[PATCH 1/1] ipr: reverse the isr optimization changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The isr optimization patch that was submitted a few months ago
exposed problems with receiving and handling spurious HRRQ interrutps.

http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commit;h=64ffdb762241c0a9c0c8fac7ea92aa0ba1529334

That patch is reverted with this one.  A new patch will be submitted
once the issue is better understood and properly handled in the driver.

Signed-off-by: Wayne Boyer <wayneb@xxxxxxxxxxxxxxxxxx>
---

 drivers/scsi/ipr.c |   63 +++++++++++++++++++++++++++--------------------------
 1 file changed, 33 insertions(+), 30 deletions(-)

Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c	2010-08-27 10:36:32.000000000 -0700
+++ b/drivers/scsi/ipr.c	2010-08-27 10:36:59.000000000 -0700
@@ -4936,39 +4936,15 @@ static int ipr_eh_abort(struct scsi_cmnd
 /**
  * ipr_handle_other_interrupt - Handle "other" interrupts
  * @ioa_cfg:	ioa config struct
+ * @int_reg:	interrupt register
  *
  * Return value:
  * 	IRQ_NONE / IRQ_HANDLED
  **/
-static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg)
+static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
+					      volatile u32 int_reg)
 {
 	irqreturn_t rc = IRQ_HANDLED;
-	volatile u32 int_reg, int_mask_reg;
-
-	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
-	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
-
-	/* If an interrupt on the adapter did not occur, ignore it.
-	 * Or in the case of SIS 64, check for a stage change interrupt.
-	 */
-	if ((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0) {
-		if (ioa_cfg->sis64) {
-			int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
-			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
-			if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
-
-				/* clear stage change */
-				writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
-				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
-				list_del(&ioa_cfg->reset_cmd->queue);
-				del_timer(&ioa_cfg->reset_cmd->timer);
-				ipr_reset_ioa_job(ioa_cfg->reset_cmd);
-				return IRQ_HANDLED;
-			}
-		}
-
-		return IRQ_NONE;
-	}

 	if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
 		/* Mask the interrupt */
@@ -5029,7 +5005,7 @@ static irqreturn_t ipr_isr(int irq, void
 {
 	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
 	unsigned long lock_flags = 0;
-	volatile u32 int_reg;
+	volatile u32 int_reg, int_mask_reg;
 	u32 ioasc;
 	u16 cmd_index;
 	int num_hrrq = 0;
@@ -5044,6 +5020,33 @@ static irqreturn_t ipr_isr(int irq, void
 		return IRQ_NONE;
 	}

+	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
+
+	/* If an interrupt on the adapter did not occur, ignore it.
+	 * Or in the case of SIS 64, check for a stage change interrupt.
+	 */
+	if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
+		if (ioa_cfg->sis64) {
+			int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+			if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
+
+				/* clear stage change */
+				writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+				list_del(&ioa_cfg->reset_cmd->queue);
+				del_timer(&ioa_cfg->reset_cmd->timer);
+				ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+				spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+				return IRQ_HANDLED;
+			}
+		}
+
+		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+		return IRQ_NONE;
+	}
+
 	while (1) {
 		ipr_cmd = NULL;

@@ -5083,7 +5086,7 @@ static irqreturn_t ipr_isr(int irq, void
 			/* Clear the PCI interrupt */
 			do {
 				writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
-				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
 			} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
 					num_hrrq++ < IPR_MAX_HRRQ_RETRIES);

@@ -5098,7 +5101,7 @@ static irqreturn_t ipr_isr(int irq, void
 	}

 	if (unlikely(rc == IRQ_NONE))
-		rc = ipr_handle_other_interrupt(ioa_cfg);
+		rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);

 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	return rc;

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux