual port configuration
- */
-struct bfi_pbc_vport_s {
- wwn_t vp_pwwn;
- wwn_t vp_nwwn;
-};
-
-/**
- * BFI pre-boot configuration information
- */
-struct bfi_pbc_s {
- u8 port_enabled;
- u8 boot_enabled;
- u8 nbluns;
- u8 nvports;
- u8 port_speed;
- u8 rsvd_a;
- u16 hss;
- wwn_t pbc_pwwn;
- wwn_t pbc_nwwn;
- struct bfi_pbc_blun_s blun[BFI_PBC_MAX_BLUNS];
- struct bfi_pbc_vport_s vport[BFI_PBC_MAX_VPORTS];
-};
-
-#pragma pack()
-
-#endif /* __BFI_PBC_H__ */
diff --git a/drivers/scsi/bfa/include/bfi/bfi_port.h b/drivers/scsi/bfa/include/bfi/bfi_port.h
deleted file mode 100644
index 3ec3bea..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_port.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFI_PORT_H__
-#define __BFI_PORT_H__
-
-#include <bfi/bfi.h>
-#include <defs/bfa_defs_pport.h>
-
-#pragma pack(1)
-
-enum bfi_port_h2i {
- BFI_PORT_H2I_ENABLE_REQ = (1),
- BFI_PORT_H2I_DISABLE_REQ = (2),
- BFI_PORT_H2I_GET_STATS_REQ = (3),
- BFI_PORT_H2I_CLEAR_STATS_REQ = (4),
-};
-
-enum bfi_port_i2h {
- BFI_PORT_I2H_ENABLE_RSP = BFA_I2HM(1),
- BFI_PORT_I2H_DISABLE_RSP = BFA_I2HM(2),
- BFI_PORT_I2H_GET_STATS_RSP = BFA_I2HM(3),
- BFI_PORT_I2H_CLEAR_STATS_RSP = BFA_I2HM(4),
-};
-
-/**
- * Generic REQ type
- */
-struct bfi_port_generic_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
- u32 rsvd;
-};
-
-/**
- * Generic RSP type
- */
-struct bfi_port_generic_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* port enable status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * @todo
- * BFI_PORT_H2I_ENABLE_REQ
- */
-
-/**
- * @todo
- * BFI_PORT_I2H_ENABLE_RSP
- */
-
-/**
- * BFI_PORT_H2I_DISABLE_REQ
- */
-
-/**
- * BFI_PORT_I2H_DISABLE_RSP
- */
-
-/**
- * BFI_PORT_H2I_GET_STATS_REQ
- */
-struct bfi_port_get_stats_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- union bfi_addr_u dma_addr;
-};
-
-/**
- * BFI_PORT_I2H_GET_STATS_RSP
- */
-
-/**
- * BFI_PORT_H2I_CLEAR_STATS_REQ
- */
-
-/**
- * BFI_PORT_I2H_CLEAR_STATS_RSP
- */
-
-union bfi_port_h2i_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_port_generic_req_s enable_req;
- struct bfi_port_generic_req_s disable_req;
- struct bfi_port_get_stats_req_s getstats_req;
- struct bfi_port_generic_req_s clearstats_req;
-};
-
-union bfi_port_i2h_msg_u {
- struct bfi_mhdr_s mh;
- struct bfi_port_generic_rsp_s enable_rsp;
- struct bfi_port_generic_rsp_s disable_rsp;
- struct bfi_port_generic_rsp_s getstats_rsp;
- struct bfi_port_generic_rsp_s clearstats_rsp;
-};
-
-#pragma pack()
-
-#endif /* __BFI_PORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_pport.h b/drivers/scsi/bfa/include/bfi/bfi_pport.h
deleted file mode 100644
index 50dcf45..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_pport.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFI_PPORT_H__
-#define __BFI_PPORT_H__
-
-#include <bfi/bfi.h>
-#include <defs/bfa_defs_pport.h>
-
-#pragma pack(1)
-
-enum bfi_fcport_h2i {
- BFI_FCPORT_H2I_ENABLE_REQ = (1),
- BFI_FCPORT_H2I_DISABLE_REQ = (2),
- BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ = (3),
- BFI_FCPORT_H2I_STATS_GET_REQ = (4),
- BFI_FCPORT_H2I_STATS_CLEAR_REQ = (5),
-};
-
-enum bfi_fcport_i2h {
- BFI_FCPORT_I2H_ENABLE_RSP = BFA_I2HM(1),
- BFI_FCPORT_I2H_DISABLE_RSP = BFA_I2HM(2),
- BFI_FCPORT_I2H_SET_SVC_PARAMS_RSP = BFA_I2HM(3),
- BFI_FCPORT_I2H_STATS_GET_RSP = BFA_I2HM(4),
- BFI_FCPORT_I2H_STATS_CLEAR_RSP = BFA_I2HM(5),
- BFI_FCPORT_I2H_EVENT = BFA_I2HM(6),
-};
-
-/**
- * Generic REQ type
- */
-struct bfi_fcport_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * Generic RSP type
- */
-struct bfi_fcport_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* port enable status */
- u8 rsvd[3];
- u32 msgtag; /* msgtag for reply */
-};
-
-/**
- * BFI_FCPORT_H2I_ENABLE_REQ
- */
-struct bfi_fcport_enable_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u32 rsvd1;
- wwn_t nwwn; /* node wwn of physical port */
- wwn_t pwwn; /* port wwn of physical port */
- struct bfa_pport_cfg_s port_cfg; /* port configuration */
- union bfi_addr_u stats_dma_addr; /* DMA address for stats */
- u32 msgtag; /* msgtag for reply */
- u32 rsvd2;
-};
-
-/**
- * BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ
- */
-struct bfi_fcport_set_svc_params_req_s {
- struct bfi_mhdr_s mh; /* msg header */
- u16 tx_bbcredit; /* Tx credits */
- u16 rsvd;
-};
-
-/**
- * BFI_FCPORT_I2H_EVENT
- */
-struct bfi_fcport_event_s {
- struct bfi_mhdr_s mh; /* common msg header */
- struct bfa_pport_link_s link_state;
-};
-
-/**
- * fcport H2I message
- */
-union bfi_fcport_h2i_msg_u {
- struct bfi_mhdr_s *mhdr;
- struct bfi_fcport_enable_req_s *penable;
- struct bfi_fcport_req_s *pdisable;
- struct bfi_fcport_set_svc_params_req_s *psetsvcparams;
- struct bfi_fcport_req_s *pstatsget;
- struct bfi_fcport_req_s *pstatsclear;
-};
-
-/**
- * fcport I2H message
- */
-union bfi_fcport_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_fcport_rsp_s *penable_rsp;
- struct bfi_fcport_rsp_s *pdisable_rsp;
- struct bfi_fcport_rsp_s *psetsvcparams_rsp;
- struct bfi_fcport_rsp_s *pstatsget_rsp;
- struct bfi_fcport_rsp_s *pstatsclear_rsp;
- struct bfi_fcport_event_s *event;
-};
-
-#pragma pack()
-
-#endif /* __BFI_PPORT_H__ */
diff --git a/drivers/scsi/bfa/include/bfi/bfi_rport.h b/drivers/scsi/bfa/include/bfi/bfi_rport.h
deleted file mode 100644
index e1cd83b..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_rport.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_RPORT_H__
-#define __BFI_RPORT_H__
-
-#include <bfi/bfi.h>
-
-#pragma pack(1)
-
-enum bfi_rport_h2i_msgs {
- BFI_RPORT_H2I_CREATE_REQ = 1,
- BFI_RPORT_H2I_DELETE_REQ = 2,
- BFI_RPORT_H2I_SET_SPEED_REQ = 3,
-};
-
-enum bfi_rport_i2h_msgs {
- BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
- BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
- BFI_RPORT_I2H_QOS_SCN = BFA_I2HM(3),
-};
-
-struct bfi_rport_create_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u16 max_frmsz; /* max rcv pdu size */
- u32 pid:24, /* remote port ID */
- lp_tag:8; /* local port tag */
- u32 local_pid:24, /* local port ID */
- cisc:8;
- u8 fc_class; /* supported FC classes */
- u8 vf_en; /* virtual fabric enable */
- u16 vf_id; /* virtual fabric ID */
-};
-
-struct bfi_rport_create_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u8 status; /* rport creation status */
- u8 rsvd[3];
- u16 bfa_handle; /* host rport handle */
- u16 fw_handle; /* firmware rport handle */
- struct bfa_rport_qos_attr_s qos_attr; /* QoS Attributes */
-};
-
-struct bfa_rport_speed_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* firmware rport handle */
- u8 speed; /*! rport's speed via RPSC */
- u8 rsvd;
-};
-
-struct bfi_rport_delete_req_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 fw_handle; /* firmware rport handle */
- u16 rsvd;
-};
-
-struct bfi_rport_delete_rsp_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u8 status; /* rport deletion status */
- u8 rsvd;
-};
-
-struct bfi_rport_qos_scn_s {
- struct bfi_mhdr_s mh; /* common msg header */
- u16 bfa_handle; /* host rport handle */
- u16 rsvd;
- struct bfa_rport_qos_attr_s old_qos_attr; /* Old QoS Attributes */
- struct bfa_rport_qos_attr_s new_qos_attr; /* New QoS Attributes */
-};
-
-union bfi_rport_h2i_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_rport_create_req_s *create_req;
- struct bfi_rport_delete_req_s *delete_req;
- struct bfi_rport_speed_req_s *speed_req;
-};
-
-union bfi_rport_i2h_msg_u {
- struct bfi_msg_s *msg;
- struct bfi_rport_create_rsp_s *create_rsp;
- struct bfi_rport_delete_rsp_s *delete_rsp;
- struct bfi_rport_qos_scn_s *qos_scn_evt;
-};
-
-#pragma pack()
-
-#endif /* __BFI_RPORT_H__ */
-
diff --git a/drivers/scsi/bfa/include/bfi/bfi_uf.h b/drivers/scsi/bfa/include/bfi/bfi_uf.h
deleted file mode 100644
index f328a9e..0000000
--- a/drivers/scsi/bfa/include/bfi/bfi_uf.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFI_UF_H__
-#define __BFI_UF_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-enum bfi_uf_h2i {
- BFI_UF_H2I_BUF_POST = 1,
-};
-
-enum bfi_uf_i2h {
- BFI_UF_I2H_FRM_RCVD = BFA_I2HM(1),
-};
-
-#define BFA_UF_MAX_SGES 2
-
-struct bfi_uf_buf_post_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 buf_tag; /* buffer tag */
- u16 buf_len; /* total buffer length */
- struct bfi_sge_s sge[BFA_UF_MAX_SGES]; /* buffer DMA SGEs */
-};
-
-struct bfi_uf_frm_rcvd_s {
- struct bfi_mhdr_s mh; /* Common msg header */
- u16 buf_tag; /* buffer tag */
- u16 rsvd;
- u16 frm_len; /* received frame length */
- u16 xfr_len; /* tranferred length */
-};
-
-#pragma pack()
-
-#endif /* __BFI_UF_H__ */
diff --git a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h b/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
deleted file mode 100644
index a75a1f3..0000000
--- a/drivers/scsi/bfa/include/cna/bfa_cna_trcmod.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_cna_trcmod.h CNA trace modules
- */
-
-#ifndef __BFA_CNA_TRCMOD_H__
-#define __BFA_CNA_TRCMOD_H__
-
-#include <cs/bfa_trc.h>
-
-/*
- * !!! Only append to the enums defined here to avoid any versioning
- * !!! needed between trace utility and driver version
- */
-enum {
- BFA_TRC_CNA_CEE = 1,
- BFA_TRC_CNA_PORT = 2,
- BFA_TRC_CNA_IOC = 3,
- BFA_TRC_CNA_DIAG = 4,
- BFA_TRC_CNA_IOC_CB = 5,
- BFA_TRC_CNA_IOC_CT = 6,
-};
-
-#endif /* __BFA_CNA_TRCMOD_H__ */
diff --git a/drivers/scsi/bfa/include/cna/cee/bfa_cee.h b/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
deleted file mode 100644
index 77f297f..0000000
--- a/drivers/scsi/bfa/include/cna/cee/bfa_cee.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_CEE_H__
-#define __BFA_CEE_H__
-
-#include <defs/bfa_defs_cee.h>
-#include <bfa_ioc.h>
-#include <cs/bfa_trc.h>
-#include <cs/bfa_log.h>
-
-typedef void (*bfa_cee_get_attr_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_get_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_reset_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_cee_hbfail_cbfn_t) (void *dev, bfa_status_t status);
-
-struct bfa_cee_cbfn_s {
- bfa_cee_get_attr_cbfn_t get_attr_cbfn;
- void *get_attr_cbarg;
- bfa_cee_get_stats_cbfn_t get_stats_cbfn;
- void *get_stats_cbarg;
- bfa_cee_reset_stats_cbfn_t reset_stats_cbfn;
- void *reset_stats_cbarg;
-};
-
-struct bfa_cee_s {
- void *dev;
- bfa_boolean_t get_attr_pending;
- bfa_boolean_t get_stats_pending;
- bfa_boolean_t reset_stats_pending;
- bfa_status_t get_attr_status;
- bfa_status_t get_stats_status;
- bfa_status_t reset_stats_status;
- struct bfa_cee_cbfn_s cbfn;
- struct bfa_ioc_hbfail_notify_s hbfail;
- struct bfa_trc_mod_s *trcmod;
- struct bfa_log_mod_s *logmod;
- struct bfa_cee_attr_s *attr;
- struct bfa_cee_stats_s *stats;
- struct bfa_dma_s attr_dma;
- struct bfa_dma_s stats_dma;
- struct bfa_ioc_s *ioc;
- struct bfa_mbox_cmd_s get_cfg_mb;
- struct bfa_mbox_cmd_s get_stats_mb;
- struct bfa_mbox_cmd_s reset_stats_mb;
-};
-
-u32 bfa_cee_meminfo(void);
-void bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva,
- u64 dma_pa);
-void bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
- struct bfa_trc_mod_s *trcmod,
- struct bfa_log_mod_s *logmod);
-void bfa_cee_detach(struct bfa_cee_s *cee);
-bfa_status_t bfa_cee_get_attr(struct bfa_cee_s *cee,
- struct bfa_cee_attr_s *attr,
- bfa_cee_get_attr_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_cee_get_stats(struct bfa_cee_s *cee,
- struct bfa_cee_stats_s *stats,
- bfa_cee_get_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_cee_reset_stats(struct bfa_cee_s *cee,
- bfa_cee_reset_stats_cbfn_t cbfn, void *cbarg);
-#endif /* __BFA_CEE_H__ */
diff --git a/drivers/scsi/bfa/include/cna/port/bfa_port.h b/drivers/scsi/bfa/include/cna/port/bfa_port.h
deleted file mode 100644
index d7babaf..0000000
--- a/drivers/scsi/bfa/include/cna/port/bfa_port.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_PORT_H__
-#define __BFA_PORT_H__
-
-#include <defs/bfa_defs_port.h>
-#include <bfa_ioc.h>
-#include <cs/bfa_trc.h>
-#include <cs/bfa_log.h>
-
-typedef void (*bfa_port_stats_cbfn_t) (void *dev, bfa_status_t status);
-typedef void (*bfa_port_endis_cbfn_t) (void *dev, bfa_status_t status);
-
-struct bfa_port_s {
- void *dev;
- struct bfa_ioc_s *ioc;
- struct bfa_trc_mod_s *trcmod;
- struct bfa_log_mod_s *logmod;
- u32 msgtag;
- bfa_boolean_t stats_busy;
- struct bfa_mbox_cmd_s stats_mb;
- bfa_port_stats_cbfn_t stats_cbfn;
- void *stats_cbarg;
- bfa_status_t stats_status;
- u32 stats_reset_time;
- union bfa_pport_stats_u *stats;
- struct bfa_dma_s stats_dma;
- bfa_boolean_t endis_pending;
- struct bfa_mbox_cmd_s endis_mb;
- bfa_port_endis_cbfn_t endis_cbfn;
- void *endis_cbarg;
- bfa_status_t endis_status;
- struct bfa_ioc_hbfail_notify_s hbfail;
-};
-
-void bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
- void *dev, struct bfa_trc_mod_s *trcmod,
- struct bfa_log_mod_s *logmod);
-void bfa_port_detach(struct bfa_port_s *port);
-void bfa_port_hbfail(void *arg);
-
-bfa_status_t bfa_port_get_stats(struct bfa_port_s *port,
- union bfa_pport_stats_u *stats,
- bfa_port_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_clear_stats(struct bfa_port_s *port,
- bfa_port_stats_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_enable(struct bfa_port_s *port,
- bfa_port_endis_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_port_disable(struct bfa_port_s *port,
- bfa_port_endis_cbfn_t cbfn, void *cbarg);
-u32 bfa_port_meminfo(void);
-void bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva,
- u64 dma_pa);
-
-#endif /* __BFA_PORT_H__ */
diff --git a/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h b/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
deleted file mode 100644
index 1563ee5..0000000
--- a/drivers/scsi/bfa/include/cna/pstats/ethport_defs.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __ETHPORT_DEFS_H__
-#define __ETHPORT_DEFS_H__
-
-struct bnad_drv_stats {
- u64 netif_queue_stop;
- u64 netif_queue_wakeup;
- u64 tso4;
- u64 tso6;
- u64 tso_err;
- u64 tcpcsum_offload;
- u64 udpcsum_offload;
- u64 csum_help;
- u64 csum_help_err;
-
- u64 hw_stats_updates;
- u64 netif_rx_schedule;
- u64 netif_rx_complete;
- u64 netif_rx_dropped;
-};
-#endif
diff --git a/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h b/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
deleted file mode 100644
index eb75480..0000000
--- a/drivers/scsi/bfa/include/cna/pstats/phyport_defs.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved.
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __PHYPORT_DEFS_H__
-#define __PHYPORT_DEFS_H__
-
-#define BNA_TXF_ID_MAX 64
-#define BNA_RXF_ID_MAX 64
-
-/*
- * Statistics
- */
-
-/*
- * TxF Frame Statistics
- */
-struct bna_stats_txf {
- u64 ucast_octets;
- u64 ucast;
- u64 ucast_vlan;
-
- u64 mcast_octets;
- u64 mcast;
- u64 mcast_vlan;
-
- u64 bcast_octets;
- u64 bcast;
- u64 bcast_vlan;
-
- u64 errors;
- u64 filter_vlan; /* frames filtered due to VLAN */
- u64 filter_mac_sa; /* frames filtered due to SA check */
-};
-
-/*
- * RxF Frame Statistics
- */
-struct bna_stats_rxf {
- u64 ucast_octets;
- u64 ucast;
- u64 ucast_vlan;
-
- u64 mcast_octets;
- u64 mcast;
- u64 mcast_vlan;
-
- u64 bcast_octets;
- u64 bcast;
- u64 bcast_vlan;
- u64 frame_drops;
-};
-
-/*
- * FC Tx Frame Statistics
- */
-struct bna_stats_fc_tx {
- u64 txf_ucast_octets;
- u64 txf_ucast;
- u64 txf_ucast_vlan;
-
- u64 txf_mcast_octets;
- u64 txf_mcast;
- u64 txf_mcast_vlan;
-
- u64 txf_bcast_octets;
- u64 txf_bcast;
- u64 txf_bcast_vlan;
-
- u64 txf_parity_errors;
- u64 txf_timeout;
- u64 txf_fid_parity_errors;
-};
-
-/*
- * FC Rx Frame Statistics
- */
-struct bna_stats_fc_rx {
- u64 rxf_ucast_octets;
- u64 rxf_ucast;
- u64 rxf_ucast_vlan;
-
- u64 rxf_mcast_octets;
- u64 rxf_mcast;
- u64 rxf_mcast_vlan;
-
- u64 rxf_bcast_octets;
- u64 rxf_bcast;
- u64 rxf_bcast_vlan;
-};
-
-/*
- * RAD Frame Statistics
- */
-struct cna_stats_rad {
- u64 rx_frames;
- u64 rx_octets;
- u64 rx_vlan_frames;
-
- u64 rx_ucast;
- u64 rx_ucast_octets;
- u64 rx_ucast_vlan;
-
- u64 rx_mcast;
- u64 rx_mcast_octets;
- u64 rx_mcast_vlan;
-
- u64 rx_bcast;
- u64 rx_bcast_octets;
- u64 rx_bcast_vlan;
-
- u64 rx_drops;
-};
-
-/*
- * BPC Tx Registers
- */
-struct cna_stats_bpc_tx {
- u64 tx_pause[8];
- u64 tx_zero_pause[8]; /* Pause cancellation */
- u64 tx_first_pause[8]; /* Pause initiation rather
- *than retention */
-};
-
-/*
- * BPC Rx Registers
- */
-struct cna_stats_bpc_rx {
- u64 rx_pause[8];
- u64 rx_zero_pause[8]; /* Pause cancellation */
- u64 rx_first_pause[8]; /* Pause initiation rather
- *than retention */
-};
-
-/*
- * MAC Rx Statistics
- */
-struct cna_stats_mac_rx {
- u64 frame_64; /* both rx and tx counter */
- u64 frame_65_127; /* both rx and tx counter */
- u64 frame_128_255; /* both rx and tx counter */
- u64 frame_256_511; /* both rx and tx counter */
- u64 frame_512_1023; /* both rx and tx counter */
- u64 frame_1024_1518; /* both rx and tx counter */
- u64 frame_1518_1522; /* both rx and tx counter */
- u64 rx_bytes;
- u64 rx_packets;
- u64 rx_fcs_error;
- u64 rx_multicast;
- u64 rx_broadcast;
- u64 rx_control_frames;
- u64 rx_pause;
- u64 rx_unknown_opcode;
- u64 rx_alignment_error;
- u64 rx_frame_length_error;
- u64 rx_code_error;
- u64 rx_carrier_sense_error;
- u64 rx_undersize;
- u64 rx_oversize;
- u64 rx_fragments;
- u64 rx_jabber;
- u64 rx_drop;
-};
-
-/*
- * MAC Tx Statistics
- */
-struct cna_stats_mac_tx {
- u64 tx_bytes;
- u64 tx_packets;
- u64 tx_multicast;
- u64 tx_broadcast;
- u64 tx_pause;
- u64 tx_deferral;
- u64 tx_excessive_deferral;
- u64 tx_single_collision;
- u64 tx_muliple_collision;
- u64 tx_late_collision;
- u64 tx_excessive_collision;
- u64 tx_total_collision;
- u64 tx_pause_honored;
- u64 tx_drop;
- u64 tx_jabber;
- u64 tx_fcs_error;
- u64 tx_control_frame;
- u64 tx_oversize;
- u64 tx_undersize;
- u64 tx_fragments;
-};
-
-/*
- * Complete statistics
- */
-struct bna_stats {
- struct cna_stats_mac_rx mac_rx_stats;
- struct cna_stats_bpc_rx bpc_rx_stats;
- struct cna_stats_rad rad_stats;
- struct bna_stats_fc_rx fc_rx_stats;
- struct cna_stats_mac_tx mac_tx_stats;
- struct cna_stats_bpc_tx bpc_tx_stats;
- struct bna_stats_fc_tx fc_tx_stats;
- struct bna_stats_rxf rxf_stats[BNA_TXF_ID_MAX];
- struct bna_stats_txf txf_stats[BNA_RXF_ID_MAX];
-};
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_checksum.h b/drivers/scsi/bfa/include/cs/bfa_checksum.h
deleted file mode 100644
index 650f8d0..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_checksum.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_checksum.h BFA checksum utilities
- */
-
-#ifndef __BFA_CHECKSUM_H__
-#define __BFA_CHECKSUM_H__
-
-static inline u32
-bfa_checksum_u32(u32 *buf, int sz)
-{
- int i, m = sz >> 2;
- u32 sum = 0;
-
- for (i = 0; i < m; i++)
- sum ^= buf[i];
-
- return sum;
-}
-
-static inline u16
-bfa_checksum_u16(u16 *buf, int sz)
-{
- int i, m = sz >> 1;
- u16 sum = 0;
-
- for (i = 0; i < m; i++)
- sum ^= buf[i];
-
- return sum;
-}
-
-static inline u8
-bfa_checksum_u8(u8 *buf, int sz)
-{
- int i;
- u8 sum = 0;
-
- for (i = 0; i < sz; i++)
- sum ^= buf[i];
-
- return sum;
-}
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_debug.h b/drivers/scsi/bfa/include/cs/bfa_debug.h
deleted file mode 100644
index 75a911e..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_debug.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_debug.h BFA debug interfaces
- */
-
-#ifndef __BFA_DEBUG_H__
-#define __BFA_DEBUG_H__
-
-#define bfa_assert(__cond) do { \
- if (!(__cond)) \
- bfa_panic(__LINE__, __FILE__, #__cond); \
-} while (0)
-
-#define bfa_sm_fault(__mod, __event) do { \
- bfa_trc(__mod, (((uint32_t)0xDEAD << 16) | __event)); \
- bfa_sm_panic((__mod)->logm, __LINE__, __FILE__, __event); \
-} while (0)
-
-#ifndef BFA_PERF_BUILD
-#define bfa_assert_fp(__cond) bfa_assert(__cond)
-#else
-#define bfa_assert_fp(__cond)
-#endif
-
-struct bfa_log_mod_s;
-void bfa_panic(int line, char *file, char *panicstr);
-void bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event);
-
-#endif /* __BFA_DEBUG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_log.h b/drivers/scsi/bfa/include/cs/bfa_log.h
deleted file mode 100644
index bc334e0..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_log.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_log.h BFA log library data structure and function definition
- */
-
-#ifndef __BFA_LOG_H__
-#define __BFA_LOG_H__
-
-#include <bfa_os_inc.h>
-#include <defs/bfa_defs_status.h>
-#include <defs/bfa_defs_aen.h>
-
-/*
- * BFA log module definition
- *
- * To create a new module id:
- * Add a #define at the end of the list below. Select a value for your
- * definition so that it is one (1) greater than the previous
- * definition. Modify the definition of BFA_LOG_MODULE_ID_MAX to become
- * your new definition.
- * Should have no gaps in between the values because this is used in arrays.
- * IMPORTANT: AEN_IDs must be at the begining, otherwise update bfa_defs_aen.h
- */
-
-enum bfa_log_module_id {
- BFA_LOG_UNUSED_ID = 0,
-
- /* AEN defs begin */
- BFA_LOG_AEN_MIN = BFA_LOG_UNUSED_ID,
-
- BFA_LOG_AEN_ID_ADAPTER = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ADAPTER,/* 1 */
- BFA_LOG_AEN_ID_PORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_PORT, /* 2 */
- BFA_LOG_AEN_ID_LPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_LPORT, /* 3 */
- BFA_LOG_AEN_ID_RPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_RPORT, /* 4 */
- BFA_LOG_AEN_ID_ITNIM = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNIM, /* 5 */
- BFA_LOG_AEN_ID_TIN = BFA_LOG_AEN_MIN + BFA_AEN_CAT_TIN, /* 6 */
- BFA_LOG_AEN_ID_IPFC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IPFC, /* 7 */
- BFA_LOG_AEN_ID_AUDIT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_AUDIT, /* 8 */
- BFA_LOG_AEN_ID_IOC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IOC, /* 9 */
- BFA_LOG_AEN_ID_ETHPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ETHPORT,/* 10 */
-
- BFA_LOG_AEN_MAX = BFA_LOG_AEN_ID_ETHPORT,
- /* AEN defs end */
-
- BFA_LOG_MODULE_ID_MIN = BFA_LOG_AEN_MAX,
-
- BFA_LOG_FW_ID = BFA_LOG_MODULE_ID_MIN + 1,
- BFA_LOG_HAL_ID = BFA_LOG_MODULE_ID_MIN + 2,
- BFA_LOG_FCS_ID = BFA_LOG_MODULE_ID_MIN + 3,
- BFA_LOG_WDRV_ID = BFA_LOG_MODULE_ID_MIN + 4,
- BFA_LOG_LINUX_ID = BFA_LOG_MODULE_ID_MIN + 5,
- BFA_LOG_SOLARIS_ID = BFA_LOG_MODULE_ID_MIN + 6,
-
- BFA_LOG_MODULE_ID_MAX = BFA_LOG_SOLARIS_ID,
-
- /* Not part of any arrays */
- BFA_LOG_MODULE_ID_ALL = BFA_LOG_MODULE_ID_MAX + 1,
- BFA_LOG_AEN_ALL = BFA_LOG_MODULE_ID_MAX + 2,
- BFA_LOG_DRV_ALL = BFA_LOG_MODULE_ID_MAX + 3,
-};
-
-/*
- * BFA log catalog name
- */
-#define BFA_LOG_CAT_NAME "BFA"
-
-/*
- * bfa log severity values
- */
-enum bfa_log_severity {
- BFA_LOG_INVALID = 0,
- BFA_LOG_CRITICAL = 1,
- BFA_LOG_ERROR = 2,
- BFA_LOG_WARNING = 3,
- BFA_LOG_INFO = 4,
- BFA_LOG_NONE = 5,
- BFA_LOG_LEVEL_MAX = BFA_LOG_NONE
-};
-
-#define BFA_LOG_MODID_OFFSET 16
-
-
-struct bfa_log_msgdef_s {
- u32 msg_id; /* message id */
- int attributes; /* attributes */
- int severity; /* severity level */
- char *msg_value;
- /* msg string */
- char *message;
- /* msg format string */
- int arg_type; /* argument type */
- int arg_num; /* number of argument */
-};
-
-/*
- * supported argument type
- */
-enum bfa_log_arg_type {
- BFA_LOG_S = 0, /* string */
- BFA_LOG_D, /* decimal */
- BFA_LOG_I, /* integer */
- BFA_LOG_O, /* oct number */
- BFA_LOG_U, /* unsigned integer */
- BFA_LOG_X, /* hex number */
- BFA_LOG_F, /* floating */
- BFA_LOG_C, /* character */
- BFA_LOG_L, /* double */
- BFA_LOG_P /* pointer */
-};
-
-#define BFA_LOG_ARG_TYPE 2
-#define BFA_LOG_ARG0 (0 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG1 (1 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG2 (2 * BFA_LOG_ARG_TYPE)
-#define BFA_LOG_ARG3 (3 * BFA_LOG_ARG_TYPE)
-
-#define BFA_LOG_GET_MOD_ID(msgid) ((msgid >> BFA_LOG_MODID_OFFSET) & 0xff)
-#define BFA_LOG_GET_MSG_IDX(msgid) (msgid & 0xffff)
-#define BFA_LOG_GET_MSG_ID(msgdef) ((msgdef)->msg_id)
-#define BFA_LOG_GET_MSG_FMT_STRING(msgdef) ((msgdef)->message)
-#define BFA_LOG_GET_SEVERITY(msgdef) ((msgdef)->severity)
-
-/*
- * Event attributes
- */
-#define BFA_LOG_ATTR_NONE 0
-#define BFA_LOG_ATTR_AUDIT 1
-#define BFA_LOG_ATTR_LOG 2
-#define BFA_LOG_ATTR_FFDC 4
-
-#define BFA_LOG_CREATE_ID(msw, lsw) \
- (((u32)msw << BFA_LOG_MODID_OFFSET) | lsw)
-
-struct bfa_log_mod_s;
-
-/**
- * callback function
- */
-typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
- const char *format, ...);
-
-
-struct bfa_log_mod_s {
- char instance_info[BFA_STRING_32]; /* instance info */
- int log_level[BFA_LOG_MODULE_ID_MAX + 1];
- /* log level for modules */
- bfa_log_cb_t cbfn; /* callback function */
-};
-
-extern int bfa_log_init(struct bfa_log_mod_s *log_mod,
- char *instance_name, bfa_log_cb_t cbfn);
-extern int bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...);
-extern bfa_status_t bfa_log_set_level(struct bfa_log_mod_s *log_mod,
- int mod_id, enum bfa_log_severity log_level);
-extern bfa_status_t bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
- enum bfa_log_severity log_level);
-extern bfa_status_t bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
- enum bfa_log_severity log_level);
-extern enum bfa_log_severity bfa_log_get_level(struct bfa_log_mod_s *log_mod,
- int mod_id);
-extern enum bfa_log_severity bfa_log_get_msg_level(
- struct bfa_log_mod_s *log_mod, u32 msg_id);
-/*
- * array of messages generated from xml files
- */
-extern struct bfa_log_msgdef_s bfa_log_msg_array[];
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_perf.h b/drivers/scsi/bfa/include/cs/bfa_perf.h
deleted file mode 100644
index 45aa5f9..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_perf.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFAD_PERF_H__
-#define __BFAD_PERF_H__
-
-#ifdef BFAD_PERF_BUILD
-
-#undef bfa_trc
-#undef bfa_trc32
-#undef bfa_assert
-#undef BFA_TRC_FILE
-
-#define bfa_trc(_trcp, _data)
-#define bfa_trc32(_trcp, _data)
-#define bfa_assert(__cond)
-#define BFA_TRC_FILE(__mod, __submod)
-
-#endif
-
-#endif /* __BFAD_PERF_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_plog.h b/drivers/scsi/bfa/include/cs/bfa_plog.h
deleted file mode 100644
index f5bef63..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_plog.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_PORTLOG_H__
-#define __BFA_PORTLOG_H__
-
-#include "protocol/fc.h"
-#include <defs/bfa_defs_types.h>
-
-#define BFA_PL_NLOG_ENTS 256
-#define BFA_PL_LOG_REC_INCR(_x) ((_x)++, (_x) %= BFA_PL_NLOG_ENTS)
-
-#define BFA_PL_STRING_LOG_SZ 32 /* number of chars in string log */
-#define BFA_PL_INT_LOG_SZ 8 /* number of integers in the integer log */
-
-enum bfa_plog_log_type {
- BFA_PL_LOG_TYPE_INVALID = 0,
- BFA_PL_LOG_TYPE_INT = 1,
- BFA_PL_LOG_TYPE_STRING = 2,
-};
-
-/*
- * the (fixed size) record format for each entry in the portlog
- */
-struct bfa_plog_rec_s {
- u32 tv; /* Filled by the portlog driver when the *
- * entry is added to the circular log. */
- u8 port; /* Source port that logged this entry. CM
- * entities will use 0xFF */
- u8 mid; /* Integer value to be used by all entities *
- * while logging. The module id to string *
- * conversion will be done by BFAL. See
- * enum bfa_plog_mid */
- u8 eid; /* indicates Rx, Tx, IOCTL, etc. See
- * enum bfa_plog_eid */
- u8 log_type; /* indicates string log or integer log.
- * see bfa_plog_log_type_t */
- u8 log_num_ints;
- /*
- * interpreted only if log_type is INT_LOG. indicates number of
- * integers in the int_log[] (0-PL_INT_LOG_SZ).
- */
- u8 rsvd;
- u16 misc; /* can be used to indicate fc frame length,
- *etc.. */
- union {
- char string_log[BFA_PL_STRING_LOG_SZ];
- u32 int_log[BFA_PL_INT_LOG_SZ];
- } log_entry;
-
-};
-
-/*
- * the following #defines will be used by the logging entities to indicate
- * their module id. BFAL will convert the integer value to string format
- *
-* process to be used while changing the following #defines:
- * - Always add new entries at the end
- * - define corresponding string in BFAL
- * - Do not remove any entry or rearrange the order.
- */
-enum bfa_plog_mid {
- BFA_PL_MID_INVALID = 0,
- BFA_PL_MID_DEBUG = 1,
- BFA_PL_MID_DRVR = 2,
- BFA_PL_MID_HAL = 3,
- BFA_PL_MID_HAL_FCXP = 4,
- BFA_PL_MID_HAL_UF = 5,
- BFA_PL_MID_FCS = 6,
- BFA_PL_MID_LPS = 7,
- BFA_PL_MID_MAX = 8
-};
-
-#define BFA_PL_MID_STRLEN 8
-struct bfa_plog_mid_strings_s {
- char m_str[BFA_PL_MID_STRLEN];
-};
-
-/*
- * the following #defines will be used by the logging entities to indicate
- * their event type. BFAL will convert the integer value to string format
- *
-* process to be used while changing the following #defines:
- * - Always add new entries at the end
- * - define corresponding string in BFAL
- * - Do not remove any entry or rearrange the order.
- */
-enum bfa_plog_eid {
- BFA_PL_EID_INVALID = 0,
- BFA_PL_EID_IOC_DISABLE = 1,
- BFA_PL_EID_IOC_ENABLE = 2,
- BFA_PL_EID_PORT_DISABLE = 3,
- BFA_PL_EID_PORT_ENABLE = 4,
- BFA_PL_EID_PORT_ST_CHANGE = 5,
- BFA_PL_EID_TX = 6,
- BFA_PL_EID_TX_ACK1 = 7,
- BFA_PL_EID_TX_RJT = 8,
- BFA_PL_EID_TX_BSY = 9,
- BFA_PL_EID_RX = 10,
- BFA_PL_EID_RX_ACK1 = 11,
- BFA_PL_EID_RX_RJT = 12,
- BFA_PL_EID_RX_BSY = 13,
- BFA_PL_EID_CT_IN = 14,
- BFA_PL_EID_CT_OUT = 15,
- BFA_PL_EID_DRIVER_START = 16,
- BFA_PL_EID_RSCN = 17,
- BFA_PL_EID_DEBUG = 18,
- BFA_PL_EID_MISC = 19,
- BFA_PL_EID_FIP_FCF_DISC = 20,
- BFA_PL_EID_FIP_FCF_CVL = 21,
- BFA_PL_EID_LOGIN = 22,
- BFA_PL_EID_LOGO = 23,
- BFA_PL_EID_MAX = 24
-};
-
-#define BFA_PL_ENAME_STRLEN 8
-struct bfa_plog_eid_strings_s {
- char e_str[BFA_PL_ENAME_STRLEN];
-};
-
-#define BFA_PL_SIG_LEN 8
-#define BFA_PL_SIG_STR "12pl123"
-
-/*
- * per port circular log buffer
- */
-struct bfa_plog_s {
- char plog_sig[BFA_PL_SIG_LEN]; /* Start signature */
- u8 plog_enabled;
- u8 rsvd[7];
- u32 ticks;
- u16 head;
- u16 tail;
- struct bfa_plog_rec_s plog_recs[BFA_PL_NLOG_ENTS];
-};
-
-void bfa_plog_init(struct bfa_plog_s *plog);
-void bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc, char *log_str);
-void bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- u32 *intarr, u32 num_ints);
-void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- struct fchs_s *fchdr);
-void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
- enum bfa_plog_eid event, u16 misc,
- struct fchs_s *fchdr, u32 pld_w0);
-void bfa_plog_clear(struct bfa_plog_s *plog);
-void bfa_plog_enable(struct bfa_plog_s *plog);
-void bfa_plog_disable(struct bfa_plog_s *plog);
-bfa_boolean_t bfa_plog_get_setting(struct bfa_plog_s *plog);
-
-#endif /* __BFA_PORTLOG_H__ */
diff --git a/drivers/scsi/bfa/include/cs/bfa_q.h b/drivers/scsi/bfa/include/cs/bfa_q.h
deleted file mode 100644
index ea895fa..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_q.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_q.h Circular queue definitions.
- */
-
-#ifndef __BFA_Q_H__
-#define __BFA_Q_H__
-
-#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
-#define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
-#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
-
-/*
- * bfa_q_qe_init - to initialize a queue element
- */
-#define bfa_q_qe_init(_qe) { \
- bfa_q_next(_qe) = (struct list_head *) NULL; \
- bfa_q_prev(_qe) = (struct list_head *) NULL; \
-}
-
-/*
- * bfa_q_deq - dequeue an element from head of the queue
- */
-#define bfa_q_deq(_q, _qe) { \
- if (!list_empty(_q)) { \
- (*((struct list_head **) (_qe))) = bfa_q_next(_q); \
- bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) = \
- (struct list_head *) (_q); \
- bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
- BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
- } else { \
- *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
- } \
-}
-
-/*
- * bfa_q_deq_tail - dequeue an element from tail of the queue
- */
-#define bfa_q_deq_tail(_q, _qe) { \
- if (!list_empty(_q)) { \
- *((struct list_head **) (_qe)) = bfa_q_prev(_q); \
- bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = \
- (struct list_head *) (_q); \
- bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe); \
- BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
- } else { \
- *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
- } \
-}
-
-/*
- * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
- * consistent across modules)
- */
-#ifndef BFA_PERF_BUILD
-#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
-#else
-#define BFA_Q_DBG_INIT(_qe)
-#endif
-
-#define bfa_q_is_on_q(_q, _qe) \
- bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
-extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_sm.h b/drivers/scsi/bfa/include/cs/bfa_sm.h
deleted file mode 100644
index 11fba90..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_sm.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfasm.h State machine defines
- */
-
-#ifndef __BFA_SM_H__
-#define __BFA_SM_H__
-
-typedef void (*bfa_sm_t)(void *sm, int event);
-/**
- * oc - object class eg. bfa_ioc
- * st - state, eg. reset
- * otype - object type, eg. struct bfa_ioc_s
- * etype - object type, eg. enum ioc_event
- */
-#define bfa_sm_state_decl(oc, st, otype, etype) \
- static void oc ## _sm_ ## st(otype * fsm, etype event)
-
-#define bfa_sm_set_state(_sm, _state) ((_sm)->sm = (bfa_sm_t)(_state))
-#define bfa_sm_send_event(_sm, _event) ((_sm)->sm((_sm), (_event)))
-#define bfa_sm_get_state(_sm) ((_sm)->sm)
-#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
-
-/**
- * For converting from state machine function to state encoding.
- */
-struct bfa_sm_table_s {
- bfa_sm_t sm; /* state machine function */
- int state; /* state machine encoding */
- char *name; /* state name for display */
-};
-#define BFA_SM(_sm) ((bfa_sm_t)(_sm))
-
-int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
-
-/**
- * State machine with entry actions.
- */
-typedef void (*bfa_fsm_t)(void *fsm, int event);
-
-/**
- * oc - object class eg. bfa_ioc
- * st - state, eg. reset
- * otype - object type, eg. struct bfa_ioc_s
- * etype - object type, eg. enum ioc_event
- */
-#define bfa_fsm_state_decl(oc, st, otype, etype) \
- static void oc ## _sm_ ## st(otype * fsm, etype event); \
- static void oc ## _sm_ ## st ## _entry(otype * fsm)
-
-#define bfa_fsm_set_state(_fsm, _state) do { \
- (_fsm)->fsm = (bfa_fsm_t)(_state); \
- _state ## _entry(_fsm); \
-} while (0)
-
-#define bfa_fsm_send_event(_fsm, _event) \
- ((_fsm)->fsm((_fsm), (_event)))
-#define bfa_fsm_cmp_state(_fsm, _state) \
- ((_fsm)->fsm == (bfa_fsm_t)(_state))
-
-#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_trc.h b/drivers/scsi/bfa/include/cs/bfa_trc.h
deleted file mode 100644
index 310771c..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_trc.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_TRC_H__
-#define __BFA_TRC_H__
-
-#include <bfa_os_inc.h>
-
-#ifndef BFA_TRC_MAX
-#define BFA_TRC_MAX (4 * 1024)
-#endif
-
-#ifndef BFA_TRC_TS
-#define BFA_TRC_TS(_trcm) ((_trcm)->ticks++)
-#endif
-
-struct bfa_trc_s {
-#ifdef __BIGENDIAN
- u16 fileno;
- u16 line;
-#else
- u16 line;
- u16 fileno;
-#endif
- u32 timestamp;
- union {
- struct {
- u32 rsvd;
- u32 u32;
- } u32;
- u64 u64;
- } data;
-};
-
-
-struct bfa_trc_mod_s {
- u32 head;
- u32 tail;
- u32 ntrc;
- u32 stopped;
- u32 ticks;
- u32 rsvd[3];
- struct bfa_trc_s trc[BFA_TRC_MAX];
-};
-
-
-enum {
- BFA_TRC_FW = 1, /* firmware modules */
- BFA_TRC_HAL = 2, /* BFA modules */
- BFA_TRC_FCS = 3, /* BFA FCS modules */
- BFA_TRC_LDRV = 4, /* Linux driver modules */
- BFA_TRC_SDRV = 5, /* Solaris driver modules */
- BFA_TRC_VDRV = 6, /* vmware driver modules */
- BFA_TRC_WDRV = 7, /* windows driver modules */
- BFA_TRC_AEN = 8, /* AEN module */
- BFA_TRC_BIOS = 9, /* bios driver modules */
- BFA_TRC_EFI = 10, /* EFI driver modules */
- BNA_TRC_WDRV = 11, /* BNA windows driver modules */
- BNA_TRC_VDRV = 12, /* BNA vmware driver modules */
- BNA_TRC_SDRV = 13, /* BNA Solaris driver modules */
- BNA_TRC_LDRV = 14, /* BNA Linux driver modules */
- BNA_TRC_HAL = 15, /* BNA modules */
- BFA_TRC_CNA = 16, /* Common modules */
- BNA_TRC_IMDRV = 17 /* BNA windows intermediate driver modules */
-};
-#define BFA_TRC_MOD_SH 10
-#define BFA_TRC_MOD(__mod) ((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
-
-/**
- * Define a new tracing file (module). Module should match one defined above.
- */
-#define BFA_TRC_FILE(__mod, __submod) \
- static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
- BFA_TRC_MOD(__mod))
-
-
-#define bfa_trc32(_trcp, _data) \
- __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
-
-
-#ifndef BFA_BOOT_BUILD
-#define bfa_trc(_trcp, _data) \
- __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
-#else
-void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
- u16 line, u32 data);
-#define bfa_trc(_trcp, _data) \
- bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
-#endif
-
-
-static inline void
-bfa_trc_init(struct bfa_trc_mod_s *trcm)
-{
- trcm->head = trcm->tail = trcm->stopped = 0;
- trcm->ntrc = BFA_TRC_MAX;
-}
-
-
-static inline void
-bfa_trc_stop(struct bfa_trc_mod_s *trcm)
-{
- trcm->stopped = 1;
-}
-
-#ifdef FWTRC
-extern void dc_flush(void *data);
-#else
-#define dc_flush(data)
-#endif
-
-
-static inline void
-__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
-{
- int tail = trcm->tail;
- struct bfa_trc_s *trc = &trcm->trc[tail];
-
- if (trcm->stopped)
- return;
-
- trc->fileno = (u16) fileno;
- trc->line = (u16) line;
- trc->data.u64 = data;
- trc->timestamp = BFA_TRC_TS(trcm);
- dc_flush(trc);
-
- trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
- if (trcm->tail == trcm->head)
- trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
- dc_flush(trcm);
-}
-
-
-static inline void
-__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
-{
- int tail = trcm->tail;
- struct bfa_trc_s *trc = &trcm->trc[tail];
-
- if (trcm->stopped)
- return;
-
- trc->fileno = (u16) fileno;
- trc->line = (u16) line;
- trc->data.u32.u32 = data;
- trc->timestamp = BFA_TRC_TS(trcm);
- dc_flush(trc);
-
- trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
- if (trcm->tail == trcm->head)
- trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
- dc_flush(trcm);
-}
-
-#ifndef BFA_PERF_BUILD
-#define bfa_trc_fp(_trcp, _data) bfa_trc(_trcp, _data)
-#else
-#define bfa_trc_fp(_trcp, _data)
-#endif
-
-#endif /* __BFA_TRC_H__ */
-
diff --git a/drivers/scsi/bfa/include/cs/bfa_wc.h b/drivers/scsi/bfa/include/cs/bfa_wc.h
deleted file mode 100644
index 0460bd4..0000000
--- a/drivers/scsi/bfa/include/cs/bfa_wc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * bfa_wc.h Generic wait counter.
- */
-
-#ifndef __BFA_WC_H__
-#define __BFA_WC_H__
-
-typedef void (*bfa_wc_resume_t) (void *cbarg);
-
-struct bfa_wc_s {
- bfa_wc_resume_t wc_resume;
- void *wc_cbarg;
- int wc_count;
-};
-
-static inline void
-bfa_wc_up(struct bfa_wc_s *wc)
-{
- wc->wc_count++;
-}
-
-static inline void
-bfa_wc_down(struct bfa_wc_s *wc)
-{
- wc->wc_count--;
- if (wc->wc_count == 0)
- wc->wc_resume(wc->wc_cbarg);
-}
-
-/**
- * Initialize a waiting counter.
- */
-static inline void
-bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
-{
- wc->wc_resume = wc_resume;
- wc->wc_cbarg = wc_cbarg;
- wc->wc_count = 0;
- bfa_wc_up(wc);
-}
-
-/**
- * Wait for counter to reach zero
- */
-static inline void
-bfa_wc_wait(struct bfa_wc_s *wc)
-{
- bfa_wc_down(wc);
-}
-
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_fcs.h b/drivers/scsi/bfa/include/log/bfa_log_fcs.h
deleted file mode 100644
index b6f5df8..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_fcs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * messages define for FCS Module
- */
-#ifndef __BFA_LOG_FCS_H__
-#define __BFA_LOG_FCS_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_FCS_FABRIC_NOSWITCH \
- (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_FCS_FABRIC_ISOLATED \
- (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 2)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_hal.h b/drivers/scsi/bfa/include/log/bfa_log_hal.h
deleted file mode 100644
index 5f8f5e3..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_hal.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for HAL Module */
-#ifndef __BFA_LOG_HAL_H__
-#define __BFA_LOG_HAL_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_HAL_ASSERT \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_HAL_HEARTBEAT_FAILURE \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_HAL_FCPIM_PARM_INVALID \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_HAL_SM_ASSERT \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_HAL_DRIVER_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_HAL_DRIVER_CONFIG_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 6)
-#define BFA_LOG_HAL_MBOX_ERROR \
- (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 7)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_linux.h b/drivers/scsi/bfa/include/log/bfa_log_linux.h
deleted file mode 100644
index 44bc897..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_linux.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* messages define for LINUX Module */
-#ifndef __BFA_LOG_LINUX_H__
-#define __BFA_LOG_LINUX_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_LINUX_DEVICE_CLAIMED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_LINUX_HASH_INIT_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_LINUX_SYSFS_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_LINUX_MEM_ALLOC_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_LINUX_ITNIM_FREE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 6)
-#define BFA_LOG_LINUX_ITNIM_ONLINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 7)
-#define BFA_LOG_LINUX_ITNIM_OFFLINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 8)
-#define BFA_LOG_LINUX_SCSI_HOST_FREE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 9)
-#define BFA_LOG_LINUX_SCSI_ABORT \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
-#define BFA_LOG_LINUX_SCSI_ABORT_COMP \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
-#define BFA_LOG_LINUX_DRIVER_CONFIG_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 12)
-#define BFA_LOG_LINUX_BNA_STATE_MACHINE \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 13)
-#define BFA_LOG_LINUX_IOC_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 14)
-#define BFA_LOG_LINUX_RESOURCE_ALLOC_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 15)
-#define BFA_LOG_LINUX_RING_BUFFER_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 16)
-#define BFA_LOG_LINUX_DRIVER_ERROR \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 17)
-#define BFA_LOG_LINUX_DRIVER_INFO \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 18)
-#define BFA_LOG_LINUX_DRIVER_DIAG \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 19)
-#define BFA_LOG_LINUX_DRIVER_AEN \
- (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 20)
-#endif
diff --git a/drivers/scsi/bfa/include/log/bfa_log_wdrv.h b/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
deleted file mode 100644
index 809a95f..0000000
--- a/drivers/scsi/bfa/include/log/bfa_log_wdrv.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * messages define for WDRV Module
- */
-#ifndef __BFA_LOG_WDRV_H__
-#define __BFA_LOG_WDRV_H__
-#include <cs/bfa_log.h>
-#define BFA_LOG_WDRV_IOC_INIT_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 1)
-#define BFA_LOG_WDRV_IOC_INTERNAL_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 2)
-#define BFA_LOG_WDRV_IOC_START_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 3)
-#define BFA_LOG_WDRV_IOC_STOP_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 4)
-#define BFA_LOG_WDRV_INSUFFICIENT_RESOURCES \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 5)
-#define BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR \
- (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 6)
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
deleted file mode 100644
index b82540a..0000000
--- a/drivers/scsi/bfa/include/protocol/ct.h
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __CT_H__
-#define __CT_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-struct ct_hdr_s{
- u32 rev_id:8; /* Revision of the CT */
- u32 in_id:24; /* Initiator Id */
- u32 gs_type:8; /* Generic service Type */
- u32 gs_sub_type:8; /* Generic service sub type */
- u32 options:8; /* options */
- u32 rsvrd:8; /* reserved */
- u32 cmd_rsp_code:16;/* ct command/response code */
- u32 max_res_size:16;/* maximum/residual size */
- u32 frag_id:8; /* fragment ID */
- u32 reason_code:8; /* reason code */
- u32 exp_code:8; /* explanation code */
- u32 vendor_unq:8; /* vendor unique */
-};
-
-/*
- * defines for the Revision
- */
-enum {
- CT_GS3_REVISION = 0x01,
-};
-
-/*
- * defines for gs_type
- */
-enum {
- CT_GSTYPE_KEYSERVICE = 0xF7,
- CT_GSTYPE_ALIASSERVICE = 0xF8,
- CT_GSTYPE_MGMTSERVICE = 0xFA,
- CT_GSTYPE_TIMESERVICE = 0xFB,
- CT_GSTYPE_DIRSERVICE = 0xFC,
-};
-
-/*
- * defines for gs_sub_type for gs type directory service
- */
-enum {
- CT_GSSUBTYPE_NAMESERVER = 0x02,
-};
-
-/*
- * defines for gs_sub_type for gs type management service
- */
-enum {
- CT_GSSUBTYPE_CFGSERVER = 0x01,
- CT_GSSUBTYPE_UNZONED_NS = 0x02,
- CT_GSSUBTYPE_ZONESERVER = 0x03,
- CT_GSSUBTYPE_LOCKSERVER = 0x04,
- CT_GSSUBTYPE_HBA_MGMTSERVER = 0x10, /* for FDMI */
-};
-
-/*
- * defines for CT response code field
- */
-enum {
- CT_RSP_REJECT = 0x8001,
- CT_RSP_ACCEPT = 0x8002,
-};
-
-/*
- * definitions for CT reason code
- */
-enum {
- CT_RSN_INV_CMD = 0x01,
- CT_RSN_INV_VER = 0x02,
- CT_RSN_LOGIC_ERR = 0x03,
- CT_RSN_INV_SIZE = 0x04,
- CT_RSN_LOGICAL_BUSY = 0x05,
- CT_RSN_PROTO_ERR = 0x07,
- CT_RSN_UNABLE_TO_PERF = 0x09,
- CT_RSN_NOT_SUPP = 0x0B,
- CT_RSN_SERVER_NOT_AVBL = 0x0D,
- CT_RSN_SESSION_COULD_NOT_BE_ESTBD = 0x0E,
- CT_RSN_VENDOR_SPECIFIC = 0xFF,
-
-};
-
-/*
- * definitions for explanations code for Name server
- */
-enum {
- CT_NS_EXP_NOADDITIONAL = 0x00,
- CT_NS_EXP_ID_NOT_REG = 0x01,
- CT_NS_EXP_PN_NOT_REG = 0x02,
- CT_NS_EXP_NN_NOT_REG = 0x03,
- CT_NS_EXP_CS_NOT_REG = 0x04,
- CT_NS_EXP_IPN_NOT_REG = 0x05,
- CT_NS_EXP_IPA_NOT_REG = 0x06,
- CT_NS_EXP_FT_NOT_REG = 0x07,
- CT_NS_EXP_SPN_NOT_REG = 0x08,
- CT_NS_EXP_SNN_NOT_REG = 0x09,
- CT_NS_EXP_PT_NOT_REG = 0x0A,
- CT_NS_EXP_IPP_NOT_REG = 0x0B,
- CT_NS_EXP_FPN_NOT_REG = 0x0C,
- CT_NS_EXP_HA_NOT_REG = 0x0D,
- CT_NS_EXP_FD_NOT_REG = 0x0E,
- CT_NS_EXP_FF_NOT_REG = 0x0F,
- CT_NS_EXP_ACCESSDENIED = 0x10,
- CT_NS_EXP_UNACCEPTABLE_ID = 0x11,
- CT_NS_EXP_DATABASEEMPTY = 0x12,
- CT_NS_EXP_NOT_REG_IN_SCOPE = 0x13,
- CT_NS_EXP_DOM_ID_NOT_PRESENT = 0x14,
- CT_NS_EXP_PORT_NUM_NOT_PRESENT = 0x15,
- CT_NS_EXP_NO_DEVICE_ATTACHED = 0x16
-};
-
-/*
- * definitions for the explanation code for all servers
- */
-enum {
- CT_EXP_AUTH_EXCEPTION = 0xF1,
- CT_EXP_DB_FULL = 0xF2,
- CT_EXP_DB_EMPTY = 0xF3,
- CT_EXP_PROCESSING_REQ = 0xF4,
- CT_EXP_UNABLE_TO_VERIFY_CONN = 0xF5,
- CT_EXP_DEVICES_NOT_IN_CMN_ZONE = 0xF6
-};
-
-/*
- * Command codes for Name server
- */
-enum {
- GS_GID_PN = 0x0121, /* Get Id on port name */
- GS_GPN_ID = 0x0112, /* Get port name on ID */
- GS_GNN_ID = 0x0113, /* Get node name on ID */
- GS_GID_FT = 0x0171, /* Get Id on FC4 type */
- GS_GSPN_ID = 0x0118, /* Get symbolic PN on ID */
- GS_RFT_ID = 0x0217, /* Register fc4type on ID */
- GS_RSPN_ID = 0x0218, /* Register symbolic PN on ID */
- GS_RPN_ID = 0x0212, /* Register port name */
- GS_RNN_ID = 0x0213, /* Register node name */
- GS_RCS_ID = 0x0214, /* Register class of service */
- GS_RPT_ID = 0x021A, /* Register port type */
- GS_GA_NXT = 0x0100, /* Get all next */
- GS_RFF_ID = 0x021F, /* Register FC4 Feature */
-};
-
-struct fcgs_id_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
-};
-#define fcgs_gpnid_req_t struct fcgs_id_req_s
-#define fcgs_gnnid_req_t struct fcgs_id_req_s
-#define fcgs_gspnid_req_t struct fcgs_id_req_s
-
-struct fcgs_gidpn_req_s{
- wwn_t port_name; /* port wwn */
-};
-
-struct fcgs_gidpn_resp_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
-};
-
-/**
- * RFT_ID
- */
-struct fcgs_rftid_req_s {
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u32 fc4_type[8]; /* fc4 types */
-};
-
-/**
- * RFF_ID : Register FC4 features.
- */
-
-#define FC_GS_FCP_FC4_FEATURE_INITIATOR 0x02
-#define FC_GS_FCP_FC4_FEATURE_TARGET 0x01
-
-struct fcgs_rffid_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u32 rsvd1:16;
- u32 fc4ftr_bits:8; /* fc4 feature bits */
- u32 fc4_type:8; /* corresponding FC4 Type */
-};
-
-/**
- * GID_FT Request
- */
-struct fcgs_gidft_req_s{
- u8 reserved;
- u8 domain_id; /* domain, 0 - all fabric */
- u8 area_id; /* area, 0 - whole domain */
- u8 fc4_type; /* FC_TYPE_FCP for SCSI devices */
-}; /* GID_FT Request */
-
-/**
- * GID_FT Response
- */
-struct fcgs_gidft_resp_s {
- u8 last:1; /* last port identifier flag */
- u8 reserved:7;
- u32 pid:24; /* port identifier */
-}; /* GID_FT Response */
-
-/**
- * RSPN_ID
- */
-struct fcgs_rspnid_req_s{
- u32 rsvd:8;
- u32 dap:24; /* port identifier */
- u8 spn_len; /* symbolic port name length */
- u8 spn[256]; /* symbolic port name */
-};
-
-/**
- * RPN_ID
- */
-struct fcgs_rpnid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- wwn_t port_name;
-};
-
-/**
- * RNN_ID
- */
-struct fcgs_rnnid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- wwn_t node_name;
-};
-
-/**
- * RCS_ID
- */
-struct fcgs_rcsid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- u32 cos;
-};
-
-/**
- * RPT_ID
- */
-struct fcgs_rptid_req_s{
- u32 rsvd:8;
- u32 port_id:24;
- u32 port_type:8;
- u32 rsvd1:24;
-};
-
-/**
- * GA_NXT Request
- */
-struct fcgs_ganxt_req_s{
- u32 rsvd:8;
- u32 port_id:24;
-};
-
-/**
- * GA_NXT Response
- */
-struct fcgs_ganxt_rsp_s{
- u32 port_type:8; /* Port Type */
- u32 port_id:24; /* Port Identifier */
- wwn_t port_name; /* Port Name */
- u8 spn_len; /* Length of Symbolic Port Name */
- char spn[255]; /* Symbolic Port Name */
- wwn_t node_name; /* Node Name */
- u8 snn_len; /* Length of Symbolic Node Name */
- char snn[255]; /* Symbolic Node Name */
- u8 ipa[8]; /* Initial Process Associator */
- u8 ip[16]; /* IP Address */
- u32 cos; /* Class of Service */
- u32 fc4types[8]; /* FC-4 TYPEs */
- wwn_t fabric_port_name;
- /* Fabric Port Name */
- u32 rsvd:8; /* Reserved */
- u32 hard_addr:24; /* Hard Address */
-};
-
-/*
- * Fabric Config Server
- */
-
-/*
- * Command codes for Fabric Configuration Server
- */
-enum {
- GS_FC_GFN_CMD = 0x0114, /* GS FC Get Fabric Name */
- GS_FC_GMAL_CMD = 0x0116, /* GS FC GMAL */
- GS_FC_TRACE_CMD = 0x0400, /* GS FC Trace Route */
- GS_FC_PING_CMD = 0x0401, /* GS FC Ping */
-};
-
-/*
- * Source or Destination Port Tags.
- */
-enum {
- GS_FTRACE_TAG_NPORT_ID = 1,
- GS_FTRACE_TAG_NPORT_NAME = 2,
-};
-
-/*
-* Port Value : Could be a Port id or wwn
- */
-union fcgs_port_val_u{
- u32 nport_id;
- wwn_t nport_wwn;
-};
-
-#define GS_FTRACE_MAX_HOP_COUNT 20
-#define GS_FTRACE_REVISION 1
-
-/*
- * Ftrace Related Structures.
- */
-
-/*
- * STR (Switch Trace) Reject Reason Codes. From FC-SW.
- */
-enum {
- GS_FTRACE_STR_CMD_COMPLETED_SUCC = 0,
- GS_FTRACE_STR_CMD_NOT_SUPP_IN_NEXT_SWITCH,
- GS_FTRACE_STR_NO_RESP_FROM_NEXT_SWITCH,
- GS_FTRACE_STR_MAX_HOP_CNT_REACHED,
- GS_FTRACE_STR_SRC_PORT_NOT_FOUND,
- GS_FTRACE_STR_DST_PORT_NOT_FOUND,
- GS_FTRACE_STR_DEVICES_NOT_IN_COMMON_ZONE,
- GS_FTRACE_STR_NO_ROUTE_BW_PORTS,
- GS_FTRACE_STR_NO_ADDL_EXPLN,
- GS_FTRACE_STR_FABRIC_BUSY,
- GS_FTRACE_STR_FABRIC_BUILD_IN_PROGRESS,
- GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_START = 0xf0,
- GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_END = 0xff,
-};
-
-/*
- * Ftrace Request
- */
-struct fcgs_ftrace_req_s{
- u32 revision;
- u16 src_port_tag; /* Source Port tag */
- u16 src_port_len; /* Source Port len */
- union fcgs_port_val_u src_port_val; /* Source Port value */
- u16 dst_port_tag; /* Destination Port tag */
- u16 dst_port_len; /* Destination Port len */
- union fcgs_port_val_u dst_port_val; /* Destination Port value */
- u32 token;
- u8 vendor_id[8]; /* T10 Vendor Identifier */
- u8 vendor_info[8]; /* Vendor specific Info */
- u32 max_hop_cnt; /* Max Hop Count */
-};
-
-/*
- * Path info structure
- */
-struct fcgs_ftrace_path_info_s{
- wwn_t switch_name; /* Switch WWN */
- u32 domain_id;
- wwn_t ingress_port_name; /* Ingress ports wwn */
- u32 ingress_phys_port_num; /* Ingress ports physical port
- * number
- */
- wwn_t egress_port_name; /* Ingress ports wwn */
- u32 egress_phys_port_num; /* Ingress ports physical port
- * number
- */
-};
-
-/*
- * Ftrace Acc Response
- */
-struct fcgs_ftrace_resp_s{
- u32 revision;
- u32 token;
- u8 vendor_id[8]; /* T10 Vendor Identifier */
- u8 vendor_info[8]; /* Vendor specific Info */
- u32 str_rej_reason_code; /* STR Reject Reason Code */
- u32 num_path_info_entries; /* No. of path info entries */
- /*
- * path info entry/entries.
- */
- struct fcgs_ftrace_path_info_s path_info[1];
-
-};
-
-/*
-* Fabric Config Server : FCPing
- */
-
-/*
- * FC Ping Request
- */
-struct fcgs_fcping_req_s{
- u32 revision;
- u16 port_tag;
- u16 port_len; /* Port len */
- union fcgs_port_val_u port_val; /* Port value */
- u32 token;
-};
-
-/*
- * FC Ping Response
- */
-struct fcgs_fcping_resp_s{
- u32 token;
-};
-
-/*
- * Command codes for zone server query.
- */
-enum {
- ZS_GZME = 0x0124, /* Get zone member extended */
-};
-
-/*
- * ZS GZME request
- */
-#define ZS_GZME_ZNAMELEN 32
-struct zs_gzme_req_s{
- u8 znamelen;
- u8 rsvd[3];
- u8 zname[ZS_GZME_ZNAMELEN];
-};
-
-enum zs_mbr_type{
- ZS_MBR_TYPE_PWWN = 1,
- ZS_MBR_TYPE_DOMPORT = 2,
- ZS_MBR_TYPE_PORTID = 3,
- ZS_MBR_TYPE_NWWN = 4,
-};
-
-struct zs_mbr_wwn_s{
- u8 mbr_type;
- u8 rsvd[3];
- wwn_t wwn;
-};
-
-struct zs_query_resp_s{
- u32 nmbrs; /* number of zone members */
- struct zs_mbr_wwn_s mbr[1];
-};
-
-/*
- * GMAL Command ( Get ( interconnect Element) Management Address List)
- * To retrieve the IP Address of a Switch.
- */
-
-#define CT_GMAL_RESP_PREFIX_TELNET "telnet://"
-#define CT_GMAL_RESP_PREFIX_HTTP "http://";
-
-/* GMAL/GFN request */
-struct fcgs_req_s {
- wwn_t wwn; /* PWWN/NWWN */
-};
-
-#define fcgs_gmal_req_t struct fcgs_req_s
-#define fcgs_gfn_req_t struct fcgs_req_s
-
-/* Accept Response to GMAL */
-struct fcgs_gmal_resp_s {
- u32 ms_len; /* Num of entries */
- u8 ms_ma[256];
-};
-
-struct fc_gmal_entry_s {
- u8 len;
- u8 prefix[7]; /* like "http://"; */
- u8 ip_addr[248];
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc.h b/drivers/scsi/bfa/include/protocol/fc.h
deleted file mode 100644
index 436dd7c..0000000
--- a/drivers/scsi/bfa/include/protocol/fc.h
+++ /dev/null
@@ -1,1111 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FC_H__
-#define __FC_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-/*
- * Fibre Channel Header Structure (FCHS) definition
- */
-struct fchs_s {
-#ifdef __BIGENDIAN
- u32 routing:4; /* routing bits */
- u32 cat_info:4; /* category info */
-#else
- u32 cat_info:4; /* category info */
- u32 routing:4; /* routing bits */
-#endif
- u32 d_id:24; /* destination identifier */
-
- u32 cs_ctl:8; /* class specific control */
- u32 s_id:24; /* source identifier */
-
- u32 type:8; /* data structure type */
- u32 f_ctl:24; /* initial frame control */
-
- u8 seq_id; /* sequence identifier */
- u8 df_ctl; /* data field control */
- u16 seq_cnt; /* sequence count */
-
- u16 ox_id; /* originator exchange ID */
- u16 rx_id; /* responder exchange ID */
-
- u32 ro; /* relative offset */
-};
-
-#define FC_SOF_LEN 4
-#define FC_EOF_LEN 4
-#define FC_CRC_LEN 4
-
-/*
- * Fibre Channel BB_E Header Structure
- */
-struct fcbbehs_s {
- u16 ver_rsvd;
- u32 rsvd[2];
- u32 rsvd__sof;
-};
-
-#define FC_SEQ_ID_MAX 256
-
-/*
- * routing bit definitions
- */
-enum {
- FC_RTG_FC4_DEV_DATA = 0x0, /* FC-4 Device Data */
- FC_RTG_EXT_LINK = 0x2, /* Extended Link Data */
- FC_RTG_FC4_LINK_DATA = 0x3, /* FC-4 Link Data */
- FC_RTG_VIDEO_DATA = 0x4, /* Video Data */
- FC_RTG_EXT_HDR = 0x5, /* VFT, IFR or Encapsuled */
- FC_RTG_BASIC_LINK = 0x8, /* Basic Link data */
- FC_RTG_LINK_CTRL = 0xC, /* Link Control */
-};
-
-/*
- * information category for extended link data and FC-4 Link Data
- */
-enum {
- FC_CAT_LD_REQUEST = 0x2, /* Request */
- FC_CAT_LD_REPLY = 0x3, /* Reply */
- FC_CAT_LD_DIAG = 0xF, /* for DIAG use only */
-};
-
-/*
- * information category for extended headers (VFT, IFR or encapsulation)
- */
-enum {
- FC_CAT_VFT_HDR = 0x0, /* Virtual fabric tagging header */
- FC_CAT_IFR_HDR = 0x1, /* Inter-Fabric routing header */
- FC_CAT_ENC_HDR = 0x2, /* Encapsulation header */
-};
-
-/*
- * information category for FC-4 device data
- */
-enum {
- FC_CAT_UNCATEG_INFO = 0x0, /* Uncategorized information */
- FC_CAT_SOLICIT_DATA = 0x1, /* Solicited Data */
- FC_CAT_UNSOLICIT_CTRL = 0x2, /* Unsolicited Control */
- FC_CAT_SOLICIT_CTRL = 0x3, /* Solicited Control */
- FC_CAT_UNSOLICIT_DATA = 0x4, /* Unsolicited Data */
- FC_CAT_DATA_DESC = 0x5, /* Data Descriptor */
- FC_CAT_UNSOLICIT_CMD = 0x6, /* Unsolicited Command */
- FC_CAT_CMD_STATUS = 0x7, /* Command Status */
-};
-
-/*
- * information category for Link Control
- */
-enum {
- FC_CAT_ACK_1 = 0x00,
- FC_CAT_ACK_0_N = 0x01,
- FC_CAT_P_RJT = 0x02,
- FC_CAT_F_RJT = 0x03,
- FC_CAT_P_BSY = 0x04,
- FC_CAT_F_BSY_DATA = 0x05,
- FC_CAT_F_BSY_LINK_CTL = 0x06,
- FC_CAT_F_LCR = 0x07,
- FC_CAT_NTY = 0x08,
- FC_CAT_END = 0x09,
-};
-
-/*
- * Type Field Definitions. FC-PH Section 18.5 pg. 165
- */
-enum {
- FC_TYPE_BLS = 0x0, /* Basic Link Service */
- FC_TYPE_ELS = 0x1, /* Extended Link Service */
- FC_TYPE_IP = 0x5, /* IP */
- FC_TYPE_FCP = 0x8, /* SCSI-FCP */
- FC_TYPE_GPP = 0x9, /* SCSI_GPP */
- FC_TYPE_SERVICES = 0x20, /* Fibre Channel Services */
- FC_TYPE_FC_FSS = 0x22, /* Fabric Switch Services */
- FC_TYPE_FC_AL = 0x23, /* FC-AL */
- FC_TYPE_FC_SNMP = 0x24, /* FC-SNMP */
- FC_TYPE_MAX = 256, /* 256 FC-4 types */
-};
-
-struct fc_fc4types_s{
- u8 bits[FC_TYPE_MAX / 8];
-};
-
-/*
- * Frame Control Definitions. FC-PH Table-45. pg. 168
- */
-enum {
- FCTL_EC_ORIG = 0x000000, /* exchange originator */
- FCTL_EC_RESP = 0x800000, /* exchange responder */
- FCTL_SEQ_INI = 0x000000, /* sequence initiator */
- FCTL_SEQ_REC = 0x400000, /* sequence recipient */
- FCTL_FS_EXCH = 0x200000, /* first sequence of xchg */
- FCTL_LS_EXCH = 0x100000, /* last sequence of xchg */
- FCTL_END_SEQ = 0x080000, /* last frame of sequence */
- FCTL_SI_XFER = 0x010000, /* seq initiative transfer */
- FCTL_RO_PRESENT = 0x000008, /* relative offset present */
- FCTL_FILLBYTE_MASK = 0x000003 /* , fill byte mask */
-};
-
-/*
- * Fabric Well Known Addresses
- */
-enum {
- FC_MIN_WELL_KNOWN_ADDR = 0xFFFFF0,
- FC_DOMAIN_CONTROLLER_MASK = 0xFFFC00,
- FC_ALIAS_SERVER = 0xFFFFF8,
- FC_MGMT_SERVER = 0xFFFFFA,
- FC_TIME_SERVER = 0xFFFFFB,
- FC_NAME_SERVER = 0xFFFFFC,
- FC_FABRIC_CONTROLLER = 0xFFFFFD,
- FC_FABRIC_PORT = 0xFFFFFE,
- FC_BROADCAST_SERVER = 0xFFFFFF
-};
-
-/*
- * domain/area/port defines
- */
-#define FC_DOMAIN_MASK 0xFF0000
-#define FC_DOMAIN_SHIFT 16
-#define FC_AREA_MASK 0x00FF00
-#define FC_AREA_SHIFT 8
-#define FC_PORT_MASK 0x0000FF
-#define FC_PORT_SHIFT 0
-
-#define FC_GET_DOMAIN(p) (((p) & FC_DOMAIN_MASK) >> FC_DOMAIN_SHIFT)
-#define FC_GET_AREA(p) (((p) & FC_AREA_MASK) >> FC_AREA_SHIFT)
-#define FC_GET_PORT(p) (((p) & FC_PORT_MASK) >> FC_PORT_SHIFT)
-
-#define FC_DOMAIN_CTRLR(p) (FC_DOMAIN_CONTROLLER_MASK | (FC_GET_DOMAIN(p)))
-
-enum {
- FC_RXID_ANY = 0xFFFFU,
-};
-
-/*
- * generic ELS command
- */
-struct fc_els_cmd_s{
- u32 els_code:8; /* ELS Command Code */
- u32 reserved:24;
-};
-
-/*
- * ELS Command Codes. FC-PH Table-75. pg. 223
- */
-enum {
- FC_ELS_LS_RJT = 0x1, /* Link Service Reject. */
- FC_ELS_ACC = 0x02, /* Accept */
- FC_ELS_PLOGI = 0x03, /* N_Port Login. */
- FC_ELS_FLOGI = 0x04, /* F_Port Login. */
- FC_ELS_LOGO = 0x05, /* Logout. */
- FC_ELS_ABTX = 0x06, /* Abort Exchange */
- FC_ELS_RES = 0x08, /* Read Exchange status */
- FC_ELS_RSS = 0x09, /* Read sequence status block */
- FC_ELS_RSI = 0x0A, /* Request Sequence Initiative */
- FC_ELS_ESTC = 0x0C, /* Estimate Credit. */
- FC_ELS_RTV = 0x0E, /* Read Timeout Value. */
- FC_ELS_RLS = 0x0F, /* Read Link Status. */
- FC_ELS_ECHO = 0x10, /* Echo */
- FC_ELS_TEST = 0x11, /* Test */
- FC_ELS_RRQ = 0x12, /* Reinstate Recovery Qualifier. */
- FC_ELS_REC = 0x13, /* Add this for TAPE support in FCR */
- FC_ELS_PRLI = 0x20, /* Process Login */
- FC_ELS_PRLO = 0x21, /* Process Logout. */
- FC_ELS_SCN = 0x22, /* State Change Notification. */
- FC_ELS_TPRLO = 0x24, /* Third Party Process Logout. */
- FC_ELS_PDISC = 0x50, /* Discover N_Port Parameters. */
- FC_ELS_FDISC = 0x51, /* Discover F_Port Parameters. */
- FC_ELS_ADISC = 0x52, /* Discover Address. */
- FC_ELS_FAN = 0x60, /* Fabric Address Notification */
- FC_ELS_RSCN = 0x61, /* Reg State Change Notification */
- FC_ELS_SCR = 0x62, /* State Change Registration. */
- FC_ELS_RTIN = 0x77, /* Mangement server request */
- FC_ELS_RNID = 0x78, /* Mangement server request */
- FC_ELS_RLIR = 0x79, /* Registered Link Incident Record */
-
- FC_ELS_RPSC = 0x7D, /* Report Port Speed Capabilities */
- FC_ELS_QSA = 0x7E, /* Query Security Attributes. Ref FC-SP */
- FC_ELS_E2E_LBEACON = 0x81,
- /* End-to-End Link Beacon */
- FC_ELS_AUTH = 0x90, /* Authentication. Ref FC-SP */
- FC_ELS_RFCN = 0x97, /* Request Fabric Change Notification. Ref
- *FC-SP */
-
-};
-
-/*
- * Version numbers for FC-PH standards,
- * used in login to indicate what port
- * supports. See FC-PH-X table 158.
- */
-enum {
- FC_PH_VER_4_3 = 0x09,
- FC_PH_VER_PH_3 = 0x20,
-};
-
-/*
- * PDU size defines
- */
-enum {
- FC_MIN_PDUSZ = 512,
- FC_MAX_PDUSZ = 2112,
-};
-
-/*
- * N_Port PLOGI Common Service Parameters.
- * FC-PH-x. Figure-76. pg. 308.
- */
-struct fc_plogi_csp_s{
- u8 verhi; /* FC-PH high version */
- u8 verlo; /* FC-PH low version */
- u16 bbcred; /* BB_Credit */
-
-#ifdef __BIGENDIAN
- u8 ciro:1, /* continuously increasing RO */
- rro:1, /* random relative offset */
- npiv_supp:1, /* NPIV supported */
- port_type:1, /* N_Port/F_port */
- altbbcred:1, /* alternate BB_Credit */
- resolution:1, /* ms/ns ED_TOV resolution */
- vvl_info:1, /* VVL Info included */
- reserved1:1;
-
- u8 hg_supp:1,
- query_dbc:1,
- security:1,
- sync_cap:1,
- r_t_tov:1,
- dh_dup_supp:1,
- cisc:1, /* continuously increasing seq count */
- payload:1;
-#else
- u8 reserved2:2,
- resolution:1, /* ms/ns ED_TOV resolution */
- altbbcred:1, /* alternate BB_Credit */
- port_type:1, /* N_Port/F_port */
- npiv_supp:1, /* NPIV supported */
- rro:1, /* random relative offset */
- ciro:1; /* continuously increasing RO */
-
- u8 payload:1,
- cisc:1, /* continuously increasing seq count */
- dh_dup_supp:1,
- r_t_tov:1,
- sync_cap:1,
- security:1,
- query_dbc:1,
- hg_supp:1;
-#endif
-
- u16 rxsz; /* recieve data_field size */
-
- u16 conseq;
- u16 ro_bitmap;
-
- u32 e_d_tov;
-};
-
-/*
- * N_Port PLOGI Class Specific Parameters.
- * FC-PH-x. Figure 78. pg. 318.
- */
-struct fc_plogi_clp_s{
-#ifdef __BIGENDIAN
- u32 class_valid:1;
- u32 intermix:1; /* class intermix supported if set =1.
- * valid only for class1. Reserved for
- * class2 & class3
- */
- u32 reserved1:2;
- u32 sequential:1;
- u32 reserved2:3;
-#else
- u32 reserved2:3;
- u32 sequential:1;
- u32 reserved1:2;
- u32 intermix:1; /* class intermix supported if set =1.
- * valid only for class1. Reserved for
- * class2 & class3
- */
- u32 class_valid:1;
-#endif
-
- u32 reserved3:24;
-
- u32 reserved4:16;
- u32 rxsz:16; /* Receive data_field size */
-
- u32 reserved5:8;
- u32 conseq:8;
- u32 e2e_credit:16; /* end to end credit */
-
- u32 reserved7:8;
- u32 ospx:8;
- u32 reserved8:16;
-};
-
-#define FLOGI_VVL_BRCD 0x42524344 /* ASCII value for each character in
- * string "BRCD" */
-
-/*
- * PLOGI els command and reply payload
- */
-struct fc_logi_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- struct fc_plogi_csp_s csp; /* common service params */
- wwn_t port_name;
- wwn_t node_name;
- struct fc_plogi_clp_s class1; /* class 1 service parameters */
- struct fc_plogi_clp_s class2; /* class 2 service parameters */
- struct fc_plogi_clp_s class3; /* class 3 service parameters */
- struct fc_plogi_clp_s class4; /* class 4 service parameters */
- u8 vvl[16]; /* vendor version level */
-};
-
-/*
- * LOGO els command payload
- */
-struct fc_logo_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- wwn_t orig_port_name; /* Port name of the LOGO originator */
-};
-
-/*
- * ADISC els command payload
- */
-struct fc_adisc_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 orig_HA:24; /* originator hard address */
- wwn_t orig_port_name; /* originator port name */
- wwn_t orig_node_name; /* originator node name */
- u32 res2:8;
- u32 nport_id:24; /* originator NPortID */
-};
-
-/*
- * Exchange status block
- */
-struct fc_exch_status_blk_s{
- u32 oxid:16;
- u32 rxid:16;
- u32 res1:8;
- u32 orig_np:24; /* originator NPortID */
- u32 res2:8;
- u32 resp_np:24; /* responder NPortID */
- u32 es_bits;
- u32 res3;
- /*
- * un modified section of the fields
- */
-};
-
-/*
- * RES els command payload
- */
-struct fc_res_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- u32 oxid:16;
- u32 rxid:16;
- u8 assoc_hdr[32];
-};
-
-/*
- * RES els accept payload
- */
-struct fc_res_acc_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- struct fc_exch_status_blk_s fc_exch_blk; /* Exchange status block */
-};
-
-/*
- * REC els command payload
- */
-struct fc_rec_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 nport_id:24; /* N_Port identifier of source */
- u32 oxid:16;
- u32 rxid:16;
-};
-
-#define FC_REC_ESB_OWN_RSP 0x80000000 /* responder owns */
-#define FC_REC_ESB_SI 0x40000000 /* SI is owned */
-#define FC_REC_ESB_COMP 0x20000000 /* exchange is complete */
-#define FC_REC_ESB_ENDCOND_ABN 0x10000000 /* abnormal ending */
-#define FC_REC_ESB_RQACT 0x04000000 /* recovery qual active */
-#define FC_REC_ESB_ERRP_MSK 0x03000000
-#define FC_REC_ESB_OXID_INV 0x00800000 /* invalid OXID */
-#define FC_REC_ESB_RXID_INV 0x00400000 /* invalid RXID */
-#define FC_REC_ESB_PRIO_INUSE 0x00200000
-
-/*
- * REC els accept payload
- */
-struct fc_rec_acc_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 oxid:16;
- u32 rxid:16;
- u32 res1:8;
- u32 orig_id:24; /* N_Port id of exchange originator */
- u32 res2:8;
- u32 resp_id:24; /* N_Port id of exchange responder */
- u32 count; /* data transfer count */
- u32 e_stat; /* exchange status */
-};
-
-/*
- * RSI els payload
- */
-struct fc_rsi_s {
- struct fc_els_cmd_s els_cmd;
- u32 res1:8;
- u32 orig_sid:24;
- u32 oxid:16;
- u32 rxid:16;
-};
-
-/*
- * structure for PRLI paramater pages, both request & response
- * see FC-PH-X table 113 & 115 for explanation also FCP table 8
- */
-struct fc_prli_params_s{
- u32 reserved:16;
-#ifdef __BIGENDIAN
- u32 reserved1:5;
- u32 rec_support:1;
- u32 task_retry_id:1;
- u32 retry:1;
-
- u32 confirm:1;
- u32 doverlay:1;
- u32 initiator:1;
- u32 target:1;
- u32 cdmix:1;
- u32 drmix:1;
- u32 rxrdisab:1;
- u32 wxrdisab:1;
-#else
- u32 retry:1;
- u32 task_retry_id:1;
- u32 rec_support:1;
- u32 reserved1:5;
-
- u32 wxrdisab:1;
- u32 rxrdisab:1;
- u32 drmix:1;
- u32 cdmix:1;
- u32 target:1;
- u32 initiator:1;
- u32 doverlay:1;
- u32 confirm:1;
-#endif
-};
-
-/*
- * valid values for rspcode in PRLI ACC payload
- */
-enum {
- FC_PRLI_ACC_XQTD = 0x1, /* request executed */
- FC_PRLI_ACC_PREDEF_IMG = 0x5, /* predefined image - no prli needed */
-};
-
-struct fc_prli_params_page_s{
- u32 type:8;
- u32 codext:8;
-#ifdef __BIGENDIAN
- u32 origprocasv:1;
- u32 rsppav:1;
- u32 imagepair:1;
- u32 reserved1:1;
- u32 rspcode:4;
-#else
- u32 rspcode:4;
- u32 reserved1:1;
- u32 imagepair:1;
- u32 rsppav:1;
- u32 origprocasv:1;
-#endif
- u32 reserved2:8;
-
- u32 origprocas;
- u32 rspprocas;
- struct fc_prli_params_s servparams;
-};
-
-/*
- * PRLI request and accept payload, FC-PH-X tables 112 & 114
- */
-struct fc_prli_s{
- u32 command:8;
- u32 pglen:8;
- u32 pagebytes:16;
- struct fc_prli_params_page_s parampage;
-};
-
-/*
- * PRLO logout params page
- */
-struct fc_prlo_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-#ifdef __BIGENDIAN
- u32 opa_valid:1; /* originator process associator
- * valid
- */
- u32 rpa_valid:1; /* responder process associator valid */
- u32 res1:14;
-#else
- u32 res1:14;
- u32 rpa_valid:1; /* responder process associator valid */
- u32 opa_valid:1; /* originator process associator
- * valid
- */
-#endif
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 res2;
-};
-
-/*
- * PRLO els command payload
- */
-struct fc_prlo_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_params_page_s prlo_params[1];
-};
-
-/*
- * PRLO Logout response parameter page
- */
-struct fc_prlo_acc_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-
-#ifdef __BIGENDIAN
- u32 opa_valid:1; /* originator process associator
- * valid
- */
- u32 rpa_valid:1; /* responder process associator valid */
- u32 res1:14;
-#else
- u32 res1:14;
- u32 rpa_valid:1; /* responder process associator valid */
- u32 opa_valid:1; /* originator process associator
- * valid
- */
-#endif
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 fc4type_csp;
-};
-
-/*
- * PRLO els command ACC payload
- */
-struct fc_prlo_acc_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_acc_params_page_s prlo_acc_params[1];
-};
-
-/*
- * SCR els command payload
- */
-enum {
- FC_SCR_REG_FUNC_FABRIC_DETECTED = 0x01,
- FC_SCR_REG_FUNC_N_PORT_DETECTED = 0x02,
- FC_SCR_REG_FUNC_FULL = 0x03,
- FC_SCR_REG_FUNC_CLEAR_REG = 0xFF,
-};
-
-/* SCR VU registrations */
-enum {
- FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE = 0x01
-};
-
-struct fc_scr_s{
- u32 command:8;
- u32 res:24;
- u32 vu_reg_func:8; /* Vendor Unique Registrations */
- u32 res1:16;
- u32 reg_func:8;
-};
-
-/*
- * Information category for Basic link data
- */
-enum {
- FC_CAT_NOP = 0x0,
- FC_CAT_ABTS = 0x1,
- FC_CAT_RMC = 0x2,
- FC_CAT_BA_ACC = 0x4,
- FC_CAT_BA_RJT = 0x5,
- FC_CAT_PRMT = 0x6,
-};
-
-/*
- * LS_RJT els reply payload
- */
-struct fc_ls_rjt_s {
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 reason_code:8; /* Reason code for reject */
- u32 reason_code_expl:8; /* Reason code explanation */
- u32 vendor_unique:8; /* Vendor specific */
-};
-
-/*
- * LS_RJT reason codes
- */
-enum {
- FC_LS_RJT_RSN_INV_CMD_CODE = 0x01,
- FC_LS_RJT_RSN_LOGICAL_ERROR = 0x03,
- FC_LS_RJT_RSN_LOGICAL_BUSY = 0x05,
- FC_LS_RJT_RSN_PROTOCOL_ERROR = 0x07,
- FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD = 0x09,
- FC_LS_RJT_RSN_CMD_NOT_SUPP = 0x0B,
-};
-
-/*
- * LS_RJT reason code explanation
- */
-enum {
- FC_LS_RJT_EXP_NO_ADDL_INFO = 0x00,
- FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS = 0x01,
- FC_LS_RJT_EXP_SPARMS_ERR_INI_CTL = 0x03,
- FC_LS_RJT_EXP_SPARMS_ERR_REC_CTL = 0x05,
- FC_LS_RJT_EXP_SPARMS_ERR_RXSZ = 0x07,
- FC_LS_RJT_EXP_SPARMS_ERR_CONSEQ = 0x09,
- FC_LS_RJT_EXP_SPARMS_ERR_CREDIT = 0x0B,
- FC_LS_RJT_EXP_INV_PORT_NAME = 0x0D,
- FC_LS_RJT_EXP_INV_NODE_FABRIC_NAME = 0x0E,
- FC_LS_RJT_EXP_INV_CSP = 0x0F,
- FC_LS_RJT_EXP_INV_ASSOC_HDR = 0x11,
- FC_LS_RJT_EXP_ASSOC_HDR_REQD = 0x13,
- FC_LS_RJT_EXP_INV_ORIG_S_ID = 0x15,
- FC_LS_RJT_EXP_INV_OXID_RXID_COMB = 0x17,
- FC_LS_RJT_EXP_CMD_ALREADY_IN_PROG = 0x19,
- FC_LS_RJT_EXP_LOGIN_REQUIRED = 0x1E,
- FC_LS_RJT_EXP_INVALID_NPORT_ID = 0x1F,
- FC_LS_RJT_EXP_INSUFF_RES = 0x29,
- FC_LS_RJT_EXP_CMD_NOT_SUPP = 0x2C,
- FC_LS_RJT_EXP_INV_PAYLOAD_LEN = 0x2D,
-};
-
-/*
- * RRQ els command payload
- */
-struct fc_rrq_s{
- struct fc_els_cmd_s els_cmd; /* ELS command code */
- u32 res1:8;
- u32 s_id:24; /* exchange originator S_ID */
-
- u32 ox_id:16; /* originator exchange ID */
- u32 rx_id:16; /* responder exchange ID */
-
- u32 res2[8]; /* optional association header */
-};
-
-/*
- * ABTS BA_ACC reply payload
- */
-struct fc_ba_acc_s{
- u32 seq_id_valid:8; /* set to 0x00 for Abort Exchange */
- u32 seq_id:8; /* invalid for Abort Exchange */
- u32 res2:16;
- u32 ox_id:16; /* OX_ID from ABTS frame */
- u32 rx_id:16; /* RX_ID from ABTS frame */
- u32 low_seq_cnt:16; /* set to 0x0000 for Abort Exchange */
- u32 high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
-};
-
-/*
- * ABTS BA_RJT reject payload
- */
-struct fc_ba_rjt_s{
- u32 res1:8; /* Reserved */
- u32 reason_code:8; /* reason code for reject */
- u32 reason_expl:8; /* reason code explanation */
- u32 vendor_unique:8;/* vendor unique reason code,set to 0 */
-};
-
-/*
- * TPRLO logout parameter page
- */
-struct fc_tprlo_params_page_s{
- u32 type:8;
- u32 type_ext:8;
-
-#ifdef __BIGENDIAN
- u32 opa_valid:1;
- u32 rpa_valid:1;
- u32 tpo_nport_valid:1;
- u32 global_process_logout:1;
- u32 res1:12;
-#else
- u32 res1:12;
- u32 global_process_logout:1;
- u32 tpo_nport_valid:1;
- u32 rpa_valid:1;
- u32 opa_valid:1;
-#endif
-
- u32 orig_process_assc;
- u32 resp_process_assc;
-
- u32 res2:8;
- u32 tpo_nport_id;
-};
-
-/*
- * TPRLO ELS command payload
- */
-struct fc_tprlo_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
-
- struct fc_tprlo_params_page_s tprlo_params[1];
-};
-
-enum fc_tprlo_type{
- FC_GLOBAL_LOGO = 1,
- FC_TPR_LOGO
-};
-
-/*
- * TPRLO els command ACC payload
- */
-struct fc_tprlo_acc_s{
- u32 command:8;
- u32 page_len:8;
- u32 payload_len:16;
- struct fc_prlo_acc_params_page_s tprlo_acc_params[1];
-};
-
-/*
- * RSCN els command req payload
- */
-#define FC_RSCN_PGLEN 0x4
-
-enum fc_rscn_format{
- FC_RSCN_FORMAT_PORTID = 0x0,
- FC_RSCN_FORMAT_AREA = 0x1,
- FC_RSCN_FORMAT_DOMAIN = 0x2,
- FC_RSCN_FORMAT_FABRIC = 0x3,
-};
-
-struct fc_rscn_event_s{
- u32 format:2;
- u32 qualifier:4;
- u32 resvd:2;
- u32 portid:24;
-};
-
-struct fc_rscn_pl_s{
- u8 command;
- u8 pagelen;
- u16 payldlen;
- struct fc_rscn_event_s event[1];
-};
-
-/*
- * ECHO els command req payload
- */
-struct fc_echo_s {
- struct fc_els_cmd_s els_cmd;
-};
-
-/*
- * RNID els command
- */
-
-#define RNID_NODEID_DATA_FORMAT_COMMON 0x00
-#define RNID_NODEID_DATA_FORMAT_FCP3 0x08
-#define RNID_NODEID_DATA_FORMAT_DISCOVERY 0xDF
-
-#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
-#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
-#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
-#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
-#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
-#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
-#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
-#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
-#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
-#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
-#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
-#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
-#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
-
-/*
- * RNID els command payload
- */
-struct fc_rnid_cmd_s{
- struct fc_els_cmd_s els_cmd;
- u32 node_id_data_format:8;
- u32 reserved:24;
-};
-
-/*
- * RNID els response payload
- */
-
-struct fc_rnid_common_id_data_s{
- wwn_t port_name;
- wwn_t node_name;
-};
-
-struct fc_rnid_general_topology_data_s{
- u32 vendor_unique[4];
- u32 asso_type;
- u32 phy_port_num;
- u32 num_attached_nodes;
- u32 node_mgmt:8;
- u32 ip_version:8;
- u32 udp_tcp_port_num:16;
- u32 ip_address[4];
- u32 reserved:16;
- u32 vendor_specific:16;
-};
-
-struct fc_rnid_acc_s{
- struct fc_els_cmd_s els_cmd;
- u32 node_id_data_format:8;
- u32 common_id_data_length:8;
- u32 reserved:8;
- u32 specific_id_data_length:8;
- struct fc_rnid_common_id_data_s common_id_data;
- struct fc_rnid_general_topology_data_s gen_topology_data;
-};
-
-#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
-#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
-#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
-#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
-#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
-#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
-#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
-#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
-#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
-#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
-#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
-#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
-#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
-
-enum fc_rpsc_speed_cap{
- RPSC_SPEED_CAP_1G = 0x8000,
- RPSC_SPEED_CAP_2G = 0x4000,
- RPSC_SPEED_CAP_4G = 0x2000,
- RPSC_SPEED_CAP_10G = 0x1000,
- RPSC_SPEED_CAP_8G = 0x0800,
- RPSC_SPEED_CAP_16G = 0x0400,
-
- RPSC_SPEED_CAP_UNKNOWN = 0x0001,
-};
-
-enum fc_rpsc_op_speed_s{
- RPSC_OP_SPEED_1G = 0x8000,
- RPSC_OP_SPEED_2G = 0x4000,
- RPSC_OP_SPEED_4G = 0x2000,
- RPSC_OP_SPEED_10G = 0x1000,
- RPSC_OP_SPEED_8G = 0x0800,
- RPSC_OP_SPEED_16G = 0x0400,
-
- RPSC_OP_SPEED_NOT_EST = 0x0001, /*! speed not established */
-};
-
-struct fc_rpsc_speed_info_s{
- u16 port_speed_cap; /*! see fc_rpsc_speed_cap_t */
- u16 port_op_speed; /*! see fc_rpsc_op_speed_t */
-};
-
-enum link_e2e_beacon_subcmd{
- LINK_E2E_BEACON_ON = 1,
- LINK_E2E_BEACON_OFF = 2
-};
-
-enum beacon_type{
- BEACON_TYPE_NORMAL = 1, /*! Normal Beaconing. Green */
- BEACON_TYPE_WARN = 2, /*! Warning Beaconing. Yellow/Amber */
- BEACON_TYPE_CRITICAL = 3 /*! Critical Beaconing. Red */
-};
-
-struct link_e2e_beacon_param_s {
- u8 beacon_type; /* Beacon Type. See beacon_type_t */
- u8 beacon_frequency;
- /* Beacon frequency. Number of blinks
- * per 10 seconds
- */
- u16 beacon_duration;/* Beacon duration (in Seconds). The
- * command operation should be
- * terminated at the end of this
- * timeout value.
- *
- * Ignored if diag_sub_cmd is
- * LINK_E2E_BEACON_OFF.
- *
- * If 0, beaconing will continue till a
- * BEACON OFF request is received
- */
-};
-
-/*
- * Link E2E beacon request/good response format. For LS_RJTs use fc_ls_rjt_t
- */
-struct link_e2e_beacon_req_s{
- u32 ls_code; /*! FC_ELS_E2E_LBEACON in requests *
- *or FC_ELS_ACC in good replies */
- u32 ls_sub_cmd; /*! See link_e2e_beacon_subcmd_t */
- struct link_e2e_beacon_param_s beacon_parm;
-};
-
-/**
- * If RPSC request is sent to the Domain Controller, the request is for
- * all the ports within that domain (TODO - I don't think FOS implements
- * this...).
- */
-struct fc_rpsc_cmd_s{
- struct fc_els_cmd_s els_cmd;
-};
-
-/*
- * RPSC Acc
- */
-struct fc_rpsc_acc_s{
- u32 command:8;
- u32 rsvd:8;
- u32 num_entries:16;
-
- struct fc_rpsc_speed_info_s speed_info[1];
-};
-
-/**
- * If RPSC2 request is sent to the Domain Controller,
- */
-#define FC_BRCD_TOKEN 0x42524344
-
-struct fc_rpsc2_cmd_s{
- struct fc_els_cmd_s els_cmd;
- u32 token;
- u16 resvd;
- u16 num_pids; /* Number of pids in the request */
- struct {
- u32 rsvd1:8;
- u32 pid:24; /* port identifier */
- } pid_list[1];
-};
-
-enum fc_rpsc2_port_type{
- RPSC2_PORT_TYPE_UNKNOWN = 0,
- RPSC2_PORT_TYPE_NPORT = 1,
- RPSC2_PORT_TYPE_NLPORT = 2,
- RPSC2_PORT_TYPE_NPIV_PORT = 0x5f,
- RPSC2_PORT_TYPE_NPORT_TRUNK = 0x6f,
-};
-
-/*
- * RPSC2 portInfo entry structure
- */
-struct fc_rpsc2_port_info_s{
- u32 pid; /* PID */
- u16 resvd1;
- u16 index; /* port number / index */
- u8 resvd2;
- u8 type; /* port type N/NL/... */
- u16 speed; /* port Operating Speed */
-};
-
-/*
- * RPSC2 Accept payload
- */
-struct fc_rpsc2_acc_s{
- u8 els_cmd;
- u8 resvd;
- u16 num_pids; /* Number of pids in the request */
- struct fc_rpsc2_port_info_s port_info[1]; /* port information */
-};
-
-/**
- * bit fields so that multiple classes can be specified
- */
-enum fc_cos{
- FC_CLASS_2 = 0x04,
- FC_CLASS_3 = 0x08,
- FC_CLASS_2_3 = 0x0C,
-};
-
-/*
- * symbolic name
- */
-struct fc_symname_s{
- u8 symname[FC_SYMNAME_MAX];
-};
-
-struct fc_alpabm_s{
- u8 alpa_bm[FC_ALPA_MAX / 8];
-};
-
-/*
- * protocol default timeout values
- */
-#define FC_ED_TOV 2
-#define FC_REC_TOV (FC_ED_TOV + 1)
-#define FC_RA_TOV 10
-#define FC_ELS_TOV (2 * FC_RA_TOV)
-#define FC_FCCT_TOV (3 * FC_RA_TOV)
-
-/*
- * virtual fabric related defines
- */
-#define FC_VF_ID_NULL 0 /* must not be used as VF_ID */
-#define FC_VF_ID_MIN 1
-#define FC_VF_ID_MAX 0xEFF
-#define FC_VF_ID_CTL 0xFEF /* control VF_ID */
-
-/**
- * Virtual Fabric Tagging header format
- * @caution This is defined only in BIG ENDIAN format.
- */
-struct fc_vft_s{
- u32 r_ctl:8;
- u32 ver:2;
- u32 type:4;
- u32 res_a:2;
- u32 priority:3;
- u32 vf_id:12;
- u32 res_b:1;
- u32 hopct:8;
- u32 res_c:24;
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fc_sp.h b/drivers/scsi/bfa/include/protocol/fc_sp.h
deleted file mode 100644
index 55bb0b3..0000000
--- a/drivers/scsi/bfa/include/protocol/fc_sp.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FC_SP_H__
-#define __FC_SP_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-enum auth_els_flags{
- FC_AUTH_ELS_MORE_FRAGS_FLAG = 0x80, /*! bit-7. More Fragments
- * Follow
- */
- FC_AUTH_ELS_CONCAT_FLAG = 0x40, /*! bit-6. Concatenation Flag */
- FC_AUTH_ELS_SEQ_NUM_FLAG = 0x01 /*! bit-0. Sequence Number */
-};
-
-enum auth_msg_codes{
- FC_AUTH_MC_AUTH_RJT = 0x0A, /*! Auth Reject */
- FC_AUTH_MC_AUTH_NEG = 0x0B, /*! Auth Negotiate */
- FC_AUTH_MC_AUTH_DONE = 0x0C, /*! Auth Done */
-
- FC_AUTH_MC_DHCHAP_CHAL = 0x10, /*! DHCHAP Challenge */
- FC_AUTH_MC_DHCHAP_REPLY = 0x11, /*! DHCHAP Reply */
- FC_AUTH_MC_DHCHAP_SUCC = 0x12, /*! DHCHAP Success */
-
- FC_AUTH_MC_FCAP_REQ = 0x13, /*! FCAP Request */
- FC_AUTH_MC_FCAP_ACK = 0x14, /*! FCAP Acknowledge */
- FC_AUTH_MC_FCAP_CONF = 0x15, /*! FCAP Confirm */
-
- FC_AUTH_MC_FCPAP_INIT = 0x16, /*! FCPAP Init */
- FC_AUTH_MC_FCPAP_ACC = 0x17, /*! FCPAP Accept */
- FC_AUTH_MC_FCPAP_COMP = 0x18, /*! FCPAP Complete */
-
- FC_AUTH_MC_IKE_SA_INIT = 0x22, /*! IKE SA INIT */
- FC_AUTH_MC_IKE_SA_AUTH = 0x23, /*! IKE SA Auth */
- FC_AUTH_MC_IKE_CREATE_CHILD_SA = 0x24, /*! IKE Create Child SA */
- FC_AUTH_MC_IKE_INFO = 0x25, /*! IKE informational */
-};
-
-enum auth_proto_version{
- FC_AUTH_PROTO_VER_1 = 1, /*! Protocol Version 1 */
-};
-
-enum {
- FC_AUTH_ELS_COMMAND_CODE = 0x90,/*! Authentication ELS Command code */
- FC_AUTH_PROTO_PARAM_LEN_SZ = 4, /*! Size of Proto Parameter Len Field */
- FC_AUTH_PROTO_PARAM_VAL_SZ = 4, /*! Size of Proto Parameter Val Field */
- FC_MAX_AUTH_SECRET_LEN = 256,
- /*! Maximum secret string length */
- FC_AUTH_NUM_USABLE_PROTO_LEN_SZ = 4,
- /*! Size of usable protocols field */
- FC_AUTH_RESP_VALUE_LEN_SZ = 4,
- /*! Size of response value length */
- FC_MAX_CHAP_KEY_LEN = 256, /*! Maximum md5 digest length */
- FC_MAX_AUTH_RETRIES = 3, /*! Maximum number of retries */
- FC_MD5_DIGEST_LEN = 16, /*! MD5 digest length */
- FC_SHA1_DIGEST_LEN = 20, /*! SHA1 digest length */
- FC_MAX_DHG_SUPPORTED = 1, /*! Maximum DH Groups supported */
- FC_MAX_ALG_SUPPORTED = 1, /*! Maximum algorithms supported */
- FC_MAX_PROTO_SUPPORTED = 1, /*! Maximum protocols supported */
- FC_START_TXN_ID = 2, /*! Starting transaction ID */
-};
-
-enum auth_proto_id{
- FC_AUTH_PROTO_DHCHAP = 0x00000001,
- FC_AUTH_PROTO_FCAP = 0x00000002,
- FC_AUTH_PROTO_FCPAP = 0x00000003,
- FC_AUTH_PROTO_IKEv2 = 0x00000004,
- FC_AUTH_PROTO_IKEv2_AUTH = 0x00000005,
-};
-
-struct auth_name_s{
- u16 name_tag; /*! Name Tag = 1 for Authentication */
- u16 name_len; /*! Name Length = 8 for Authentication
- */
- wwn_t name; /*! Name. TODO - is this PWWN */
-};
-
-
-enum auth_hash_func{
- FC_AUTH_HASH_FUNC_MD5 = 0x00000005,
- FC_AUTH_HASH_FUNC_SHA_1 = 0x00000006,
-};
-
-enum auth_dh_gid{
- FC_AUTH_DH_GID_0_DHG_NULL = 0x00000000,
- FC_AUTH_DH_GID_1_DHG_1024 = 0x00000001,
- FC_AUTH_DH_GID_2_DHG_1280 = 0x00000002,
- FC_AUTH_DH_GID_3_DHG_1536 = 0x00000003,
- FC_AUTH_DH_GID_4_DHG_2048 = 0x00000004,
- FC_AUTH_DH_GID_6_DHG_3072 = 0x00000006,
- FC_AUTH_DH_GID_7_DHG_4096 = 0x00000007,
- FC_AUTH_DH_GID_8_DHG_6144 = 0x00000008,
- FC_AUTH_DH_GID_9_DHG_8192 = 0x00000009,
-};
-
-struct auth_els_msg_s {
- u8 auth_els_code; /* Authentication ELS Code (0x90) */
- u8 auth_els_flag; /* Authentication ELS Flags */
- u8 auth_msg_code; /* Authentication Message Code */
- u8 proto_version; /* Protocol Version */
- u32 msg_len; /* Message Length */
- u32 trans_id; /* Transaction Identifier (T_ID) */
-
- /* Msg payload follows... */
-};
-
-
-enum auth_neg_param_tags {
- FC_AUTH_NEG_DHCHAP_HASHLIST = 0x0001,
- FC_AUTH_NEG_DHCHAP_DHG_ID_LIST = 0x0002,
-};
-
-
-struct dhchap_param_format_s {
- u16 tag; /*! Parameter Tag. See
- * auth_neg_param_tags_t
- */
- u16 word_cnt;
-
- /* followed by variable length parameter value... */
-};
-
-struct auth_proto_params_s {
- u32 proto_param_len;
- u32 proto_id;
-
- /*
- * Followed by variable length Protocol specific parameters. DH-CHAP
- * uses dhchap_param_format_t
- */
-};
-
-struct auth_neg_msg_s {
- struct auth_name_s auth_ini_name;
- u32 usable_auth_protos;
- struct auth_proto_params_s proto_params[1]; /*! (1..usable_auth_proto)
- * protocol params
- */
-};
-
-struct auth_dh_val_s {
- u32 dh_val_len;
- u32 dh_val[1];
-};
-
-struct auth_dhchap_chal_msg_s {
- struct auth_els_msg_s hdr;
- struct auth_name_s auth_responder_name; /* TODO VRK - is auth_name_t
- * type OK?
- */
- u32 hash_id;
- u32 dh_grp_id;
- u32 chal_val_len;
- char chal_val[1];
-
- /* ...followed by variable Challenge length/value and DH length/value */
-};
-
-
-enum auth_rjt_codes {
- FC_AUTH_RJT_CODE_AUTH_FAILURE = 0x01,
- FC_AUTH_RJT_CODE_LOGICAL_ERR = 0x02,
-};
-
-enum auth_rjt_code_exps {
- FC_AUTH_CEXP_AUTH_MECH_NOT_USABLE = 0x01,
- FC_AUTH_CEXP_DH_GROUP_NOT_USABLE = 0x02,
- FC_AUTH_CEXP_HASH_FUNC_NOT_USABLE = 0x03,
- FC_AUTH_CEXP_AUTH_XACT_STARTED = 0x04,
- FC_AUTH_CEXP_AUTH_FAILED = 0x05,
- FC_AUTH_CEXP_INCORRECT_PLD = 0x06,
- FC_AUTH_CEXP_INCORRECT_PROTO_MSG = 0x07,
- FC_AUTH_CEXP_RESTART_AUTH_PROTO = 0x08,
- FC_AUTH_CEXP_AUTH_CONCAT_NOT_SUPP = 0x09,
- FC_AUTH_CEXP_PROTO_VER_NOT_SUPP = 0x0A,
-};
-
-enum auth_status {
- FC_AUTH_STATE_INPROGRESS = 0, /*! authentication in progress */
- FC_AUTH_STATE_FAILED = 1, /*! authentication failed */
- FC_AUTH_STATE_SUCCESS = 2 /*! authentication successful */
-};
-
-struct auth_rjt_msg_s {
- struct auth_els_msg_s hdr;
- u8 reason_code;
- u8 reason_code_exp;
- u8 rsvd[2];
-};
-
-
-struct auth_dhchap_neg_msg_s {
- struct auth_els_msg_s hdr;
- struct auth_neg_msg_s nego;
-};
-
-struct auth_dhchap_reply_msg_s {
- struct auth_els_msg_s hdr;
-
- /*
- * followed by response value length & Value + DH Value Length & Value
- */
-};
-
-#pragma pack()
-
-#endif /* __FC_SP_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/fcp.h b/drivers/scsi/bfa/include/protocol/fcp.h
deleted file mode 100644
index 74ea63c..0000000
--- a/drivers/scsi/bfa/include/protocol/fcp.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FCPPROTO_H__
-#define __FCPPROTO_H__
-
-#include <linux/bitops.h>
-#include <protocol/scsi.h>
-
-#pragma pack(1)
-
-enum {
- FCP_RJT = 0x01000000, /* SRR reject */
- FCP_SRR_ACCEPT = 0x02000000, /* SRR accept */
- FCP_SRR = 0x14000000, /* Sequence Retransmission Request */
-};
-
-/*
- * SRR FC-4 LS payload
- */
-struct fc_srr_s{
- u32 ls_cmd;
- u32 ox_id:16; /* ox-id */
- u32 rx_id:16; /* rx-id */
- u32 ro; /* relative offset */
- u32 r_ctl:8; /* R_CTL for I.U. */
- u32 res:24;
-};
-
-
-/*
- * FCP_CMND definitions
- */
-#define FCP_CMND_CDB_LEN 16
-#define FCP_CMND_LUN_LEN 8
-
-struct fcp_cmnd_s{
- lun_t lun; /* 64-bit LU number */
- u8 crn; /* command reference number */
-#ifdef __BIGENDIAN
- u8 resvd:1,
- priority:4, /* FCP-3: SAM-3 priority */
- taskattr:3; /* scsi task attribute */
-#else
- u8 taskattr:3, /* scsi task attribute */
- priority:4, /* FCP-3: SAM-3 priority */
- resvd:1;
-#endif
- u8 tm_flags; /* task management flags */
-#ifdef __BIGENDIAN
- u8 addl_cdb_len:6, /* additional CDB length words */
- iodir:2; /* read/write FCP_DATA IUs */
-#else
- u8 iodir:2, /* read/write FCP_DATA IUs */
- addl_cdb_len:6; /* additional CDB length */
-#endif
- struct scsi_cdb_s cdb;
-
- /*
- * !!! additional cdb bytes follows here!!!
- */
- u32 fcp_dl; /* bytes to be transferred */
-};
-
-#define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
-#define fcp_cmnd_fcpdl(_cmnd) ((&(_cmnd)->fcp_dl)[(_cmnd)->addl_cdb_len])
-
-/*
- * fcp_cmnd_t.iodir field values
- */
-enum fcp_iodir{
- FCP_IODIR_NONE = 0,
- FCP_IODIR_WRITE = 1,
- FCP_IODIR_READ = 2,
- FCP_IODIR_RW = 3,
-};
-
-/*
- * Task attribute field
- */
-enum {
- FCP_TASK_ATTR_SIMPLE = 0,
- FCP_TASK_ATTR_HOQ = 1,
- FCP_TASK_ATTR_ORDERED = 2,
- FCP_TASK_ATTR_ACA = 4,
- FCP_TASK_ATTR_UNTAGGED = 5, /* obsolete in FCP-3 */
-};
-
-/*
- * Task management flags field - only one bit shall be set
- */
-enum fcp_tm_cmnd{
- FCP_TM_ABORT_TASK_SET = BIT(1),
- FCP_TM_CLEAR_TASK_SET = BIT(2),
- FCP_TM_LUN_RESET = BIT(4),
- FCP_TM_TARGET_RESET = BIT(5), /* obsolete in FCP-3 */
- FCP_TM_CLEAR_ACA = BIT(6),
-};
-
-/*
- * FCP_XFER_RDY IU defines
- */
-struct fcp_xfer_rdy_s{
- u32 data_ro;
- u32 burst_len;
- u32 reserved;
-};
-
-/*
- * FCP_RSP residue flags
- */
-enum fcp_residue{
- FCP_NO_RESIDUE = 0, /* no residue */
- FCP_RESID_OVER = 1, /* more data left that was not sent */
- FCP_RESID_UNDER = 2, /* less data than requested */
-};
-
-enum {
- FCP_RSPINFO_GOOD = 0,
- FCP_RSPINFO_DATALEN_MISMATCH = 1,
- FCP_RSPINFO_CMND_INVALID = 2,
- FCP_RSPINFO_ROLEN_MISMATCH = 3,
- FCP_RSPINFO_TM_NOT_SUPP = 4,
- FCP_RSPINFO_TM_FAILED = 5,
-};
-
-struct fcp_rspinfo_s{
- u32 res0:24;
- u32 rsp_code:8; /* response code (as above) */
- u32 res1;
-};
-
-struct fcp_resp_s{
- u32 reserved[2]; /* 2 words reserved */
- u16 reserved2;
-#ifdef __BIGENDIAN
- u8 reserved3:3;
- u8 fcp_conf_req:1; /* FCP_CONF is requested */
- u8 resid_flags:2; /* underflow/overflow */
- u8 sns_len_valid:1;/* sense len is valid */
- u8 rsp_len_valid:1;/* response len is valid */
-#else
- u8 rsp_len_valid:1;/* response len is valid */
- u8 sns_len_valid:1;/* sense len is valid */
- u8 resid_flags:2; /* underflow/overflow */
- u8 fcp_conf_req:1; /* FCP_CONF is requested */
- u8 reserved3:3;
-#endif
- u8 scsi_status; /* one byte SCSI status */
- u32 residue; /* residual data bytes */
- u32 sns_len; /* length od sense info */
- u32 rsp_len; /* length of response info */
-};
-
-#define fcp_snslen(__fcprsp) ((__fcprsp)->sns_len_valid ? \
- (__fcprsp)->sns_len : 0)
-#define fcp_rsplen(__fcprsp) ((__fcprsp)->rsp_len_valid ? \
- (__fcprsp)->rsp_len : 0)
-#define fcp_rspinfo(__fcprsp) ((struct fcp_rspinfo_s *)((__fcprsp) + 1))
-#define fcp_snsinfo(__fcprsp) (((u8 *)fcp_rspinfo(__fcprsp)) + \
- fcp_rsplen(__fcprsp))
-
-struct fcp_cmnd_fr_s{
- struct fchs_s fchs;
- struct fcp_cmnd_s fcp;
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/fdmi.h b/drivers/scsi/bfa/include/protocol/fdmi.h
deleted file mode 100644
index 6c05c26..0000000
--- a/drivers/scsi/bfa/include/protocol/fdmi.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __FDMI_H__
-#define __FDMI_H__
-
-#include <protocol/types.h>
-#include <protocol/fc.h>
-#include <protocol/ct.h>
-
-#pragma pack(1)
-
-/*
- * FDMI Command Codes
- */
-#define FDMI_GRHL 0x0100
-#define FDMI_GHAT 0x0101
-#define FDMI_GRPL 0x0102
-#define FDMI_GPAT 0x0110
-#define FDMI_RHBA 0x0200
-#define FDMI_RHAT 0x0201
-#define FDMI_RPRT 0x0210
-#define FDMI_RPA 0x0211
-#define FDMI_DHBA 0x0300
-#define FDMI_DPRT 0x0310
-
-/*
- * FDMI reason codes
- */
-#define FDMI_NO_ADDITIONAL_EXP 0x00
-#define FDMI_HBA_ALREADY_REG 0x10
-#define FDMI_HBA_ATTRIB_NOT_REG 0x11
-#define FDMI_HBA_ATTRIB_MULTIPLE 0x12
-#define FDMI_HBA_ATTRIB_LENGTH_INVALID 0x13
-#define FDMI_HBA_ATTRIB_NOT_PRESENT 0x14
-#define FDMI_PORT_ORIG_NOT_IN_LIST 0x15
-#define FDMI_PORT_HBA_NOT_IN_LIST 0x16
-#define FDMI_PORT_ATTRIB_NOT_REG 0x20
-#define FDMI_PORT_NOT_REG 0x21
-#define FDMI_PORT_ATTRIB_MULTIPLE 0x22
-#define FDMI_PORT_ATTRIB_LENGTH_INVALID 0x23
-#define FDMI_PORT_ALREADY_REGISTEREED 0x24
-
-/*
- * FDMI Transmission Speed Mask values
- */
-#define FDMI_TRANS_SPEED_1G 0x00000001
-#define FDMI_TRANS_SPEED_2G 0x00000002
-#define FDMI_TRANS_SPEED_10G 0x00000004
-#define FDMI_TRANS_SPEED_4G 0x00000008
-#define FDMI_TRANS_SPEED_8G 0x00000010
-#define FDMI_TRANS_SPEED_16G 0x00000020
-#define FDMI_TRANS_SPEED_UNKNOWN 0x00008000
-
-/*
- * FDMI HBA attribute types
- */
-enum fdmi_hba_attribute_type {
- FDMI_HBA_ATTRIB_NODENAME = 1, /* 0x0001 */
- FDMI_HBA_ATTRIB_MANUFACTURER, /* 0x0002 */
- FDMI_HBA_ATTRIB_SERIALNUM, /* 0x0003 */
- FDMI_HBA_ATTRIB_MODEL, /* 0x0004 */
- FDMI_HBA_ATTRIB_MODEL_DESC, /* 0x0005 */
- FDMI_HBA_ATTRIB_HW_VERSION, /* 0x0006 */
- FDMI_HBA_ATTRIB_DRIVER_VERSION, /* 0x0007 */
- FDMI_HBA_ATTRIB_ROM_VERSION, /* 0x0008 */
- FDMI_HBA_ATTRIB_FW_VERSION, /* 0x0009 */
- FDMI_HBA_ATTRIB_OS_NAME, /* 0x000A */
- FDMI_HBA_ATTRIB_MAX_CT, /* 0x000B */
-
- FDMI_HBA_ATTRIB_MAX_TYPE
-};
-
-/*
- * FDMI Port attribute types
- */
-enum fdmi_port_attribute_type {
- FDMI_PORT_ATTRIB_FC4_TYPES = 1, /* 0x0001 */
- FDMI_PORT_ATTRIB_SUPP_SPEED, /* 0x0002 */
- FDMI_PORT_ATTRIB_PORT_SPEED, /* 0x0003 */
- FDMI_PORT_ATTRIB_FRAME_SIZE, /* 0x0004 */
- FDMI_PORT_ATTRIB_DEV_NAME, /* 0x0005 */
- FDMI_PORT_ATTRIB_HOST_NAME, /* 0x0006 */
-
- FDMI_PORT_ATTR_MAX_TYPE
-};
-
-/*
- * FDMI attribute
- */
-struct fdmi_attr_s {
- u16 type;
- u16 len;
- u8 value[1];
-};
-
-/*
- * HBA Attribute Block
- */
-struct fdmi_hba_attr_s {
- u32 attr_count; /* # of attributes */
- struct fdmi_attr_s hba_attr; /* n attributes */
-};
-
-/*
- * Registered Port List
- */
-struct fdmi_port_list_s {
- u32 num_ports; /* number Of Port Entries */
- wwn_t port_entry; /* one or more */
-};
-
-/*
- * Port Attribute Block
- */
-struct fdmi_port_attr_s {
- u32 attr_count; /* # of attributes */
- struct fdmi_attr_s port_attr; /* n attributes */
-};
-
-/*
- * FDMI Register HBA Attributes
- */
-struct fdmi_rhba_s {
- wwn_t hba_id; /* HBA Identifier */
- struct fdmi_port_list_s port_list; /* Registered Port List */
- struct fdmi_hba_attr_s hba_attr_blk; /* HBA attribute block */
-};
-
-/*
- * FDMI Register Port
- */
-struct fdmi_rprt_s {
- wwn_t hba_id; /* HBA Identifier */
- wwn_t port_name; /* Port wwn */
- struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
-};
-
-/*
- * FDMI Register Port Attributes
- */
-struct fdmi_rpa_s {
- wwn_t port_name; /* port wwn */
- struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
-};
-
-#pragma pack()
-
-#endif
diff --git a/drivers/scsi/bfa/include/protocol/scsi.h b/drivers/scsi/bfa/include/protocol/scsi.h
deleted file mode 100644
index b220e6b..0000000
--- a/drivers/scsi/bfa/include/protocol/scsi.h
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef __SCSI_H__
-#define __SCSI_H__
-
-#include <protocol/types.h>
-
-#pragma pack(1)
-
-/*
- * generic SCSI cdb definition
- */
-#define SCSI_MAX_CDBLEN 16
-struct scsi_cdb_s{
- u8 scsi_cdb[SCSI_MAX_CDBLEN];
-};
-
-/*
- * scsi lun serial number definition
- */
-#define SCSI_LUN_SN_LEN 32
-struct scsi_lun_sn_s{
- u8 lun_sn[SCSI_LUN_SN_LEN];
-};
-
-/*
- * SCSI Direct Access Commands
- */
-enum {
- SCSI_OP_TEST_UNIT_READY = 0x00,
- SCSI_OP_REQUEST_SENSE = 0x03,
- SCSI_OP_FORMAT_UNIT = 0x04,
- SCSI_OP_READ6 = 0x08,
- SCSI_OP_WRITE6 = 0x0A,
- SCSI_OP_WRITE_FILEMARKS = 0x10,
- SCSI_OP_INQUIRY = 0x12,
- SCSI_OP_MODE_SELECT6 = 0x15,
- SCSI_OP_RESERVE6 = 0x16,
- SCSI_OP_RELEASE6 = 0x17,
- SCSI_OP_MODE_SENSE6 = 0x1A,
- SCSI_OP_START_STOP_UNIT = 0x1B,
- SCSI_OP_SEND_DIAGNOSTIC = 0x1D,
- SCSI_OP_READ_CAPACITY = 0x25,
- SCSI_OP_READ10 = 0x28,
- SCSI_OP_WRITE10 = 0x2A,
- SCSI_OP_VERIFY10 = 0x2F,
- SCSI_OP_READ_DEFECT_DATA = 0x37,
- SCSI_OP_LOG_SELECT = 0x4C,
- SCSI_OP_LOG_SENSE = 0x4D,
- SCSI_OP_MODE_SELECT10 = 0x55,
- SCSI_OP_RESERVE10 = 0x56,
- SCSI_OP_RELEASE10 = 0x57,
- SCSI_OP_MODE_SENSE10 = 0x5A,
- SCSI_OP_PER_RESERVE_IN = 0x5E,
- SCSI_OP_PER_RESERVE_OUR = 0x5E,
- SCSI_OP_READ16 = 0x88,
- SCSI_OP_WRITE16 = 0x8A,
- SCSI_OP_VERIFY16 = 0x8F,
- SCSI_OP_READ_CAPACITY16 = 0x9E,
- SCSI_OP_REPORT_LUNS = 0xA0,
- SCSI_OP_READ12 = 0xA8,
- SCSI_OP_WRITE12 = 0xAA,
- SCSI_OP_UNDEF = 0xFF,
-};
-
-/*
- * SCSI START_STOP_UNIT command
- */
-struct scsi_start_stop_unit_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:4;
- u8 immed:1;
-#else
- u8 immed:1;
- u8 reserved1:4;
- u8 lun:3;
-#endif
- u8 reserved2;
- u8 reserved3;
-#ifdef __BIGENDIAN
- u8 power_conditions:4;
- u8 reserved4:2;
- u8 loEj:1;
- u8 start:1;
-#else
- u8 start:1;
- u8 loEj:1;
- u8 reserved4:2;
- u8 power_conditions:4;
-#endif
- u8 control;
-};
-
-/*
- * SCSI SEND_DIAGNOSTIC command
- */
-struct scsi_send_diagnostic_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 self_test_code:3;
- u8 pf:1;
- u8 reserved1:1;
- u8 self_test:1;
- u8 dev_offl:1;
- u8 unit_offl:1;
-#else
- u8 unit_offl:1;
- u8 dev_offl:1;
- u8 self_test:1;
- u8 reserved1:1;
- u8 pf:1;
- u8 self_test_code:3;
-#endif
- u8 reserved2;
-
- u8 param_list_length[2]; /* MSB first */
- u8 control;
-
-};
-
-/*
- * SCSI READ10/WRITE10 commands
- */
-struct scsi_rw10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 dpo:1; /* Disable Page Out */
- u8 fua:1; /* Force Unit Access */
- u8 reserved1:2;
- u8 rel_adr:1; /* relative address */
-#else
- u8 rel_adr:1;
- u8 reserved1:2;
- u8 fua:1;
- u8 dpo:1;
- u8 lun:3;
-#endif
- u8 lba0; /* logical block address - MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved3;
- u8 xfer_length0; /* transfer length in blocks - MSB */
- u8 xfer_length1; /* LSB */
- u8 control;
-};
-
-#define SCSI_CDB10_GET_LBA(cdb) \
- (((cdb)->lba0 << 24) | ((cdb)->lba1 << 16) | \
- ((cdb)->lba2 << 8) | (cdb)->lba3)
-
-#define SCSI_CDB10_SET_LBA(cdb, lba) { \
- (cdb)->lba0 = lba >> 24; \
- (cdb)->lba1 = (lba >> 16) & 0xFF; \
- (cdb)->lba2 = (lba >> 8) & 0xFF; \
- (cdb)->lba3 = lba & 0xFF; \
-}
-
-#define SCSI_CDB10_GET_TL(cdb) \
- ((cdb)->xfer_length0 << 8 | (cdb)->xfer_length1)
-#define SCSI_CDB10_SET_TL(cdb, tl) { \
- (cdb)->xfer_length0 = tl >> 8; \
- (cdb)->xfer_length1 = tl & 0xFF; \
-}
-
-/*
- * SCSI READ6/WRITE6 commands
- */
-struct scsi_rw6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 lba0:5; /* MSb */
-#else
- u8 lba0:5; /* MSb */
- u8 lun:3;
-#endif
- u8 lba1;
- u8 lba2; /* LSB */
- u8 xfer_length;
- u8 control;
-};
-
-#define SCSI_TAPE_CDB6_GET_TL(cdb) \
- (((cdb)->tl0 << 16) | ((cdb)->tl1 << 8) | (cdb)->tl2)
-
-#define SCSI_TAPE_CDB6_SET_TL(cdb, tl) { \
- (cdb)->tl0 = tl >> 16; \
- (cdb)->tl1 = (tl >> 8) & 0xFF; \
- (cdb)->tl2 = tl & 0xFF; \
-}
-
-/*
- * SCSI sequential (TAPE) wrtie command
- */
-struct scsi_tape_wr_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 rsvd:7;
- u8 fixed:1; /* MSb */
-#else
- u8 fixed:1; /* MSb */
- u8 rsvd:7;
-#endif
- u8 tl0; /* Msb */
- u8 tl1;
- u8 tl2; /* Lsb */
-
- u8 control;
-};
-
-#define SCSI_CDB6_GET_LBA(cdb) \
- (((cdb)->lba0 << 16) | ((cdb)->lba1 << 8) | (cdb)->lba2)
-
-#define SCSI_CDB6_SET_LBA(cdb, lba) { \
- (cdb)->lba0 = lba >> 16; \
- (cdb)->lba1 = (lba >> 8) & 0xFF; \
- (cdb)->lba2 = lba & 0xFF; \
-}
-
-#define SCSI_CDB6_GET_TL(cdb) ((cdb)->xfer_length)
-#define SCSI_CDB6_SET_TL(cdb, tl) { \
- (cdb)->xfer_length = tl; \
-}
-
-/*
- * SCSI sense data format
- */
-struct scsi_sense_s{
-#ifdef __BIGENDIAN
- u8 valid:1;
- u8 rsp_code:7;
-#else
- u8 rsp_code:7;
- u8 valid:1;
-#endif
- u8 seg_num;
-#ifdef __BIGENDIAN
- u8 file_mark:1;
- u8 eom:1; /* end of media */
- u8 ili:1; /* incorrect length indicator */
- u8 reserved:1;
- u8 sense_key:4;
-#else
- u8 sense_key:4;
- u8 reserved:1;
- u8 ili:1; /* incorrect length indicator */
- u8 eom:1; /* end of media */
- u8 file_mark:1;
-#endif
- u8 information[4]; /* device-type or command specific info
- */
- u8 add_sense_length;
- /* additional sense length */
- u8 command_info[4];/* command specific information
- */
- u8 asc; /* additional sense code */
- u8 ascq; /* additional sense code qualifier */
- u8 fru_code; /* field replaceable unit code */
-#ifdef __BIGENDIAN
- u8 sksv:1; /* sense key specific valid */
- u8 c_d:1; /* command/data bit */
- u8 res1:2;
- u8 bpv:1; /* bit pointer valid */
- u8 bpointer:3; /* bit pointer */
-#else
- u8 bpointer:3; /* bit pointer */
- u8 bpv:1; /* bit pointer valid */
- u8 res1:2;
- u8 c_d:1; /* command/data bit */
- u8 sksv:1; /* sense key specific valid */
-#endif
- u8 fpointer[2]; /* field pointer */
-};
-
-#define SCSI_SENSE_CUR_ERR 0x70
-#define SCSI_SENSE_DEF_ERR 0x71
-
-/*
- * SCSI sense key values
- */
-#define SCSI_SK_NO_SENSE 0x0
-#define SCSI_SK_REC_ERR 0x1 /* recovered error */
-#define SCSI_SK_NOT_READY 0x2
-#define SCSI_SK_MED_ERR 0x3 /* medium error */
-#define SCSI_SK_HW_ERR 0x4 /* hardware error */
-#define SCSI_SK_ILLEGAL_REQ 0x5
-#define SCSI_SK_UNIT_ATT 0x6 /* unit attention */
-#define SCSI_SK_DATA_PROTECT 0x7
-#define SCSI_SK_BLANK_CHECK 0x8
-#define SCSI_SK_VENDOR_SPEC 0x9
-#define SCSI_SK_COPY_ABORTED 0xA
-#define SCSI_SK_ABORTED_CMND 0xB
-#define SCSI_SK_VOL_OVERFLOW 0xD
-#define SCSI_SK_MISCOMPARE 0xE
-
-/*
- * SCSI additional sense codes
- */
-#define SCSI_ASC_NO_ADD_SENSE 0x00
-#define SCSI_ASC_LUN_NOT_READY 0x04
-#define SCSI_ASC_LUN_COMMUNICATION 0x08
-#define SCSI_ASC_WRITE_ERROR 0x0C
-#define SCSI_ASC_INVALID_CMND_CODE 0x20
-#define SCSI_ASC_BAD_LBA 0x21
-#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
-#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25
-#define SCSI_ASC_LUN_WRITE_PROTECT 0x27
-#define SCSI_ASC_POWERON_BDR 0x29 /* power on reset, bus reset,
- * bus device reset
- */
-#define SCSI_ASC_PARAMS_CHANGED 0x2A
-#define SCSI_ASC_CMND_CLEARED_BY_A_I 0x2F
-#define SCSI_ASC_SAVING_PARAM_NOTSUPP 0x39
-#define SCSI_ASC_TOCC 0x3F /* target operating condtions
- * changed
- */
-#define SCSI_ASC_PARITY_ERROR 0x47
-#define SCSI_ASC_CMND_PHASE_ERROR 0x4A
-#define SCSI_ASC_DATA_PHASE_ERROR 0x4B
-#define SCSI_ASC_VENDOR_SPEC 0x7F
-
-/*
- * SCSI additional sense code qualifiers
- */
-#define SCSI_ASCQ_CAUSE_NOT_REPORT 0x00
-#define SCSI_ASCQ_BECOMING_READY 0x01
-#define SCSI_ASCQ_INIT_CMD_REQ 0x02
-#define SCSI_ASCQ_FORMAT_IN_PROGRESS 0x04
-#define SCSI_ASCQ_OPERATION_IN_PROGRESS 0x07
-#define SCSI_ASCQ_SELF_TEST_IN_PROGRESS 0x09
-#define SCSI_ASCQ_WR_UNEXP_UNSOL_DATA 0x0C
-#define SCSI_ASCQ_WR_NOTENG_UNSOL_DATA 0x0D
-
-#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
-#define SCSI_ASCQ_INVALID_ELEMENT_ADDR 0x01
-
-#define SCSI_ASCQ_LUN_WRITE_PROTECTED 0x00
-#define SCSI_ASCQ_LUN_HW_WRITE_PROTECTED 0x01
-#define SCSI_ASCQ_LUN_SW_WRITE_PROTECTED 0x02
-
-#define SCSI_ASCQ_POR 0x01 /* power on reset */
-#define SCSI_ASCQ_SBR 0x02 /* scsi bus reset */
-#define SCSI_ASCQ_BDR 0x03 /* bus device reset */
-#define SCSI_ASCQ_DIR 0x04 /* device internal reset */
-
-#define SCSI_ASCQ_MODE_PARAMS_CHANGED 0x01
-#define SCSI_ASCQ_LOG_PARAMS_CHANGED 0x02
-#define SCSI_ASCQ_RESERVATIONS_PREEMPTED 0x03
-#define SCSI_ASCQ_RESERVATIONS_RELEASED 0x04
-#define SCSI_ASCQ_REGISTRATIONS_PREEMPTED 0x05
-
-#define SCSI_ASCQ_MICROCODE_CHANGED 0x01
-#define SCSI_ASCQ_CHANGED_OPER_COND 0x02
-#define SCSI_ASCQ_INQ_CHANGED 0x03 /* inquiry data changed */
-#define SCSI_ASCQ_DI_CHANGED 0x05 /* device id changed */
-#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */
-
-#define SCSI_ASCQ_DP_CRC_ERR 0x01 /* data phase crc error */
-#define SCSI_ASCQ_DP_SCSI_PARITY_ERR 0x02 /* data phase scsi parity error
- */
-#define SCSI_ASCQ_IU_CRC_ERR 0x03 /* information unit crc error */
-#define SCSI_ASCQ_PROTO_SERV_CRC_ERR 0x05
-
-#define SCSI_ASCQ_LUN_TIME_OUT 0x01
-
-/* ------------------------------------------------------------
- * SCSI INQUIRY
- * ------------------------------------------------------------*/
-
-struct scsi_inquiry_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:3;
- u8 cmd_dt:1;
- u8 evpd:1;
-#else
- u8 evpd:1;
- u8 cmd_dt:1;
- u8 reserved1:3;
- u8 lun:3;
-#endif
- u8 page_code;
- u8 reserved2;
- u8 alloc_length;
- u8 control;
-};
-
-struct scsi_inquiry_vendor_s{
- u8 vendor_id[8];
-};
-
-struct scsi_inquiry_prodid_s{
- u8 product_id[16];
-};
-
-struct scsi_inquiry_prodrev_s{
- u8 product_rev[4];
-};
-
-struct scsi_inquiry_data_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3; /* peripheral qualifier */
- u8 device_type:5; /* peripheral device type */
-
- u8 rmb:1; /* removable medium bit */
- u8 device_type_mod:7; /* device type modifier */
-
- u8 version;
-
- u8 aenc:1; /* async event notification capability
- */
- u8 trm_iop:1; /* terminate I/O process */
- u8 norm_aca:1; /* normal ACA supported */
- u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
- u8 rsp_data_format:4;
-
- u8 additional_len;
- u8 sccs:1;
- u8 reserved1:7;
-
- u8 reserved2:1;
- u8 enc_serv:1; /* enclosure service component */
- u8 reserved3:1;
- u8 multi_port:1; /* multi-port device */
- u8 m_chngr:1; /* device in medium transport element */
- u8 ack_req_q:1; /* SIP specific bit */
- u8 addr32:1; /* SIP specific bit */
- u8 addr16:1; /* SIP specific bit */
-
- u8 rel_adr:1; /* relative address */
- u8 w_bus32:1;
- u8 w_bus16:1;
- u8 synchronous:1;
- u8 linked_commands:1;
- u8 trans_dis:1;
- u8 cmd_queue:1; /* command queueing supported */
- u8 soft_reset:1; /* soft reset alternative (VS) */
-#else
- u8 device_type:5; /* peripheral device type */
- u8 peripheral_qual:3;
- /* peripheral qualifier */
-
- u8 device_type_mod:7;
- /* device type modifier */
- u8 rmb:1; /* removable medium bit */
-
- u8 version;
-
- u8 rsp_data_format:4;
- u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
- u8 norm_aca:1; /* normal ACA supported */
- u8 terminate_iop:1;/* terminate I/O process */
- u8 aenc:1; /* async event notification capability
- */
-
- u8 additional_len;
- u8 reserved1:7;
- u8 sccs:1;
-
- u8 addr16:1; /* SIP specific bit */
- u8 addr32:1; /* SIP specific bit */
- u8 ack_req_q:1; /* SIP specific bit */
- u8 m_chngr:1; /* device in medium transport element */
- u8 multi_port:1; /* multi-port device */
- u8 reserved3:1; /* TBD - Vendor Specific */
- u8 enc_serv:1; /* enclosure service component */
- u8 reserved2:1;
-
- u8 soft_seset:1; /* soft reset alternative (VS) */
- u8 cmd_queue:1; /* command queueing supported */
- u8 trans_dis:1;
- u8 linked_commands:1;
- u8 synchronous:1;
- u8 w_bus16:1;
- u8 w_bus32:1;
- u8 rel_adr:1; /* relative address */
-#endif
- struct scsi_inquiry_vendor_s vendor_id;
- struct scsi_inquiry_prodid_s product_id;
- struct scsi_inquiry_prodrev_s product_rev;
- u8 vendor_specific[20];
- u8 reserved4[40];
-};
-
-/*
- * inquiry.peripheral_qual field values
- */
-#define SCSI_DEVQUAL_DEFAULT 0
-#define SCSI_DEVQUAL_NOT_CONNECTED 1
-#define SCSI_DEVQUAL_NOT_SUPPORTED 3
-
-/*
- * inquiry.device_type field values
- */
-#define SCSI_DEVICE_DIRECT_ACCESS 0x00
-#define SCSI_DEVICE_SEQ_ACCESS 0x01
-#define SCSI_DEVICE_ARRAY_CONTROLLER 0x0C
-#define SCSI_DEVICE_UNKNOWN 0x1F
-
-/*
- * inquiry.version
- */
-#define SCSI_VERSION_ANSI_X3131 2 /* ANSI X3.131 SCSI-2 */
-#define SCSI_VERSION_SPC 3 /* SPC (SCSI-3), ANSI X3.301:1997 */
-#define SCSI_VERSION_SPC_2 4 /* SPC-2 */
-
-/*
- * response data format
- */
-#define SCSI_RSP_DATA_FORMAT 2 /* SCSI-2 & SPC */
-
-/*
- * SCSI inquiry page codes
- */
-#define SCSI_INQ_PAGE_VPD_PAGES 0x00 /* supported vpd pages */
-#define SCSI_INQ_PAGE_USN_PAGE 0x80 /* unit serial number page */
-#define SCSI_INQ_PAGE_DEV_IDENT 0x83 /* device indentification page
- */
-#define SCSI_INQ_PAGES_MAX 3
-
-/*
- * supported vital product data pages
- */
-struct scsi_inq_page_vpd_pages_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved;
- u8 page_length;
- u8 pages[SCSI_INQ_PAGES_MAX];
-};
-
-/*
- * Unit serial number page
- */
-#define SCSI_INQ_USN_LEN 32
-
-struct scsi_inq_usn_s{
- char usn[SCSI_INQ_USN_LEN];
-};
-
-struct scsi_inq_page_usn_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved1;
- u8 page_length;
- struct scsi_inq_usn_s usn;
-};
-
-enum {
- SCSI_INQ_DIP_CODE_BINARY = 1, /* identifier has binary value */
- SCSI_INQ_DIP_CODE_ASCII = 2, /* identifier has ascii value */
-};
-
-enum {
- SCSI_INQ_DIP_ASSOC_LUN = 0, /* id is associated with device */
- SCSI_INQ_DIP_ASSOC_PORT = 1, /* id is associated with port that
- * received the request
- */
-};
-
-enum {
- SCSI_INQ_ID_TYPE_VENDOR = 1,
- SCSI_INQ_ID_TYPE_IEEE = 2,
- SCSI_INQ_ID_TYPE_FC_FS = 3,
- SCSI_INQ_ID_TYPE_OTHER = 4,
-};
-
-struct scsi_inq_dip_desc_s{
-#ifdef __BIGENDIAN
- u8 res0:4;
- u8 code_set:4;
- u8 res1:2;
- u8 association:2;
- u8 id_type:4;
-#else
- u8 code_set:4;
- u8 res0:4;
- u8 id_type:4;
- u8 association:2;
- u8 res1:2;
-#endif
- u8 res2;
- u8 id_len;
- struct scsi_lun_sn_s id;
-};
-
-/*
- * Device indentification page
- */
-struct scsi_inq_page_dev_ident_s{
-#ifdef __BIGENDIAN
- u8 peripheral_qual:3;
- u8 device_type:5;
-#else
- u8 device_type:5;
- u8 peripheral_qual:3;
-#endif
- u8 page_code;
- u8 reserved1;
- u8 page_length;
- struct scsi_inq_dip_desc_s desc;
-};
-
-/* ------------------------------------------------------------
- * READ CAPACITY
- * ------------------------------------------------------------
- */
-
-struct scsi_read_capacity_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved1:4;
- u8 rel_adr:1;
-#else
- u8 rel_adr:1;
- u8 reserved1:4;
- u8 lun:3;
-#endif
- u8 lba0; /* MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved2;
- u8 reserved3;
-#ifdef __BIGENDIAN
- u8 reserved4:7;
- u8 pmi:1; /* partial medium indicator */
-#else
- u8 pmi:1; /* partial medium indicator */
- u8 reserved4:7;
-#endif
- u8 control;
-};
-
-struct scsi_read_capacity_data_s{
- u32 max_lba; /* maximum LBA available */
- u32 block_length; /* in bytes */
-};
-
-struct scsi_read_capacity16_data_s{
- u64 lba; /* maximum LBA available */
- u32 block_length; /* in bytes */
-#ifdef __BIGENDIAN
- u8 reserved1:4,
- p_type:3,
- prot_en:1;
- u8 reserved2:4,
- lb_pbe:4; /* logical blocks per physical block
- * exponent */
- u16 reserved3:2,
- lba_align:14; /* lowest aligned logical block
- * address */
-#else
- u16 lba_align:14, /* lowest aligned logical block
- * address */
- reserved3:2;
- u8 lb_pbe:4, /* logical blocks per physical block
- * exponent */
- reserved2:4;
- u8 prot_en:1,
- p_type:3,
- reserved1:4;
-#endif
- u64 reserved4;
- u64 reserved5;
-};
-
-/* ------------------------------------------------------------
- * REPORT LUNS command
- * ------------------------------------------------------------
- */
-
-struct scsi_report_luns_s{
- u8 opcode; /* A0h - REPORT LUNS opCode */
- u8 reserved1[5];
- u8 alloc_length[4];/* allocation length MSB first */
- u8 reserved2;
- u8 control;
-};
-
-#define SCSI_REPORT_LUN_ALLOC_LENGTH(rl) \
- ((rl->alloc_length[0] << 24) | (rl->alloc_length[1] << 16) | \
- (rl->alloc_length[2] << 8) | (rl->alloc_length[3]))
-
-#define SCSI_REPORT_LUNS_SET_ALLOCLEN(rl, alloc_len) { \
- (rl)->alloc_length[0] = (alloc_len) >> 24; \
- (rl)->alloc_length[1] = ((alloc_len) >> 16) & 0xFF; \
- (rl)->alloc_length[2] = ((alloc_len) >> 8) & 0xFF; \
- (rl)->alloc_length[3] = (alloc_len) & 0xFF; \
-}
-
-struct scsi_report_luns_data_s{
- u32 lun_list_length; /* length of LUN list length */
- u32 reserved;
- lun_t lun[1]; /* first LUN in lun list */
-};
-
-/* -------------------------------------------------------------
- * SCSI mode parameters
- * -----------------------------------------------------------
- */
-enum {
- SCSI_DA_MEDIUM_DEF = 0, /* direct access default medium type */
- SCSI_DA_MEDIUM_SS = 1, /* direct access single sided */
- SCSI_DA_MEDIUM_DS = 2, /* direct access double sided */
-};
-
-/*
- * SCSI Mode Select(6) cdb
- */
-struct scsi_mode_select6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 pf:1; /* page format */
- u8 reserved2:3;
- u8 sp:1; /* save pages if set to 1 */
-#else
- u8 sp:1; /* save pages if set to 1 */
- u8 reserved2:3;
- u8 pf:1; /* page format */
- u8 reserved1:3;
-#endif
- u8 reserved3[2];
- u8 alloc_len;
- u8 control;
-};
-
-/*
- * SCSI Mode Select(10) cdb
- */
-struct scsi_mode_select10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 pf:1; /* page format */
- u8 reserved2:3;
- u8 sp:1; /* save pages if set to 1 */
-#else
- u8 sp:1; /* save pages if set to 1 */
- u8 reserved2:3;
- u8 pf:1; /* page format */
- u8 reserved1:3;
-#endif
- u8 reserved3[5];
- u8 alloc_len_msb;
- u8 alloc_len_lsb;
- u8 control;
-};
-
-/*
- * SCSI Mode Sense(6) cdb
- */
-struct scsi_mode_sense6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:4;
- u8 dbd:1; /* disable block discriptors if set to 1 */
- u8 reserved2:3;
-
- u8 pc:2; /* page control */
- u8 page_code:6;
-#else
- u8 reserved2:3;
- u8 dbd:1; /* disable block descriptors if set to 1 */
- u8 reserved1:4;
-
- u8 page_code:6;
- u8 pc:2; /* page control */
-#endif
- u8 reserved3;
- u8 alloc_len;
- u8 control;
-};
-
-/*
- * SCSI Mode Sense(10) cdb
- */
-struct scsi_mode_sense10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 LLBAA:1; /* long LBA accepted if set to 1 */
- u8 dbd:1; /* disable block descriptors if set
- * to 1
- */
- u8 reserved2:3;
-
- u8 pc:2; /* page control */
- u8 page_code:6;
-#else
- u8 reserved2:3;
- u8 dbd:1; /* disable block descriptors if set to
- * 1
- */
- u8 LLBAA:1; /* long LBA accepted if set to 1 */
- u8 reserved1:3;
-
- u8 page_code:6;
- u8 pc:2; /* page control */
-#endif
- u8 reserved3[4];
- u8 alloc_len_msb;
- u8 alloc_len_lsb;
- u8 control;
-};
-
-#define SCSI_CDB10_GET_AL(cdb) \
- ((cdb)->alloc_len_msb << 8 | (cdb)->alloc_len_lsb)
-
-#define SCSI_CDB10_SET_AL(cdb, al) { \
- (cdb)->alloc_len_msb = al >> 8; \
- (cdb)->alloc_len_lsb = al & 0xFF; \
-}
-
-#define SCSI_CDB6_GET_AL(cdb) ((cdb)->alloc_len)
-
-#define SCSI_CDB6_SET_AL(cdb, al) { \
- (cdb)->alloc_len = al; \
-}
-
-/*
- * page control field values
- */
-#define SCSI_PC_CURRENT_VALUES 0x0
-#define SCSI_PC_CHANGEABLE_VALUES 0x1
-#define SCSI_PC_DEFAULT_VALUES 0x2
-#define SCSI_PC_SAVED_VALUES 0x3
-
-/*
- * SCSI mode page codes
- */
-#define SCSI_MP_VENDOR_SPEC 0x00
-#define SCSI_MP_DISC_RECN 0x02 /* disconnect-reconnect page */
-#define SCSI_MP_FORMAT_DEVICE 0x03
-#define SCSI_MP_RDG 0x04 /* rigid disk geometry page */
-#define SCSI_MP_FDP 0x05 /* flexible disk page */
-#define SCSI_MP_CACHING 0x08 /* caching page */
-#define SCSI_MP_CONTROL 0x0A /* control mode page */
-#define SCSI_MP_MED_TYPES_SUP 0x0B /* medium types supported page */
-#define SCSI_MP_INFO_EXCP_CNTL 0x1C /* informational exception control */
-#define SCSI_MP_ALL 0x3F /* return all pages - mode sense only */
-
-/*
- * mode parameter header
- */
-struct scsi_mode_param_header6_s{
- u8 mode_datalen;
- u8 medium_type;
-
- /*
- * device specific parameters expanded for direct access devices
- */
-#ifdef __BIGENDIAN
- u32 wp:1; /* write protected */
- u32 reserved1:2;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved1:2;
- u32 wp:1; /* write protected */
-#endif
-
- u8 block_desclen;
-};
-
-struct scsi_mode_param_header10_s{
- u32 mode_datalen:16;
- u32 medium_type:8;
-
- /*
- * device specific parameters expanded for direct access devices
- */
-#ifdef __BIGENDIAN
- u32 wp:1; /* write protected */
- u32 reserved1:2;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 dpofua:1; /* disable page out + force unit access
- */
- u32 reserved1:2;
- u32 wp:1; /* write protected */
-#endif
-
-#ifdef __BIGENDIAN
- u32 reserved3:7;
- u32 longlba:1;
-#else
- u32 longlba:1;
- u32 reserved3:7;
-#endif
- u32 reserved4:8;
- u32 block_desclen:16;
-};
-
-/*
- * mode parameter block descriptor
- */
-struct scsi_mode_param_desc_s{
- u32 nblks;
- u32 density_code:8;
- u32 block_length:24;
-};
-
-/*
- * Disconnect-reconnect mode page format
- */
-struct scsi_mp_disc_recn_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
- u8 buf_full_ratio;
- u8 buf_empty_ratio;
-
- u8 bil_msb; /* bus inactivity limit -MSB */
- u8 bil_lsb; /* bus inactivity limit -LSB */
-
- u8 dtl_msb; /* disconnect time limit - MSB */
- u8 dtl_lsb; /* disconnect time limit - LSB */
-
- u8 ctl_msb; /* connect time limit - MSB */
- u8 ctl_lsb; /* connect time limit - LSB */
-
- u8 max_burst_len_msb;
- u8 max_burst_len_lsb;
-#ifdef __BIGENDIAN
- u8 emdp:1; /* enable modify data pointers */
- u8 fa:3; /* fair arbitration */
- u8 dimm:1; /* disconnect immediate */
- u8 dtdc:3; /* data transfer disconnect control */
-#else
- u8 dtdc:3; /* data transfer disconnect control */
- u8 dimm:1; /* disconnect immediate */
- u8 fa:3; /* fair arbitration */
- u8 emdp:1; /* enable modify data pointers */
-#endif
-
- u8 reserved3;
-
- u8 first_burst_len_msb;
- u8 first_burst_len_lsb;
-};
-
-/*
- * SCSI format device mode page
- */
-struct scsi_mp_format_device_s{
-#ifdef __BIGENDIAN
- u32 ps:1;
- u32 reserved1:1;
- u32 page_code:6;
-#else
- u32 page_code:6;
- u32 reserved1:1;
- u32 ps:1;
-#endif
- u32 page_len:8;
- u32 tracks_per_zone:16;
-
- u32 a_sec_per_zone:16;
- u32 a_tracks_per_zone:16;
-
- u32 a_tracks_per_lun:16; /* alternate tracks/lun-MSB */
- u32 sec_per_track:16; /* sectors/track-MSB */
-
- u32 bytes_per_sector:16;
- u32 interleave:16;
-
- u32 tsf:16; /* track skew factor-MSB */
- u32 csf:16; /* cylinder skew factor-MSB */
-
-#ifdef __BIGENDIAN
- u32 ssec:1; /* soft sector formatting */
- u32 hsec:1; /* hard sector formatting */
- u32 rmb:1; /* removable media */
- u32 surf:1; /* surface */
- u32 reserved2:4;
-#else
- u32 reserved2:4;
- u32 surf:1; /* surface */
- u32 rmb:1; /* removable media */
- u32 hsec:1; /* hard sector formatting */
- u32 ssec:1; /* soft sector formatting */
-#endif
- u32 reserved3:24;
-};
-
-/*
- * SCSI rigid disk device geometry page
- */
-struct scsi_mp_rigid_device_geometry_s{
-#ifdef __BIGENDIAN
- u32 ps:1;
- u32 reserved1:1;
- u32 page_code:6;
-#else
- u32 page_code:6;
- u32 reserved1:1;
- u32 ps:1;
-#endif
- u32 page_len:8;
- u32 num_cylinders0:8;
- u32 num_cylinders1:8;
-
- u32 num_cylinders2:8;
- u32 num_heads:8;
- u32 scwp0:8;
- u32 scwp1:8;
-
- u32 scwp2:8;
- u32 scrwc0:8;
- u32 scrwc1:8;
- u32 scrwc2:8;
-
- u32 dsr:16;
- u32 lscyl0:8;
- u32 lscyl1:8;
-
- u32 lscyl2:8;
-#ifdef __BIGENDIAN
- u32 reserved2:6;
- u32 rpl:2; /* rotational position locking */
-#else
- u32 rpl:2; /* rotational position locking */
- u32 reserved2:6;
-#endif
- u32 rot_off:8;
- u32 reserved3:8;
-
- u32 med_rot_rate:16;
- u32 reserved4:16;
-};
-
-/*
- * SCSI caching mode page
- */
-struct scsi_mp_caching_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 res1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 res1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 ic:1; /* initiator control */
- u8 abpf:1; /* abort pre-fetch */
- u8 cap:1; /* caching analysis permitted */
- u8 disc:1; /* discontinuity */
- u8 size:1; /* size enable */
- u8 wce:1; /* write cache enable */
- u8 mf:1; /* multiplication factor */
- u8 rcd:1; /* read cache disable */
-
- u8 drrp:4; /* demand read retention priority */
- u8 wrp:4; /* write retention priority */
-#else
- u8 rcd:1; /* read cache disable */
- u8 mf:1; /* multiplication factor */
- u8 wce:1; /* write cache enable */
- u8 size:1; /* size enable */
- u8 disc:1; /* discontinuity */
- u8 cap:1; /* caching analysis permitted */
- u8 abpf:1; /* abort pre-fetch */
- u8 ic:1; /* initiator control */
-
- u8 wrp:4; /* write retention priority */
- u8 drrp:4; /* demand read retention priority */
-#endif
- u8 dptl[2];/* disable pre-fetch transfer length */
- u8 min_prefetch[2];
- u8 max_prefetch[2];
- u8 max_prefetch_limit[2];
-#ifdef __BIGENDIAN
- u8 fsw:1; /* force sequential write */
- u8 lbcss:1;/* logical block cache segment size */
- u8 dra:1; /* disable read ahead */
- u8 vs:2; /* vendor specific */
- u8 res2:3;
-#else
- u8 res2:3;
- u8 vs:2; /* vendor specific */
- u8 dra:1; /* disable read ahead */
- u8 lbcss:1;/* logical block cache segment size */
- u8 fsw:1; /* force sequential write */
-#endif
- u8 num_cache_segs;
-
- u8 cache_seg_size[2];
- u8 res3;
- u8 non_cache_seg_size[3];
-};
-
-/*
- * SCSI control mode page
- */
-struct scsi_mp_control_page_s{
-#ifdef __BIGENDIAN
-u8 ps:1;
-u8 reserved1:1;
-u8 page_code:6;
-#else
-u8 page_code:6;
-u8 reserved1:1;
-u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 tst:3; /* task set type */
- u8 reserved3:3;
- u8 gltsd:1; /* global logging target save disable */
- u8 rlec:1; /* report log exception condition */
-
- u8 qalgo_mod:4; /* queue alogorithm modifier */
- u8 reserved4:1;
- u8 qerr:2; /* queue error management */
- u8 dque:1; /* disable queuing */
-
- u8 reserved5:1;
- u8 rac:1; /* report a check */
- u8 reserved6:2;
- u8 swp:1; /* software write protect */
- u8 raerp:1; /* ready AER permission */
- u8 uaaerp:1; /* unit attenstion AER permission */
- u8 eaerp:1; /* error AER permission */
-
- u8 reserved7:5;
- u8 autoload_mod:3;
-#else
- u8 rlec:1; /* report log exception condition */
- u8 gltsd:1; /* global logging target save disable */
- u8 reserved3:3;
- u8 tst:3; /* task set type */
-
- u8 dque:1; /* disable queuing */
- u8 qerr:2; /* queue error management */
- u8 reserved4:1;
- u8 qalgo_mod:4; /* queue alogorithm modifier */
-
- u8 eaerp:1; /* error AER permission */
- u8 uaaerp:1; /* unit attenstion AER permission */
- u8 raerp:1; /* ready AER permission */
- u8 swp:1; /* software write protect */
- u8 reserved6:2;
- u8 rac:1; /* report a check */
- u8 reserved5:1;
-
- u8 autoload_mod:3;
- u8 reserved7:5;
-#endif
- u8 rahp_msb; /* ready AER holdoff period - MSB */
- u8 rahp_lsb; /* ready AER holdoff period - LSB */
-
- u8 busy_timeout_period_msb;
- u8 busy_timeout_period_lsb;
-
- u8 ext_selftest_compl_time_msb;
- u8 ext_selftest_compl_time_lsb;
-};
-
-/*
- * SCSI medium types supported mode page
- */
-struct scsi_mp_medium_types_sup_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-
- u8 reserved3[2];
- u8 med_type1_sup; /* medium type one supported */
- u8 med_type2_sup; /* medium type two supported */
- u8 med_type3_sup; /* medium type three supported */
- u8 med_type4_sup; /* medium type four supported */
-};
-
-/*
- * SCSI informational exception control mode page
- */
-struct scsi_mp_info_excpt_cntl_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-#ifdef __BIGENDIAN
- u8 perf:1; /* performance */
- u8 reserved3:1;
- u8 ebf:1; /* enable background fucntion */
- u8 ewasc:1; /* enable warning */
- u8 dexcpt:1; /* disable exception control */
- u8 test:1; /* enable test device failure
- * notification
- */
- u8 reserved4:1;
- u8 log_error:1;
-
- u8 reserved5:4;
- u8 mrie:4; /* method of reporting info
- * exceptions
- */
-#else
- u8 log_error:1;
- u8 reserved4:1;
- u8 test:1; /* enable test device failure
- * notification
- */
- u8 dexcpt:1; /* disable exception control */
- u8 ewasc:1; /* enable warning */
- u8 ebf:1; /* enable background fucntion */
- u8 reserved3:1;
- u8 perf:1; /* performance */
-
- u8 mrie:4; /* method of reporting info
- * exceptions
- */
- u8 reserved5:4;
-#endif
- u8 interval_timer_msb;
- u8 interval_timer_lsb;
-
- u8 report_count_msb;
- u8 report_count_lsb;
-};
-
-/*
- * Methods of reporting informational exceptions
- */
-#define SCSI_MP_IEC_NO_REPORT 0x0 /* no reporting of exceptions */
-#define SCSI_MP_IEC_AER 0x1 /* async event reporting */
-#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attenstion */
-#define SCSI_MO_IEC_COND_REC_ERR 0x3 /* conditionally generate recovered
- * error
- */
-#define SCSI_MP_IEC_UNCOND_REC_ERR 0x4 /* unconditionally generate recovered
- * error
- */
-#define SCSI_MP_IEC_NO_SENSE 0x5 /* generate no sense */
-#define SCSI_MP_IEC_ON_REQUEST 0x6 /* only report exceptions on request */
-
-/*
- * SCSI flexible disk page
- */
-struct scsi_mp_flexible_disk_s{
-#ifdef __BIGENDIAN
- u8 ps:1;
- u8 reserved1:1;
- u8 page_code:6;
-#else
- u8 page_code:6;
- u8 reserved1:1;
- u8 ps:1;
-#endif
- u8 page_len;
-
- u8 transfer_rate_msb;
- u8 transfer_rate_lsb;
-
- u8 num_heads;
- u8 num_sectors;
-
- u8 bytes_per_sector_msb;
- u8 bytes_per_sector_lsb;
-
- u8 num_cylinders_msb;
- u8 num_cylinders_lsb;
-
- u8 sc_wpc_msb; /* starting cylinder-write
- * precompensation msb
- */
- u8 sc_wpc_lsb; /* starting cylinder-write
- * precompensation lsb
- */
- u8 sc_rwc_msb; /* starting cylinder-reduced write
- * current msb
- */
- u8 sc_rwc_lsb; /* starting cylinder-reduced write
- * current lsb
- */
-
- u8 dev_step_rate_msb;
- u8 dev_step_rate_lsb;
-
- u8 dev_step_pulse_width;
-
- u8 head_sd_msb; /* head settle delay msb */
- u8 head_sd_lsb; /* head settle delay lsb */
-
- u8 motor_on_delay;
- u8 motor_off_delay;
-#ifdef __BIGENDIAN
- u8 trdy:1; /* true ready bit */
- u8 ssn:1; /* start sector number bit */
- u8 mo:1; /* motor on bit */
- u8 reserved3:5;
-
- u8 reserved4:4;
- u8 spc:4; /* step pulse per cylinder */
-#else
- u8 reserved3:5;
- u8 mo:1; /* motor on bit */
- u8 ssn:1; /* start sector number bit */
- u8 trdy:1; /* true ready bit */
-
- u8 spc:4; /* step pulse per cylinder */
- u8 reserved4:4;
-#endif
- u8 write_comp;
- u8 head_load_delay;
- u8 head_unload_delay;
-#ifdef __BIGENDIAN
- u8 pin34:4; /* pin34 usage */
- u8 pin2:4; /* pin2 usage */
-
- u8 pin4:4; /* pin4 usage */
- u8 pin1:4; /* pin1 usage */
-#else
- u8 pin2:4; /* pin2 usage */
- u8 pin34:4; /* pin34 usage */
-
- u8 pin1:4; /* pin1 usage */
- u8 pin4:4; /* pin4 usage */
-#endif
- u8 med_rot_rate_msb;
- u8 med_rot_rate_lsb;
-
- u8 reserved5[2];
-};
-
-struct scsi_mode_page_format_data6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_format_device_s format; /* format device data */
-};
-
-struct scsi_mode_page_format_data10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_format_device_s format; /* format device data */
-};
-
-struct scsi_mode_page_rdg_data6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_rigid_device_geometry_s rdg;
- /* rigid geometry data */
-};
-
-struct scsi_mode_page_rdg_data10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_rigid_device_geometry_s rdg;
- /* rigid geometry data */
-};
-
-struct scsi_mode_page_cache6_s{
- struct scsi_mode_param_header6_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_caching_s cache; /* cache page data */
-};
-
-struct scsi_mode_page_cache10_s{
- struct scsi_mode_param_header10_s mph; /* mode page header */
- struct scsi_mode_param_desc_s desc; /* block descriptor */
- struct scsi_mp_caching_s cache; /* cache page data */
-};
-
-/* --------------------------------------------------------------
- * Format Unit command
- * ------------------------------------------------------------
- */
-
-/*
- * Format Unit CDB
- */
-struct scsi_format_unit_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 res1:3;
- u8 fmtdata:1; /* if set, data out phase has format
- * data
- */
- u8 cmplst:1; /* if set, defect list is complete */
- u8 def_list:3; /* format of defect descriptor is
- * fmtdata =1
- */
-#else
- u8 def_list:3; /* format of defect descriptor is
- * fmtdata = 1
- */
- u8 cmplst:1; /* if set, defect list is complete */
- u8 fmtdata:1; /* if set, data out phase has format
- * data
- */
- u8 res1:3;
-#endif
- u8 interleave_msb;
- u8 interleave_lsb;
- u8 vendor_spec;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_reserve6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved:3;
- u8 obsolete:4;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 obsolete:4;
- u8 reserved:3;
-#endif
- u8 reservation_id;
- u16 param_list_len;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_release6_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 obsolete:4;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 obsolete:4;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u16 reserved2;
- u8 control;
-};
-
-/*
- * h
- */
-struct scsi_reserve10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 third_party:1;
- u8 reserved2:2;
- u8 long_id:1;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 long_id:1;
- u8 reserved2:2;
- u8 third_party:1;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u8 third_pty_dev_id;
- u8 reserved3;
- u8 reserved4;
- u8 reserved5;
- u16 param_list_len;
- u8 control;
-};
-
-struct scsi_release10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 third_party:1;
- u8 reserved2:2;
- u8 long_id:1;
- u8 extent:1;
-#else
- u8 extent:1;
- u8 long_id:1;
- u8 reserved2:2;
- u8 third_party:1;
- u8 reserved1:3;
-#endif
- u8 reservation_id;
- u8 third_pty_dev_id;
- u8 reserved3;
- u8 reserved4;
- u8 reserved5;
- u16 param_list_len;
- u8 control;
-};
-
-struct scsi_verify10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 dpo:1;
- u8 reserved:2;
- u8 bytchk:1;
- u8 reladdr:1;
-#else
- u8 reladdr:1;
- u8 bytchk:1;
- u8 reserved:2;
- u8 dpo:1;
- u8 lun:3;
-#endif
- u8 lba0;
- u8 lba1;
- u8 lba2;
- u8 lba3;
- u8 reserved1;
- u8 verification_len0;
- u8 verification_len1;
- u8 control_byte;
-};
-
-struct scsi_request_sense_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 lun:3;
- u8 reserved:5;
-#else
- u8 reserved:5;
- u8 lun:3;
-#endif
- u8 reserved0;
- u8 reserved1;
- u8 alloc_len;
- u8 control_byte;
-};
-
-/* ------------------------------------------------------------
- * SCSI status byte values
- * ------------------------------------------------------------
- */
-#define SCSI_STATUS_GOOD 0x00
-#define SCSI_STATUS_CHECK_CONDITION 0x02
-#define SCSI_STATUS_CONDITION_MET 0x04
-#define SCSI_STATUS_BUSY 0x08
-#define SCSI_STATUS_INTERMEDIATE 0x10
-#define SCSI_STATUS_ICM 0x14 /* intermediate condition met */
-#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
-#define SCSI_STATUS_COMMAND_TERMINATED 0x22
-#define SCSI_STATUS_QUEUE_FULL 0x28
-#define SCSI_STATUS_ACA_ACTIVE 0x30
-
-#define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length
- * in CDBs
- */
-
-#define SCSI_OP_WRITE_VERIFY10 0x2E
-#define SCSI_OP_WRITE_VERIFY12 0xAE
-#define SCSI_OP_UNDEF 0xFF
-
-/*
- * SCSI WRITE-VERIFY(10) command
- */
-struct scsi_write_verify10_s{
- u8 opcode;
-#ifdef __BIGENDIAN
- u8 reserved1:3;
- u8 dpo:1; /* Disable Page Out */
- u8 reserved2:1;
- u8 ebp:1; /* erse by-pass */
- u8 bytchk:1; /* byte check */
- u8 rel_adr:1; /* relative address */
-#else
- u8 rel_adr:1; /* relative address */
- u8 bytchk:1; /* byte check */
- u8 ebp:1; /* erse by-pass */
- u8 reserved2:1;
- u8 dpo:1; /* Disable Page Out */
- u8 reserved1:3;
-#endif
- u8 lba0; /* logical block address - MSB */
- u8 lba1;
- u8 lba2;
- u8 lba3; /* LSB */
- u8 reserved3;
- u8 xfer_length0; /* transfer length in blocks - MSB */
- u8 xfer_length1; /* LSB */
- u8 control;
-};
-
-#pragma pack()
-
-#endif /* __SCSI_H__ */
diff --git a/drivers/scsi/bfa/include/protocol/types.h b/drivers/scsi/bfa/include/protocol/types.h
deleted file mode 100644
index 2875a6c..0000000
--- a/drivers/scsi/bfa/include/protocol/types.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/**
- * types.h Protocol defined base types
- */
-
-#ifndef __TYPES_H__
-#define __TYPES_H__
-
-#include <bfa_os_inc.h>
-
-#define wwn_t u64
-#define lun_t u64
-
-#define WWN_NULL (0)
-#define FC_SYMNAME_MAX 256 /* max name server symbolic name size */
-#define FC_ALPA_MAX 128
-
-#pragma pack(1)
-
-#define MAC_ADDRLEN (6)
-struct mac_s { u8 mac[MAC_ADDRLEN]; };
-#define mac_t struct mac_s
-
-#pragma pack()
-
-#endif
--
1.7.3.rc1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
