Re: [PATCH 1/5] scsi: megaraid_sas - Add Online Controller Reset to MegaRAID SAS driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2010-08-11 at 16:45 -0400, bo yang wrote:
> To add the Online Controller Reset  (OCR) support, driver need to do:
> 		a). reset the controller chips -- Xscale and Gen2 which will change
> the function calls and add the reset function
> 		related to this two chips.
> 		
> 		b). during the reset, driver will store the pending cmds which not
> returned by FW to driver's pending queue.  Driver
> 		will re-issue those pending cmds again to FW after the OCR finished.
> 		
> 		c). In driver's timeout routine, driver will report to OS as reset.
> Also driver's queue routine will block the
> 		cmds until the OCR finished.
> 		
> 		d). in Driver's ISR routine, if driver get the FW state as state
> change, FW in Failure status and FW support online controller
> 		reset (OCR), driver will start to do the controller reset.
> 		
> 		e). In driver's IOCTL routine, the application cmds will wait for
> the OCR to finish, then issue the cmds to FW.
> 
> Signed-off-by Bo Yang<bo.yang@xxxxxxx>

This patch is full of line breaks which prevent application, like this
one:

> diff -rupN old/Documentation/scsi/ChangeLog.megaraid_sas
> new/Documentation/scsi/ChangeLog.megaraid_sas
> --- old/Documentation/scsi/ChangeLog.megaraid_sas	2010-08-10
> 04:58:36.000000000 -0400
> +++ new/Documentation/scsi/ChangeLog.megaraid_sas	2010-08-10
> 04:56:30.000000000 -0400
> @@ -1,3 +1,36 @@
> +1 Release Date    : Thur.  May 03, 2010 09:12:45 PST 2009 -
> +			(emaild-id:megaraidlinux@xxxxxxx)
> +			Bo Yang
[snip]

and this one
> diff -rupN old/drivers/scsi/megaraid/megaraid_sas.c
> new/drivers/scsi/megaraid/megaraid_sas.c
> --- old/drivers/scsi/megaraid/megaraid_sas.c	2010-08-10 04:55:41.000000000 -0400
> +++ new/drivers/scsi/megaraid/megaraid_sas.c	2010-08-10 04:56:30.000000000 -0400
> @@ -107,6 +107,12 @@ static void
>  megasas_complete_cmd(struct megasas_instance *instance, struct
> megasas_cmd *cmd,
>  		     u8 alt_status);

Since not every long line is broken, this looks like some type of cut
and paste error ... anyway, could you fix it up, please?

Thanks,

James


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux